参数资料
| 型号： | LT6411CUD#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 15/16页 |
| 文件大小： | 0K |
| 描述： | IC ADC DRVR/GAIN AMP 16-QFN |
| 标准包装： | 2,500 |
| 放大器类型： | 通用 |
| 电路数： | 2 |
| 输出类型： | 差分 |
| 转换速率： | 3300 V/µs |
| -3db带宽： | 650MHz |
| 电流 - 输入偏压： | 17µA |
| 电压 - 输入偏移： | 3000µV |
| 电流 - 电源： | 8mA |
| 电流 - 输出 / 通道： | 105mA |
| 电压 - 电源，单路/双路(±)： | 4.5 V ~ 12 V，±2.25 V ~ 6 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-WFQFN 裸露焊盘 |
| 供应商设备封装： | 16-QFN-EP（3x3） |
| 包装： | 带卷 (TR) |
LT6411
8
6411f
PIN FUNCTIONS
VEE (Pins 1, 2): Negative Supply Voltage. VEE pins are not
internally connected to each other and must all be con-
nected externally. Proper supply bypassing is necessary
for best performance. See the Applications Information
section.
VEE (Pins 3, 7): Negative Supply Voltage for Output Stage.
VEE pins are not internally connected to each other and
must all be connected externally. Proper supply bypassing
is necessary for best performance. See the Applications
Information section.
NC (Pin 4): This pin is not internally connected.
OUT2 (Pin 5): Output of Channel 2. The gain between the
input and the output of this channel is set by the connection
of the channel 2 input pins. See Table 1 in Applications
Information for details.
VCC (Pins 6, 9): Positive Supply Voltage for Output Stage.
VCC pins are not internally connected to each other and
must all be connected externally. Proper supply bypassing
is necessary for best performance. See the Applications
Information section.
OUT1 (Pin 8): Output of Channel 1. The gain between the
input and the output of this channel is set by the connection
of the channel 1 input pins. See Table 1 in Applications
Information for details.
VCC (Pin 10): Positive Supply Voltage. VCC pins are not
internally connected to each other and must all be con-
nected externally. Proper supply bypassing is necessary
for best performance. See the Applications Information
section.
EN (Pin 11): Enable Control Pin. An internal pull-up resis-
tor of 46k will turn the part off if the pin is allowed to oat
and denes the pin’s impedance. When the pin is pulled
low, the part is enabled.
DGND (Pin 12): Digital Ground Reference for Enable Pin.
This pin is normally connected to ground.
IN1+ (Pin 13): Channel 1 Positive Input. This pin has a
nominal impedance of 400k
Ωanddoesnothaveaninternal
termination resistor.
IN1– (Pin 14): This pin connects to the internal resistor
network of the channel 1 amplier, connecting by a 370
Ω
resistor to the inverting input.
IN2– (Pin 15): This pin connects to the internal resistor
network of the channel 2 amplier, connecting by a 370
Ω
resistor to the inverting input.
IN2+ (Pin 16): Channel 2 Positive Input. This pin has a
nominal impedance of 400k
Ωanddoesnothaveaninternal
termination resistor.
Exposed Pad (Pin 17): The pad is internally connected to
VEE (Pin 1). If split supplies are used, do not tie the pad
to ground.
相关PDF资料 |
PDF描述 |
|---|---|
| LT6600CS8-15#TRPBF | IC AMP DIFF LP FLTR 15MHZ 8-SOIC |
| LT6600CS8-5#TRPBF | IC AMP DIFF LP FLTR 5MHZ 8-SOIC |
| LT6600IS8-10 | IC AMP DIFF 10MHZ LP FLTR 8-SOIC |
| LT6600IS8-2.5#PBF | IC AMP DIFF LP FLTR 2.5MHZ 8SOIC |
| LT6600IS8-20 | IC AMP DIFF LP FLTR 20MHZ 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT6411IUD | 制造商:LINER 制造商全称:Linear Technology 功能描述:650MHz Differential ADC Driver/Dual Selectable Gain Amplifi er |
| LT6411IUD#PBF | 功能描述:IC ADC DRVR/GAIN AMP 16-QFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:2 输出类型:满摆幅 转换速率:350 V/µs 增益带宽积:180MHz -3db带宽:320MHz 电流 - 输入偏压:12.5µA 电压 - 输入偏移:800µV 电流 - 电源:15mA 电流 - 输出 / 通道:85mA 电压 - 电源，单路/双路(±):2.5 V ~ 12.6 V，±1.25 V ~ 6.3 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-MSOP 包装:带卷 (TR) |
| LT6411IUD#TRPBF | 功能描述:IC ADC DRVR/GAIN AMP 16-QFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:1 系列:- 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.028 V/µs 增益带宽积:105kHz -3db带宽:- 电流 - 输入偏压:3nA 电压 - 输入偏移:100µV 电流 - 电源:3.3µA 电流 - 输出 / 通道:12mA 电压 - 电源，单路/双路(±):2.7 V ~ 12 V，±1.35 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:剪切带 (CT) 其它名称:OP481GRUZ-REELCT |
| LT6412 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:UNDERSTANDING THE SUBJECT IS CUSTOMER SERVICE |
| LT6413 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:UNDERSTANDING THE SUBJECT IS CUSTOMER SERVICE |
发布紧急采购，3分钟左右您将得到回复。