- 您现在的位置：买卖IC网 > PDF目录3480 > LT6600CS8-2.5#TR (Linear Technology)IC AMP DIFF LP FLTR 2.5MHZ 8SOIC PDF资料下载
参数资料
| 型号： | LT6600CS8-2.5#TR |
| 厂商： | Linear Technology |
| 文件页数： | 14/16页 |
| 文件大小： | 0K |
| 描述： | IC AMP DIFF LP FLTR 2.5MHZ 8SOIC |
| 标准包装： | 2,500 |
| 放大器类型： | 差分 |
| 电路数： | 1 |
| 输出类型： | 差分 |
| 电流 - 输入偏压： | 15µA |
| 电压 - 输入偏移： | 5000µV |
| 电流 - 电源： | 28mA |
| 电压 - 电源，单路/双路(±)： | 3 V ~ 11 V，±1.5 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 带卷 (TR) |
LT6600-2.5
7
660025fe
PIN FUNCTIONS
IN– and IN+ (Pins 1, 12/Pins 1, 8): Input Pins. Signals can
be applied to either or both input pins through identical
external resistors, RIN. The DC gain from differential inputs
to the differential outputs is 1580Ω/RIN.
NC (Pins 2, 5, 11/NA): No Connection
VOCM (Pin 3/Pin 2): DC Common Mode Reference Voltage-
for the 2nd Filter Stage. Its value programs the common
mode voltage of the differential output of the lter. This
is a high impedance input, which can be driven from an
external voltage reference, or it can be tied to VMID on the
PC board. VOCM should be bypassed with a 0.01μF ceramic
capacitor unless it is connected to a ground plane.
V+ and V– (Pins 4, 8, 9/Pins 3, 6):
Power Supply Pins. For
a single 3.3V or 5V supply (V– grounded) a quality 0.1μF
ceramic bypass capacitor is required from the positive
supply pin (V+) to the negative supply pin (V–). The bypass
should be as close as possible to the IC. For dual supply
applications, bypass V+ to ground and V– to ground with
a quality 0.1μF ceramic capacitor.
OUT+ and OUT– (Pins 6, 7/Pins 4, 5):
Output Pins. These
are the lter differential outputs. Each pin can drive a 100Ω
and/or 50pF load to AC ground.
VMID (Pin 10/Pin 7): The VMID pin is internally biased at
mid-supply, see Block Diagram. For single supply op-
eration, the VMID pin should be bypassed with a quality
0.01μF ceramic capacitor to V–. For dual supply operation,
VMID can be bypassed or connected to a high quality DC
ground. A ground plane should be used. A poor ground
will increase noise and distortion. VMID sets the output
common mode voltage of the 1st stage of the lter. It has
a 5.5kΩ impedance, and it can be overridden with an
external low impedance voltage source.
(DFN/SO)
BLOCK DIAGRAM
–
+ –
+
VOCM
–
+
VOCM
1580Ω
800Ω
V+
V–
11k
OP AMP
PROPRIETARY
LOWPASS
FILTER STAGE
VIN
–
VIN
+
RIN
660025 BD
IN+
VOCM
V+
OUT+
OUT–
V–
VMID
IN–
相关PDF资料 |
PDF描述 |
|---|---|
| SSW-146-02-G-S | CONN RCPT .100" 46POS SNGL GOLD |
| LT1498IN8#PBF | IC OP-AMP R-R IN/OUT DUAL 8-DIP |
| 1.5KE9.1CA-E3/54 | TVS BIDIR 1.5KW 9.1V 5% 1.5KE |
| 1.5KE170CA-E3/54 | TVS BIDIR 1.5KW 170V 5% 1.5KE |
| LT1498IN8 | IC OP-AMP R-R IN/OUT DUAL 8-DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT6600CS8-5 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Very Low Noise, Differential Amplifi er and 5MHz Lowpass Filter |
| LT6600CS8-5#PBF | 功能描述:IC AMP DIFF LP FLTR 5MHZ 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:100 系列:- 放大器类型:通用 电路数:1 输出类型:- 转换速率:0.2 V/µs 增益带宽积:- -3db带宽:- 电流 - 输入偏压:100pA 电压 - 输入偏移:30µV 电流 - 电源:380µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):±2 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:管件 |
| LT6600CS8-5#TRPBF | 功能描述:IC AMP DIFF LP FLTR 5MHZ 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:50 系列:- 放大器类型:J-FET 电路数:2 输出类型:- 转换速率:3.5 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:30pA 电压 - 输入偏移:2000µV 电流 - 电源:200µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):7 V ~ 36 V，±3.5 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-PDIP 包装:管件 |
| LT6600CS8-5PBF | 制造商:Linear Technology 功能描述:Differential Amp 5MHz LP Filter SOIC8 |
| LT6600CS8-5-PBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Very Low Noise, Differential Amplifi er and 5MHz Lowpass Filter |
发布紧急采购，3分钟左右您将得到回复。