- 您现在的位置：买卖IC网 > PDF目录6037 > LT6600IS8-20#PBF (Linear Technology)IC AMP DIFF LP FLTR 20MHZ 8-SOIC PDF资料下载
参数资料
| 型号： | LT6600IS8-20#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 9/12页 |
| 文件大小： | 0K |
| 描述： | IC AMP DIFF LP FLTR 20MHZ 8-SOIC |
| 标准包装： | 100 |
| 放大器类型： | 差分 |
| 电路数： | 1 |
| 输出类型： | 差分 |
| 电流 - 输入偏压： | 50µA |
| 电压 - 输入偏移： | 10000µV |
| 电流 - 电源： | 46mA |
| 电压 - 电源，单路/双路(±)： | 3 V ~ 11 V，±1.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 管件 |
| 产品目录页面： | 1322 (CN2011-ZH PDF) |
LT6600-20
6
66002fb
PIN FUNCTIONS
IN– and IN+ (Pins 1, 8): Input Pins. Signals can be ap-
plied to either or both input pins through identical external
resistors, RIN. The DC gain from differential inputs to the
differential outputs is 402Ω/RIN.
VOCM (Pin 2): Is the DC Common Mode Reference Voltage-
for the 2nd Filter Stage. Its value programs the common
mode voltage of the differential output of the lter. Pin 2 is a
high impedance input, which can be driven from an external
voltage reference, or Pin 2 can be tied to Pin 7 on the PC
board. Pin 2 should be bypassed with a 0.01μF ceramic
capacitor unless it is connected to a ground plane.
V+ and V– (Pins 3, 6):
Power Supply Pins. For a single
3.3V or 5V supply (Pin 6 grounded) a quality 0.1μF ceramic
bypass capacitor is required from the positive supply pin
(Pin 3) to the negative supply pin (Pin 6). The bypass
should be as close as possible to the IC. For dual supply
applications, bypass Pin 3 to ground and Pin 6 to ground
with a quality 0.1μF ceramic capacitor.
OUT+ and OUT– (Pins 4, 5):
Output Pins. Pins 4 and 5 are
the lter differential outputs. Each pin can drive a 100Ω
and/or 50pF load.
VMID (Pin 7): The VMID pin is internally biased at mid-
supply, see block diagram. For single supply operation,
the VMID pin should be bypassed with a quality 0.01μF
ceramic capacitor to Pin 6. For dual supply operation,
Pin 7 can be bypassed or connected to a high quality DC
ground. A ground plane should be used. A poor ground
will increase noise and distortion. Pin 7 sets the output
common mode voltage of the 1st stage of the lter. It has
a 5.5kΩ impedance, and it can be overridden with an
external low impedance voltage source.
BLOCK DIAGRAM
–
+ –
+
VOCM
–
+
VOCM
402Ω
200Ω
1
2
3
4
V+
V–
11k
8
7
6
5
OP AMP
PROPRIETARY
LOWPASS
FILTER STAGE
VIN
–
VIN
+
RIN
66002 BD
IN+
VOCM
V+
OUT+
OUT–
V–
VMID
IN–
相关PDF资料 |
PDF描述 |
|---|---|
| LT1361CS8#PBF | IC OP-AMP HI-SPD 50MHZ DUAL8SOIC |
| M90-7011245 | CONN PLUG PNL MNT AU 12POS |
| LT1126CS8#PBF | IC OP-AMP DECOMPENSAT DUAL 8SOIC |
| M80-5S22005MQ | CONN HDR 2MM R/A W/SCREW 20POS |
| LT1498CS8#PBF | IC OP-AMP R-R IN/OUT DUAL 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT6600IS8-5 | 制造商:Linear Technology 功能描述:Differential Amplifier and Low Pass Filter 8-Pin SOIC N |
| LT6600IS8-5#PBF | 功能描述:IC AMP DIFF LP FLTR 5MHZ 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:1 系列:- 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.028 V/µs 增益带宽积:105kHz -3db带宽:- 电流 - 输入偏压:3nA 电压 - 输入偏移:100µV 电流 - 电源:3.3µA 电流 - 输出 / 通道:12mA 电压 - 电源，单路/双路(±):2.7 V ~ 12 V，±1.35 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:剪切带 (CT) 其它名称:OP481GRUZ-REELCT |
| LT6600IS8-5#TRPBF | 功能描述:IC AMP DIFF LP FLTR 5MHZ 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:73 系列:Over-The-Top® 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.07 V/µs 增益带宽积:200kHz -3db带宽:- 电流 - 输入偏压:1nA 电压 - 输入偏移:285µV 电流 - 电源:50µA 电流 - 输出 / 通道:25mA 电压 - 电源，单路/双路(±):2 V ~ 44 V，±1 V ~ 22 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-WFDFN 裸露焊盘 供应商设备封装:16-DFN-EP（5x3） 包装:管件 |
| LT6600IS8-5-PBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Very Low Noise, Differential Amplifi er and 5MHz Lowpass Filter |
| LT6600IS8-5-TR | 制造商:LINER 制造商全称:Linear Technology 功能描述:Very Low Noise, Differential Amplifi er and 5MHz Lowpass Filter |
发布紧急采购，3分钟左右您将得到回复。