参数资料
| 型号： | LT6600IS8-20 |
| 厂商： | Linear Technology |
| 文件页数： | 2/12页 |
| 文件大小： | 0K |
| 描述： | IC AMP DIFF LP FLTR 20MHZ 8-SOIC |
| 标准包装： | 100 |
| 放大器类型： | 差分 |
| 电路数： | 1 |
| 输出类型： | 差分 |
| 电流 - 输入偏压： | 50µA |
| 电压 - 输入偏移： | 10000µV |
| 电流 - 电源： | 46mA |
| 电压 - 电源，单路/双路(±)： | 3 V ~ 11 V，±1.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 管件 |
LT6600-20
10
66002fb
APPLICATIONS INFORMATION
Noise
The noise performance of the LT6600-20 can be evaluated
with the circuit of Figure 7.
Given the low noise output of the LT6600-20 and the
6dB attenuation of the transformer coupling network, it
is necessary to measure the noise oor of the spectrum
analyzer and subtract the instrument noise from the lter
noise measurement.
Example: With the IC removed and the 25Ω resistors
grounded, Figure 7, measure the total integrated noise (eS)
of the spectrum analyzer from 10kHz to 20MHz. With the
IC inserted, the signal source (VIN) disconnected, and the
input resistors grounded, measure the total integrated noise
out of the lter (eO). With the signal source connected,
set the frequency to 1MHz and adjust the amplitude until
VIN measures 100mVP-P. Measure the output amplitude,
VOUT, and compute the passband gain A = VOUT/VIN. Now
compute the input referred integratednoise (eIN) as:
eIN =
(eO)
2 –(e
S )
2
A
Table 1 lists the typical input referred integrated noise for-
various values of RIN. Figure 8 is plot of the noise spectral
density as a function of frequency for an LT6600-20 with
RIN = 402Ω using the xture of Figure 7 (the instrument
noise has been subtracted from the results).
Table 1. Noise Performance
PASSBAND
GAIN (V/V)
RIN
INPUT REFERRED
INTEGRATED NOISE
10kHz TO 20MHz
INPUT REFERRED
NOISE dBm/Hz
4
100Ω
42μVRMS
–148
2
200Ω
67μVRMS
–143
1
402Ω
118μVRMS
–139
The noise at each output is comprised of a differential
component and a common mode component. Using a
transformer or combiner to convert the differential outputs
to single-ended signal rejects the common mode noise and
gives a true measure of the S/N achievable in the system.
Conversely, if each output is measured individually and the
noise power added together, the resulting calculated noise
level will be higher than the true differential noise.
Power Dissipation
The LT6600-20 ampliers combine high speed with large-
signal currents in a small package. There is a need to
ensure that the die junction temperature does not exceed
150°C. The LT6600-20 package has Pin 6 fused to the lead
frame to enhance thermal conduction when connecting to a
ground plane or a large metal trace. Metal trace and plated
through-holes can be used to spread the heat generated by
the device to the backside of the PC board. For example,
on a 3/32" FR-4 board with 2oz copper, a total of 660
square millimeters connected to Pin 6 of the LT6600-20
(330 square millimeters on each side of the PC board)
will result in a thermal resistance,
θJA, of about 85°C/W.
Without the extra metal trace connected to the V– pin to
provide a heat sink, the thermal resistance will be around
105°C/W. Table 2 can be used as a guide when considering
thermal resistance.
Figure 7
Figure 8. Input Referred Noise, Gain = 1
FREQUENCY (MHz)
0.1
0
30
40
50
1
10
100
66002 F08
20
10
0
150
200
250
100
50
NOISE
SPECTRAL
DENSIT
Y
(nV
RMS
/√
Hz
)
INTEGRA
TED
NOISE
(μ
V
RMS
)
SPECTRAL DENSITY
INTEGRATED
VS = 5V
–
+
0.1μF
2.5V
–2.5V
–
+
LT6600-20
3
4
1
7
2
8
5
6
RIN
25Ω
66002 F07
SPECTRUM
ANALYZER
INPUT
50Ω
VIN
COILCRAFT
TTWB-1010
1:1
相关PDF资料 |
PDF描述 |
|---|---|
| LT6604IUFF-2.5#TRPBF | IC AMP DIFF LN DUAL 34-QFN |
| LT6604IUFF-5#TRPBF | IC AMP DIFF LN DUAL 34-QFN |
| LTC1047CSW#TRPBF | IC OPAMP CHOP-STBL W/CAP 16SOIC |
| LTC1049CS8#TRPBF | IC OPAMP CHOP-STBL W/CAPS 8SOIC |
| LTC1050CS8 | IC OPAMP CHOP-STBL W/CAPS 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT6600IS8-20#PBF | 功能描述:IC AMP DIFF LP FLTR 20MHZ 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:4 输出类型:- 转换速率:0.6 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:45nA 电压 - 输入偏移:2000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:40mA 电压 - 电源，单路/双路(±):3 V ~ 32 V，±1.5 V ~ 16 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) 其它名称:LM324ADTBR2G-NDLM324ADTBR2GOSTR |
| LT6600IS8-20#TR | 功能描述:IC AMP DIFF LP FLTR 20MHZ 8-SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:73 系列:Over-The-Top® 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.07 V/µs 增益带宽积:200kHz -3db带宽:- 电流 - 输入偏压:1nA 电压 - 输入偏移:285µV 电流 - 电源:50µA 电流 - 输出 / 通道:25mA 电压 - 电源，单路/双路(±):2 V ~ 44 V，±1 V ~ 22 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-WFDFN 裸露焊盘 供应商设备封装:16-DFN-EP（5x3） 包装:管件 |
| LT6600IS8-20#TRPBF | 功能描述:IC AMP DIFF LP FLTR 20MHZ 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:73 系列:Over-The-Top® 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.07 V/µs 增益带宽积:200kHz -3db带宽:- 电流 - 输入偏压:1nA 电压 - 输入偏移:285µV 电流 - 电源:50µA 电流 - 输出 / 通道:25mA 电压 - 电源，单路/双路(±):2 V ~ 44 V，±1 V ~ 22 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-WFDFN 裸露焊盘 供应商设备封装:16-DFN-EP（5x3） 包装:管件 |
| LT6600IS8-5 | 制造商:Linear Technology 功能描述:Differential Amplifier and Low Pass Filter 8-Pin SOIC N |
| LT6600IS8-5#PBF | 功能描述:IC AMP DIFF LP FLTR 5MHZ 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:1 系列:- 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.028 V/µs 增益带宽积:105kHz -3db带宽:- 电流 - 输入偏压:3nA 电压 - 输入偏移:100µV 电流 - 电源:3.3µA 电流 - 输出 / 通道:12mA 电压 - 电源，单路/双路(±):2.7 V ~ 12 V，±1.35 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:剪切带 (CT) 其它名称:OP481GRUZ-REELCT |
发布紧急采购，3分钟左右您将得到回复。