参数资料
| 型号： | LT6604CUFF-5#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 4/16页 |
| 文件大小： | 0K |
| 描述： | IC AMP DIFF LN DUAL 34-QFN |
| 标准包装： | 52 |
| 放大器类型： | 差分 |
| 电路数： | 2 |
| 输出类型： | 差分 |
| 电流 - 输入偏压： | 30µA |
| 电压 - 输入偏移： | 8000µV |
| 电流 - 电源： | 30mA |
| 电压 - 电源，单路/双路(±)： | 3 V ~ 11 V，±1.5 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 34-WFQFN 裸露焊盘 |
| 供应商设备封装： | 34-QFN-EP（4x7） |
| 包装： | 管件 |
LT6604-5
12
66045fa
APPLICATIONS INFORMATION
Noise
The noise performance of the LT6604-5 channel can be
evaluated with the circuit of Figure 7. Given the low noise
output of the LT6604-5 and the 6dB attenuation of the
transformer coupling network, it is necessary to measure
the noise oor of the spectrum analyzer and subtract the
instrument noise from the lter noise measurement.
Example: With the IC removed and the 25Ω resistors
grounded, Figure 7, measure the total integrated noise
(eS) of the spectrum analyzer from 10 kHz to 5MHz. With
the IC inserted, the signal source (VIN) disconnected, and
the input resistors grounded, measure the total integrated
noise out of the lter (eO).Withthesignalsourceconnected,
set the frequency to 1MHz and adjust the amplitude until
VIN measures 100mVP-P. Measure the output amplitude,
VOUT, and compute the passband gain A = VOUT/VIN. Now
compute the input referred integrated noise (eIN) as:
eIN =
(eO)
2 –(e
S )
2
A
Table 1 lists the typical input referred integrated noise for
various values of RIN.
Table 1. Noise Performance
PASSBAND
GAIN
RIN
INPUT REFERRED
INTEGRATED NOISE
10kHz TO 5MHz
INPUT REFERRED
NOISE dBm/Hz
4
200Ω
24μVRMS
–149
2
402Ω
38μVRMS
–145
1
806Ω
69μVRMS
–140
Figure 8 is plot of the noise spectral density as a function
of frequency for an LT6604-5 with RIN = 806Ω using the
xture of Figure 7 (the instrument noise has been sub-
tracted from the results).
The noise at each output is comprised of a differential
component and a common mode component. Using a
transformer or combiner to convert the differential outputs
to single-ended signal rejects the common mode noise and
gives a true measure of the S/N achievable in the system.
Conversely, if each output is measured individually and the
noise power added together, the resulting calculated noise
level will be higher than the true differential noise.
Power Dissipation
The LT6604-5 ampliers combine high speed with large
signal currents in a small package. There is a need to en-
sure that the die’s junction temperature does not exceed
150°C. The LT6604-5 has an exposed pad (pin 35) which
is connected to the lower supply (V–). Connecting the pad
to a ground plane helps to dissipate the heat generated
by the chip. Metal trace and plated through-holes can be
used to spread the heat generated by the device to the
backside of the PC board.
–
+
0.1μF
2.5V
–2.5V
–
+
RIN
25Ω
66045 F07
SPECTRUM
ANALYZER
INPUT
50Ω
VIN
COILCRAFT
TTWB-1010
1:1
25
27
4
34
6
2
29
7
1/2
LT6604-5
Figure 7
Figure 8. Input Referred Noise
FREQUENCY (MHz)
0.01
NOISE
DENSITY
(nV/√
Hz
)
INTEGRATED
NOISE
(μV)
100
45
40
35
30
25
20
15
10
5
0
90
80
70
60
50
40
30
20
10
0
66045 F08
0.1
10
1
INTEGRATED NOISE, GAIN = 1X
INTEGRATED NOISE, GAIN = 4X
NOISE DENSITY, GAIN = 1X
NOISE DENSITY, GAIN = 4X
相关PDF资料 |
PDF描述 |
|---|---|
| PFC-W1206LF-03-3012-B-1059 | RES PREC 30.1KOHM 333MW .1% 1206 |
| 172469-1 | CONN RCPT HSG FLAG .250 NATURAL |
| LT6604CUFF-2.5#PBF | IC AMP DIFF LN DUAL 34-QFN |
| 2-172076-6 | CONN RCPT HSG 1POS .250 BLUE |
| 2-172076-2 | CONN RCPT HSG 1POS .250 BLACK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT6604CUFF-5-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Very Low Noise, Differential Amplifi er and 5MHz Lowpass Filter |
| LT6604IUFF-10#PBF | 功能描述:IC AMP DIFF LN DUAL 34-QFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:4 输出类型:- 转换速率:0.6 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:45nA 电压 - 输入偏移:2000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:40mA 电压 - 电源，单路/双路(±):3 V ~ 32 V，±1.5 V ~ 16 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) 其它名称:LM324ADTBR2G-NDLM324ADTBR2GOSTR |
| LT6604IUFF-10#TRPBF | 功能描述:IC AMP DIFF LN DUAL 34-QFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:Excalibur™ 放大器类型:J-FET 电路数:1 输出类型:- 转换速率:45 V/µs 增益带宽积:10MHz -3db带宽:- 电流 - 输入偏压:20pA 电压 - 输入偏移:490µV 电流 - 电源:1.7mA 电流 - 输出 / 通道:48mA 电压 - 电源，单路/双路(±):4.5 V ~ 38 V，±2.25 V ~ 19 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:带卷 (TR) |
| LT6604IUFF-10-PBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Very Low Noise, Differential Amplifi er and 10MHz Lowpass Filter |
| LT6604IUFF-15#PBF | 功能描述:IC AMP DIFF LN DUAL 34-QFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:4 输出类型:- 转换速率:0.6 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:45nA 电压 - 输入偏移:2000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:40mA 电压 - 电源，单路/双路(±):3 V ~ 32 V，±1.5 V ~ 16 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) 其它名称:LM324ADTBR2G-NDLM324ADTBR2GOSTR |
发布紧急采购，3分钟左右您将得到回复。