参数资料
| 型号： | LTC1047CN8 |
| 厂商： | Linear Technology |
| 文件页数： | 9/12页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP CHOP-STBL W/CAPS 8-DIP |
| 标准包装： | 50 |
| 放大器类型： | 断路器（零漂移） |
| 电路数： | 2 |
| 转换速率： | 0.2 V/µs |
| 增益带宽积： | 200kHz |
| 电流 - 输入偏压： | 5pA |
| 电压 - 输入偏移： | 3µV |
| 电流 - 电源： | 60µA |
| 电压 - 电源，单路/双路(±)： | 4.75 V ~ 16 V，±2.38 V ~ 8 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 8-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 8-PDIP |
| 包装： | 管件 |
6
LTC1047
1047fa
Input Considerations
Frequently circuits built with parts as precise as the
LTC1047 show errors at the output far greater than the
designer expects. Rarely is the problem the op amp; more
often the surrounding circuitry is causing errors several
orders of magnitude greater than those due to the LTC1047.
Such obscure effects as leakage between pins, due to
residual solder flux and thermocouple effects between the
tin/lead solder and the copper PC board traces, can
overwhelm the pA-level bias currents and the V-level
offset of the LTC1047. For a more complete description of
these types of problems (and some advice on avoiding
them), see the LTC1051/LTC1053 data sheet.
Input Capacitance
The LTC1047 has approximately 12pF of capacitance at
each input pin. This will react with large series resistors to
form a pole at the input, degrading the LTC1047's phase
margin. The problem is especially common with
micropower parts like the LTC1047 because high value
resistors are often used to minimize power dissipation. As
a rule of thumb, bypass feedback resistors larger than 7k
with a 20pF capacitor to minimize this effect.
Aliasing
Like all sampled data systems, the LTC1047 will alias input
signals near its internal sampling frequency. The design
includes internal circuitry to minimize this effect; as a
result, most applications do not exhibit aliasing problems.
For a complete discussion of the correction circuitry and
aliasing behavior, refer to the LTC1051/LTC1053 data
sheet.
Single Supply Operation
The LTC1047 is compatible with all single supply
applications. It has an input common mode range which
includes V–, and an output which will swing within
millivolts of the negative power supply. The LTC1047 is
guaranteed functional down to 4.75V total supply,
allowing it to run from minimum TTL voltage all the way up
to 16V. See the Typical Applications section for examples
of single supply operation.
APPLICATIO S I FOR ATIO
WU
UU
相关PDF资料 |
PDF描述 |
|---|---|
| 77311-118-33LF | BERGSTIK |
| LTC1047CN8#PBF | IC OPAMP CHOP-STBL W/CAPS 8-DIP |
| 794621-2 | CONN HEADER 2POS DL R/A TIN SMD |
| OP293FS | IC OPAMP GP 35KHZ DUAL 8SOIC |
| 77311-124-20LF | BERGSTIK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1047CN8#PBF | 功能描述:IC OPAMP CHOP-STBL W/CAPS 8-DIP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:50 系列:- 放大器类型:J-FET 电路数:2 输出类型:- 转换速率:13 V/µs 增益带宽积:3MHz -3db带宽:- 电流 - 输入偏压:65pA 电压 - 输入偏移:3000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):7 V ~ 36 V，±3.5 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-PDIP 包装:管件 |
| LTC1047CS | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Micropower Chopper Stabilized Operational Amplifier with Internal Capacitors |
| LTC1047CSW | 功能描述:IC OPAMP CHOP-STBL W/CAP 16SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:150 系列:- 放大器类型:音频 电路数:2 输出类型:- 转换速率:5 V/µs 增益带宽积:12MHz -3db带宽:- 电流 - 输入偏压:100nA 电压 - 输入偏移:500µV 电流 - 电源:6mA 电流 - 输出 / 通道:50mA 电压 - 电源，单路/双路(±):4 V ~ 32 V，±2 V ~ 16 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:8-TSSOP 包装:管件 |
| LTC1047CSW#PBF | 功能描述:IC OPAMP CHOP-STBL W/CAP 16SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:4 输出类型:- 转换速率:0.6 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:45nA 电压 - 输入偏移:2000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:40mA 电压 - 电源，单路/双路(±):3 V ~ 32 V，±1.5 V ~ 16 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) 其它名称:LM324ADTBR2G-NDLM324ADTBR2GOSTR |
| LTC1047CSW#TR | 功能描述:IC OPAMP CHOP STABLE CAPS 16SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:150 系列:- 放大器类型:音频 电路数:2 输出类型:- 转换速率:5 V/µs 增益带宽积:12MHz -3db带宽:- 电流 - 输入偏压:100nA 电压 - 输入偏移:500µV 电流 - 电源:6mA 电流 - 输出 / 通道:50mA 电压 - 电源，单路/双路(±):4 V ~ 32 V，±2 V ~ 16 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:8-TSSOP 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。