- 您现在的位置：买卖IC网 > PDF目录30768 > LTC1174CS8#TR-5 (LINEAR TECHNOLOGY CORP) SWITCHING REGULATOR, 200 kHz SWITCHING FREQ-MAX, PDSO8 PDF资料下载
参数资料
| 型号： | LTC1174CS8#TR-5 |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 稳压器 |
| 英文描述： | SWITCHING REGULATOR, 200 kHz SWITCHING FREQ-MAX, PDSO8 |
| 封装： | 0.150 INCH, PLASTIC, SO-8 |
| 文件页数： | 18/20页 |
| 文件大小： | 241K |
| 代理商： | LTC1174CS8#TR-5 |
7
LTC1174
LTC1174-3.3/LTC1174-5
Inductor Core Selection
With the value of L selected, the type of inductor must be
chosen. Basically there are two kinds of losses in an
inductor, core and copper
Core losses are dependent on the peak-to-peak ripple
current and the core material. However it is independent of
the physical size of the core. By increasing the inductance
the inductor’s peak-to-peak ripple current will decrease,
therefore reducing core loss. Utilizing low core loss mate-
rial, such as molypermalloy or Kool M
will allow users to
concentrate on reducing copper loss and preventing satu-
ration. Figure 1 shows the effect of different core material on
the efficiency of the LTC1174. The CTX core is Kool M
and
the CTXP core is powdered iron (material 52).
Although higher inductance reduces core loss, it increases
copper loss as it requires more windings. When space is not
a premium larger gauge wire can be used to reduce the wire
resistance. This also prevents excessive heat dissipation.
CIN
In continuous mode the source current of the P-channel
MOSFET is a square wave of duty cycle VOUT/VIN.Toprevent
large voltage transients, a low ESR input capacitor sized for
Figure 1. Efficiency Using Different Types of
Inductor Core Material
(Refer to Functional Diagram)
circuitry is shut off, reducing quiescent current from
0.45mA to 0.13mA. When the output capacitor discharges
by the amount of the hysteresis of the comparator A1, the
P-channel switch turns on again and the process repeats
itself.
Operating Frequency and Inductor
Since the LTC1174 utilizes a constant off-time architecture,
its operating frequency is dependent on the value of VIN. The
frequency of operation can be expressed as:
f
t
VV
Hz
OFF
IN
OUT
IN
D
=
+
()
1
where tOFF =4sandVDisthevoltagedropacrossthediode.
Note that the operating frequency is a function of the input
and ouput voltage.
Although the size of the inductor does not affect the fre-
quency, it does affect the ripple current. The peak-to-peak
ripple current is given by:
I
VV
L
A
RIPPLE
OUT
D
PP
=
+
()
410 6
By choosing a smaller inductor, a low ESR output filter
capacitor has to be used (see CIN and COUT). Moreover, core
loss will also increase (see Inductor Core Selection section)
due to higher ripple current.
OPERATIO
U
APPLICATIO S I FOR ATIO
WU
UU
LOAD CURRENT (mA)
1
EFFICIENCY
(%)
10
100
500
100
90
80
70
60
50
VIN = 5V
VOUT = 3.3V
IPGM = VIN
CTX50-4
CTX50-4P
1174 F01
LOAD CURRENT (mA)
1
EFFICIENCY
(%)
10
100
500
100
90
80
70
60
50
VIN = 5V
VOUT = 3.3V
IPGM = VIN
CTX100-4
CTX100-4P
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1436CGN | 2 A SWITCHING CONTROLLER, 400 kHz SWITCHING FREQ-MAX, PDSO24 |
| LTC1436IGN | 2 A SWITCHING CONTROLLER, 400 kHz SWITCHING FREQ-MAX, PDSO24 |
| LTC1551CS8 | SWITCHED CAPACITOR REGULATOR, PDSO8 |
| LTC1429CS8 | SWITCHED CAPACITOR REGULATOR, PDSO8 |
| LTC1550CS8 | SWITCHED CAPACITOR REGULATOR, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1174HVCN8 | 功能描述:IC REG BUCK INV ADJ 1A 8DIP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC1174HVCN8#PBF | 功能描述:IC REG BUCK INV ADJ 1A 8DIP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC1174HVCN8-3.3 | 功能描述:IC REG BUCK INV 3.3V 1A 8DIP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC1174HVCN8-3.3#PBF | 功能描述:IC REG BUCK INV 3.3V 1A 8DIP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC1174HVCN8-5 | 功能描述:IC REG BUCK INV 5V 1A 8DIP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
发布紧急采购，3分钟左右您将得到回复。