- 您现在的位置：买卖IC网 > PDF目录8657 > LTC1448IS8#TR (Linear Technology)IC DAC 12BIT DUAL R-R MPWR 8SOIC PDF资料下载
参数资料
| 型号： | LTC1448IS8#TR |
| 厂商： | Linear Technology |
| 文件页数： | 9/12页 |
| 文件大小： | 0K |
| 描述： | IC DAC 12BIT DUAL R-R MPWR 8SOIC |
| 标准包装： | 2,500 |
| 设置时间： | 14µs |
| 位数： | 12 |
| 数据接口： | 串行 |
| 转换器数目： | 2 |
| 电压电源： | 单电源 |
| 功率耗散（最大）： | 2.5mW |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 带卷 (TR) |
| 输出数目和类型： | 2 电压，单极 |
| 采样率（每秒）： | * |
6
LTC1448
DEFI ITIO S
UU
OPERATIO
U
Differential Nonlinearity (DNL): The differerence
between the measured change and the ideal 1LSB change
for any two adjacent codes. The DNL error between any
two codes is calculated as follows:
DNL = (
VOUT – LSB)/LSB
where
VOUT is the measured voltage difference between
two adjacent codes.
Digital Feedthrough: The glitch that appears at the analog
output caused by AC coupling from the digital inputs when
they change state. The area of the glitch is specified in
(nV)(sec).
Full-Scale Error (FSE): The deviation of the actual full-
scale voltage from ideal. FSE includes the effects of offset
and gain errors (see Applications Information).
Integral Nonlinearity (INL): The deviation from a straight
line passing through the endpoints of the DAC transfer
curve (Endpoint INL). Because the output cannot go below
zero, the linearity is measured between full scale and the
lowest code which guarantees the output will be greater
while pulling to within 300mV of the positive supply
voltage or ground. The output swings to within a few
millivolts of either supply rail when unloaded and has an
equivalent output resistance of 30
when driving a load to
the rails. The output can drive 1000pF without going into
oscillation.
The output swings from 0V to the voltage at the REF pin,
i.e., there is a gain of 1 from the REF to VOUT. Please note
if REF is tied to VCC the output can only swing to
(VCC – VOS). See Applications Information.
than zero. The INL error at a given input code is calculated
as follows:
INL = [VOUT – VOS – (VFS – VOS)(code/4095)]/LSB
where VOUT is the output voltage of the DAC measured at
the given input code.
Least Significant Bit (LSB): The ideal voltage difference
between two successive codes.
LSB = VREF/4096
Resolution (n): Defines the number of DAC output states
(2n) that divide the full-scale range. Resolution does not
imply linearity.
Voltage Offset Error (VOS): Nominally, the voltage at the
output when the DAC is loaded with all zeros. A single
supply DAC can have a true negative offset, but the output
cannot go below zero (see Applications Information).
For this reason, single supply DAC offset is measured at
the lowest code that guarantees the output will be greater
than zero.
Serial Interface
The data on the DIN input is loaded into the shift register
on the rising edge of the clock. Data is loaded as one 24-
bit word where the first 12 bits are for DAC A and the
second 12 are for DAC B. For each 12-bit segment the MSB
is loaded first. Data from the shift register is loaded into the
DAC register when CS/LD is pulled high. The clock is
disabled internally when CS/LD is high. Note: CLK must be
low before CS/LD is pulled low to avoid an extra internal
clock pulse.
Voltage Output
The LTC1448’s rail-to-rail buffered outputs can source or
sink 5mA over the entire operating temperature range
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1588IG#TRPBF | IC DAC SOFTSPAN 12BIT 16-SSOP |
| CD4071BM | IC 2-INPUT OR GATE 14-SOIC |
| LTC1588IG#TR | IC DAC SOFTSPAN 12BIT 5V 16-SSOP |
| AD5541AACPZ-REEL7 | IC DAC 16BIT SERIAL IN 10MSOP |
| IDT49FCT3805BQ | IC CLK BUFFER 1:5 166MHZ 20-QSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1450CG | 功能描述:IC D/A CONV 12BIT R-R PAR 24SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:47 系列:- 设置时间:2µs 位数:14 数据接口:并联 转换器数目:1 电压电源:单电源 功率耗散（最大）:55µW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:28-SSOP（0.209"，5.30mm 宽） 供应商设备封装:28-SSOP 包装:管件 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:* |
| LTC1450CG#PBF | 功能描述:IC D/A CONV 12BIT R-R PAR 24SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 设置时间:4µs 位数:12 数据接口:串行 转换器数目:2 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-uMAX 包装:管件 输出数目和类型:2 电压，单极 采样率（每秒）:* 产品目录页面:1398 (CN2011-ZH PDF) |
| LTC1450CG#TR | 功能描述:IC DAC 12BIT R-R PAR MPWR 24SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:47 系列:- 设置时间:2µs 位数:14 数据接口:并联 转换器数目:1 电压电源:单电源 功率耗散（最大）:55µW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:28-SSOP（0.209"，5.30mm 宽） 供应商设备封装:28-SSOP 包装:管件 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:* |
| LTC1450CG#TRPBF | 功能描述:IC D/A CONV 12BIT R-R PAR 24SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:47 系列:- 设置时间:2µs 位数:14 数据接口:并联 转换器数目:1 电压电源:单电源 功率耗散（最大）:55µW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:28-SSOP（0.209"，5.30mm 宽） 供应商设备封装:28-SSOP 包装:管件 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:* |
| LTC1450CGPBF | 制造商:Linear Technology 功能描述:DAC Parallel 12-Bit RRO uPower SSOP24 |
发布紧急采购，3分钟左右您将得到回复。