- 您现在的位置：买卖IC网 > PDF目录10809 > LTC1484CS8#PBF (Linear Technology)IC TXRX RS485 LOWPWR 8-SOIC PDF资料下载
参数资料
| 型号： | LTC1484CS8#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 3/16页 |
| 文件大小： | 0K |
| 描述： | IC TXRX RS485 LOWPWR 8-SOIC |
| 标准包装： | 100 |
| 类型： | 收发器 |
| 驱动器/接收器数： | 1/1 |
| 规程： | RS422，RS485 |
| 电源电压： | 4.75 V ~ 5.25 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 管件 |
| 产品目录页面： | 1354 (CN2011-ZH PDF) |
11
LTC1484
APPLICATIONS INFORMATION
WU
U
SWITCHI G TI E WAVEFOR S
UW
W
1.5V
NOTE: DI = 0, RE = 0, A AND B ARE THREE-STATED WHEN DE = 0
tDZR
OUTPUT NORMALLY LOW
OUTPUT NORMALLY HIGH
3V
0V
DE
V(A) – V(B)
RO
1484 F10
f = 1MHz, tr ≤ 10ns, tf ≤ 10ns
Figure 10. Driver Enable to Receiver Valid Timing
Low Power Operation
The LTC1484 has a quiescent current of 900
A max when
the driver is enabled. With the driver in three-state, the
supply current drops to 700
A max. The difference in
these supply currents is due to the additional current
drawn by the internal 22k receiver input resistors when the
driver is enabled. Under normal operating conditions, the
additional current is overshadowed by the 50mA current
drawn by the external termination resistor.
Receiver Open-Circuit Fail-Safe
Some encoding schemes require that the output of the
receiver maintain a known state (usually a logic 1) when
data transmission ends and all drivers on the line are
forced into three-state. Earlier RS485 receivers with a
weak pull-up at the A input will give a high output only
when the inputs are floated. When terminated or shorted
together, the weak pull-up is easily defeated causing the
receiver output to go low. External components are needed
if a high receiver output is mandatory. The receiver of the
LTC1484 has a fail-safe feature which guarantees the
output to be in a logic 1 when the receiver inputs are left
open or shorted together, regardless of whether the termi-
nation resistor is present or not.
In encoding schemes where the required known state is a
low, external components are needed for the LTC1484 and
other RS485 parts.
Fail-safe is achieved by making the receiver trip points fall
within the VTH(MIN) to VTH(MAX) range. When any of the
listed receiver input conditions exist, the receiver inputs
are effectively at 0V and the receiver output goes high.
The receiver fail-safe mechanism is designed to reject fast
common mode steps (– 7V to 12V in 10ns) switching at
100kHz typ. This is achieved through an internal carrier
detect circuit similar to the LTC1482. This circuit has built-
in delays to prevent glitches while the input swings be-
tween
±VTH(MAX) levels. When all the drivers connected to
the receiver inputs are three-stated, the internal carrier
detect signal goes low to indicate that no differential signal
is present. When any driver is taken out of three-state, the
carrier detect signal takes 1.6
styp(seetDZR)todetectthe
enabled driver. During this interval, the transceiver output
(RO) is forced to the fail-safe high state. After 1.6
s, the
receiver will respond normally to changes in driver output.
If the part is taken out of shutdown mode with the receiver
inputs floating, the receiver output takes about 10
s to
leave three-state (see tZL(SHDN)). If the receiver inputs are
actively driven to a high state, the outputs go high after
about 5.5
s.
相关PDF资料 |
PDF描述 |
|---|---|
| VE-BN1-MW | CONVERTER MOD DC/DC 12V 100W |
| LTC2855CGN#PBF | IC TXRX RS485/RS422 16-SSOP |
| LTC2850IDD#PBF | IC TXRX RS485 20MBPS 8-DFN |
| VE-BN0-MW | CONVERTER MOD DC/DC 5V 100W |
| LTC2856IMS8-1#PBF | IC TXRX RS485/RS422 8-MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1484IN8 | 功能描述:IC TXRX RS485 LOWPWR 8-DIP RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422，RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:管件 |
| LTC1484IN8#PBF | 功能描述:IC TXRX RS485 LOWPWR 8-DIP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422，RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:管件 |
| LTC1484IS8 | 功能描述:IC TXRX RS485 LOWPWR 8-SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422，RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:管件 |
| LTC1484IS8#PBF | 功能描述:IC TXRX RS485 LOWPWR 8-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422，RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:管件 |
| LTC1484IS8#TR | 功能描述:IC TXRX RS485 LP FAILSAFE 8SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:27 系列:- 类型:收发器 驱动器/接收器数:3/3 规程:RS232，RS485 电源电压:4.75 V ~ 5.25 V 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。