参数资料
型号: LTC1484CS8
厂商: Linear Technology
文件页数: 6/16页
文件大小: 0K
描述: IC TXRX RS485 LOWPWR 8-SOIC
标准包装: 100
类型: 收发器
驱动器/接收器数: 1/1
规程: RS422,RS485
电源电压: 4.75 V ~ 5.25 V
安装类型: 表面贴装
封装/外壳: 8-SOIC(0.154",3.90mm 宽)
供应商设备封装: 8-SOIC
包装: 管件
14
LTC1484
longer delay for the falling edge is due to the larger voltage
range the line must swing (typically > 2V compared to
370mV) before the receiver trips high again. The differ-
ence in delay affects the duty cycle of the received data and
depends on cable capacitance. For a 1-foot STP cable, the
delays drop to 0.13
s and 0.4s. Using smaller valued
pull-up and pull-down resistors to equalize the positive
and negative voltage swings needed to trip the receivers
will reduce the difference in delay and increase the maxi-
mum data rate. With 220
resistors, both rising and
falling edge delays are 2.2
swhendrivinga1000-footSTP
cable as shown in Figure 12b.
The fail-safe feature of the LTC1484 receiver allows a
CDMA system to function without the A and B pull-up and
pull-down resistors. However, if the resistors are left out,
noise margin will be reduced to as low as 15mV and
propagation delays will increase significantly. Operation in
this mode is not recommended.
Since DE and RE are tied together, the part never shuts
down. The receiver inputs are never floating (due to the
external bias resistors) so that the tDZR timing does not
apply to this application. The whole system can be changed
to actively transmit only a “1” by swapping the pull-up and
pull-down resistors in Figure 11, shorting DI to VCC and
connecting the 1k resistor as a pull-down. In this configu-
ration the driver is noninverting and the receiver output RO
truly follows DE.
APPLICATIONS INFORMATION
WU
U
PACKAGE DESCRIPTION
U
Dimensions in inches (millimeters), unless otherwise noted.
MS8 Package
8-Lead Plastic MSOP
(LTC DWG # 05-08-1660)
MSOP (MS8) 1098
* DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH,
PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
** DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
0.021
± 0.006
(0.53
± 0.015)
0
° – 6° TYP
SEATING
PLANE
0.007
(0.18)
0.040
± 0.006
(1.02
± 0.15)
0.012
(0.30)
REF
0.006
± 0.004
(0.15
± 0.102)
0.034
± 0.004
(0.86
± 0.102)
0.0256
(0.65)
BSC
12
3
4
0.193
± 0.006
(4.90
± 0.15)
8
7 6
5
0.118
± 0.004*
(3.00
± 0.102)
0.118
± 0.004**
(3.00
± 0.102)
相关PDF资料
PDF描述
IDT7204L35J IC FIFO 4KX9 35NS 32PLCC
MS27466E23B55P CONN RCPT 55POS WALL MT W/PINS
VE-B7Y-MX CONVERTER MOD DC/DC 3.3V 49.5W
IDT7204L50J IC FIFO 4KX9 50NS 32PLCC
CS5381-KZZR IC ADC AUD 120DB 192KHZ 24-TSSOP
相关代理商/技术参数
参数描述
LTC1484CS8#PBF 功能描述:IC TXRX RS485 LOWPWR 8-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 产品培训模块:RS-232 & USB Transceiver 标准包装:2,000 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-SSOP(0.209",5.30mm 宽) 供应商设备封装:16-SSOP 包装:带卷 (TR) 其它名称:296-19849-2
LTC1484CS8#PBF 制造商:Linear Technology 功能描述:RS485 Transceiver IC
LTC1484CS8#TR 功能描述:IC TXRX RS485 LP FAILSAFE 8SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422,RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN(3x3) 包装:管件
LTC1484CS8#TRPBF 功能描述:IC TXRX RS485 LOWPWR 8-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422,RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN(3x3) 包装:管件
LTC1484CS8PBF 制造商:Linear Technology 功能描述:RS-485 Driver/Receiver Fail-Safe SOIC8