- 您现在的位置：买卖IC网 > PDF目录1934 > LTC1485IS8#TRPBF (Linear Technology)IC TXRX DIFFERNTIAL BUS 8-SOIC PDF资料下载
参数资料
| 型号： | LTC1485IS8#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 12/12页 |
| 文件大小： | 0K |
| 描述： | IC TXRX DIFFERNTIAL BUS 8-SOIC |
| 标准包装： | 2,500 |
| 类型： | 收发器 |
| 驱动器/接收器数： | 1/1 |
| 规程： | RS422，RS485 |
| 电源电压： | 4.75 V ~ 5.25 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 带卷 (TR) |
9
LTC1485
U
S
A
O
PPLICATI
WU
U
I FOR ATIO
Figure 12. Termination Effects
1485 F12
DX
DRIVER
RECEIVER
RX
PROBE HERE
Rt = 120
Rt = 47
Rt = 470
Rt
AC Cable Termination
Cable termination resistors are necessary to prevent un-
wanted reflections, but they consume power. The typical
differential output voltage of the driver is 2V when the
cable is terminated with two 120
resistors, causing
33mA of DC current to flow in the cable when no data is
being sent. This DC current is about 10 times greater than
the supply current of the LTC1485. One way to eliminate
the unwanted current is by AC-coupling the termination
resistors as shown in Figure 13.
Figure 13. AC-Coupled Termination
The coupling capacitor must allow high frequency energy
to flow to the termination, but block DC and low frequen-
cies. The dividing line between high and low frequency
depends on the length of the cable. The coupling capacitor
must pass frequencies above the point where the line
represents an electrical one-tenth wavelength. The value
of the coupling capacitor should therefore be set at 16.3pF
per foot of cable length for 120
cables. With the coupling
capacitors in place, power is consumed only on the signal
edges and not when the driver output is idling at a 1 or 0
state. A 100nF capacitor is adequate for lines up to 400 feet
in length. Be aware that the power savings start to de-
crease once the data rate surpasses 1/(120
C).
Receiver Open-Circuit Fail-Safe
Some data encoding schemes require that the output of
the receiver maintains a known state (usually a logic 1)
when the data is finished transmitting and all drivers on the
line are forced into three-state. The receiver of the LTC1485
has a fail-safe feature which guarantees the output to be in
a logic 1 state when the receiver inputs are left floating
(open-circuit).
If the receiver output must be forced to a known state, the
circuits of Figure 14 can be used.
Figure 14. Forcing “0” When All Drivers Are Off
1485 F14
110
RX
130
130
110
5V
RX
1.5k
120
5V
1.5k
RX
RECEIVER
120
5V
C
100k
RECEIVER
1485 F13
C = LINE LENGTH (FT) 16.3pF
120
C
RX
RECEIVER
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1487CS8#TRPBF | IC TXRX RS485 LOW EMI LOPWR8SOIC |
| LTC1520CS#TRPBF | IC LINE RCVR HI-SPD QUAD 16-SOIC |
| LTC1535ISW#TRPBF | IC TRANSCEIVER RS485 ISO 28SOIC |
| LTC1546IG#TRPBF | IC SW TRANSCEIVER W/TERM 28-SSOP |
| LTC1560-1IS8#TRPBF | IC FILTER ELLIPTIC LOWPASS 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1487CN8 | 功能描述:IC TXRX RS485 LOW EMI LOPWR 8DIP RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422，RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:管件 |
| LTC1487CN8#PBF | 功能描述:IC TXRX RS485 LOW EMI LOPWR 8DIP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422，RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:管件 |
| LTC1487CN8PBF | 制造商:Linear Technology 功能描述:LTC1487CN8PBF |
| LTC1487CS8 | 功能描述:IC TXRX RS485 LOW EMI LOPWR8SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422，RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:管件 |
| LTC1487CS8#PBF | 功能描述:IC TXRX RS485 LOW EMI LOPWR8SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 产品培训模块:RS-232 & USB Transceiver 标准包装:2,000 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-SSOP（0.209"，5.30mm 宽） 供应商设备封装:16-SSOP 包装:带卷 (TR) 其它名称:296-19849-2 |
发布紧急采购，3分钟左右您将得到回复。