- 您现在的位置：买卖IC网 > PDF目录383291 > LTC1544IG (LINEAR TECHNOLOGY CORP) Software-Selectable Multiprotocol Transceiver PDF资料下载
参数资料
| 型号： | LTC1544IG |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 通用总线功能 |
| 英文描述： | Software-Selectable Multiprotocol Transceiver |
| 中文描述： | QUAD LINE TRANSCEIVER, PDSO28 |
| 封装： | 0.209 INCH, PLASTIC, SSOP-28 |
| 文件页数： | 10/20页 |
| 文件大小： | 277K |
| 代理商： | LTC1544IG |
10
LTC1544
Cable Termination
Traditional implementations have included switching
resistors with expensive relays, or requiring the user to
change termination modules every time the interface
standard has changed. Custom cables have been used
with the termination in the cable head or separate termina-
tions are built on the board and a custom cable routes the
signals to the appropriate termination. Switching the
terminations with FETs is difficult because the FETs must
remain off even though the signal voltage is beyond the
supply voltage for the FET drivers or the power is off.
Using the LTC1344A along with the LTC1543/LTC1544
solves the cable termination switching problem. Via soft-
ware control, the LTC1344A provides termination for the
V.10 (RS423), V.11 (RS422), V.28 (RS232) and V.35
electrical protocols.
V.10 (RS423) Interface
A typical V.10 unbalanced interface is shown in Figure 11.
A V.10 single-ended generator output A with ground C is
connected to a differential receiver with inputs A
'
con-
nected to A, and input C
'
connected to the signal return
ground C. Usually, no cable termination is required for
V.10 interfaces, but the receiver inputs must be compliant
with the impedance curve shown in Figure 12.
The V.10 receiver configuration in the LTC1544 is shown
in Figure 13. In V.10 mode switch S3 inside the LTC1544
is turned off.The noninverting input is disconnected inside
the LTC1544 receiver and connected to ground. The cable
termination is then the 30k input impedance to ground of
the LTC1544 V.10 receiver.
I
Z
V
Z
–10V
–3.25mA
3.25mA
–3V
3V
10V
1544 F12
Figure 12. V.10 Receiver Input Impedance
Figure 11. Typical V.10 Interface
Figure 13. V.10 Receiver Configuration
A
A
'
C
C
'
GENERATOR
BALANCED
INTERCONNECTING
CABLE
LOAD
CABLE
TERMINATION
RECEIVER
1544 F11
R5
20k
LTC1544
RECEIVER
1544 F13
A
B
A
'
B
'
C
'
R8
6k
S3
R6
10k
R7
10k
GND
R4
20k
APPLICATIO
S I
FOR
ATIO
U
W
U
U
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1544 | Software-Selectable Multiprotocol Transceiver |
| LTC2400IS8 | 24-Bit uPower No Latency ADC in SO-8 |
| LTC2400 | 24-Bit uPower No Latency ADC in SO-8 |
| LTC2400C | 24-Bit uPower No Latency ADC in SO-8 |
| LTC2400CS8 | 24-Bit uPower No Latency ADC in SO-8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1544IG#PBF | 功能描述:IC TXRX SOFTWARE SELECTBL 28SSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| LTC1544IG#TR | 功能描述:IC TXRX SFTWR SEL DTE/DCE 28SSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| LTC1544IG#TRPBF | 功能描述:IC TXRX SOFTWARE SELECTBL 28SSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| LTC1544IGPBF | 制造商:Linear Technology 功能描述:RS-232/RS-449/RS-530 4T/4R SSOP28 |
| LTC1545CG | 功能描述:IC TXRX SOFTWARE SELECTBL 36SSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。