参数资料
| 型号： | LTC1545CG |
| 厂商： | Linear Technology |
| 文件页数： | 14/16页 |
| 文件大小： | 0K |
| 描述： | IC TXRX SOFTWARE SELECTBL 36SSOP |
| 标准包装： | 37 |
| 类型： | 收发器 |
| 驱动器/接收器数： | 5/5 |
| 电源电压： | 4.75 V ~ 5.25 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 36-SSOP（0.209"，5.30mm 宽） |
| 供应商设备封装： | 36-SSOP |
| 包装： | 管件 |
| 产品目录页面： | 1355 (CN2011-ZH PDF) |
7
LTC1545
SWITCHI G TI E WAVEFOR S
UW
W
Figure 6. V.11 Receiver Propagation Delays
APPLICATIONS INFORMATION
WU
U
Overview
The LTC1543/LTC1545 form the core of a complete soft-
ware-selectable DTE or DCE interface port that supports
the RS232, RS449, EIA530, EIA530-A, V.35, V.36 or X.21
protocols. Cable termination may be implemented using
the LTC1344A software-selectable cable termination chip
or by using existing discrete designs.
A complete DCE-to-DTE interface operating in EIA530
mode is shown in Figure 9. The LTC1543 of each port is
used to generate the clock and data signals. The LTC1545
is used to generate the control signals along with LL (Local
Loop-Back), RL (Remote Loop-Back), TM (Test Mode)
and RI (Ring Indicate). The LTC1344A cable termination
chip is used only for the clock and data signals because
they must support V.35 cable termination. The control
signals do not need any external resistors.
Mode Selection
The interface protocol is selected using the mode select
pins M0, M1 and M2 (see the Mode Selection table).
For example, if the port is configured as a V.35 interface,
the mode selection pins should be M2 = 1, M1 = 0, M0 = 0.
For the control signals, the drivers and receivers will
operate in V.28 (RS232) electrical mode. For the clock and
data signals, the drivers and receivers will operate in V.35
electrical mode. The DCE/DTE pin will configure the port
for DCE mode when high, and DTE when low.
The interface protocol may be selected simply by plugging
the appropriate interface cable into the connector. The
mode pins are routed to the connector and are left uncon-
nected (1) or wired to ground (0) in the cable as shown in
Figure 10.
VIH
VIL
1.5V
tPHL
VOH
VOL
A
R
tPLH
1545 F08
Figure 8. V.10, V.28 Receiver Propagation Delays
3V
0V
1.5V
0V
–3V
3V
1.5V
0V
3V
–3V
tPHL
tf
VO
–VO
D
A
tPLH
tr
1545 F07
Figure 7. V.10, V.28 Driver Propagation Delays
VOD2
–VOD2
0V
1.5V
0V
1.5V
tPLH
VOH
VOL
B – A
R
tPHL
1545 F06
f = 1MHz : tr ≤ 10ns : tf ≤ 10ns
INPUT
OUTPUT
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1590IS#TRPBF | IC D/A CONV 12BIT DUAL 16-SOIC |
| LTC1592AIG#TRPBF | IC D/A CONV 16BIT SOFTSPAN16SSOP |
| LTC1595AIN8 | IC D/A CONV 16BIT MULTPLYNG 8DIP |
| LTC1597AIN#PBF | IC CONV D/A 16BIT PAR 28-DIP |
| LTC1598CG | IC A/D CONV 12BIT SRL 8CH 24SSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1545CG#PBF | 功能描述:IC TXRX SOFTWARE SELECT 36-SSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| LTC1545CG#TR | 功能描述:IC TXRX SOFTWARE SELECTBL 36SSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| LTC1545CG#TRPBF | 功能描述:IC TXRX SOFTWARE SELECTBL 36SSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| LTC1545IG | 功能描述:IC TXRX SOFTWARE SELECTBL 36SSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| LTC1545IG#PBF | 功能描述:IC TXRX SOFTWARE SELECTBL 36SSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。