- 您现在的位置：买卖IC网 > PDF目录10231 > LTC1603CG#TRPBF (Linear Technology)IC ADC W/SHUTDOWN 16BIT 36-SSOP PDF资料下载
参数资料
| 型号： | LTC1603CG#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 20/20页 |
| 文件大小： | 0K |
| 描述： | IC ADC W/SHUTDOWN 16BIT 36-SSOP |
| 标准包装： | 2,000 |
| 位数： | 16 |
| 采样率（每秒）： | 250k |
| 数据接口： | 并联 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 350mW |
| 电压电源： | 模拟和数字，双 ± |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 36-SSOP（0.209"，5.30mm 宽） |
| 供应商设备封装： | 36-SSOP |
| 包装： | 管件 |
| 输入数目和类型： | 2 个单端，双极；1 个差分，双极 |
1603f
9
LTC1603
APPLICATIONS INFORMATION
WU
U
currents are shut down and only leakage current remains
(about 1
A). Wake-up time from Sleep mode is much
slower since the reference circuit must power up and
settle. Sleep mode wake-up time is dependent on the value
of the capacitor connected to the REFCOMP (Pin 4). The
wake-up time is 160ms with the recommended 47
F
capacitor.
Shutdown is controlled by Pin 33 (SHDN). The ADC is in
shutdown when SHDN is low. The shutdown mode is
selected with Pin 32 (CS). When SHDN is low, CS low
selects nap and CS high selects sleep.
Figure 2a. Nap Mode to Sleep Mode Timing
t4
SHDN
CONVST
1603 F02b
Figure 2b. SHDN to CONVST Wake-Up Timing
t2
t1
CS
CONVST
RD
1603 F03
Figure 3. CS to CONVST Setup Timing
0
CHANGE
IN
DNL
(LSB)
3500
4000
1603 F04
500
1000
2000
1500
2500
3000
4
3
2
1
0
CONVST LOW TIME, t5 (ns)
tCONV
tACQ
Figure 4. Change in DNL vs CONVST Low Time. Be Sure the
CONVST Pulse Returns High Early in the Conversion or After
the End of Conversion
Timing and Control
Conversion start and data read operations are controlled
by three digital inputs: CONVST, CS and RD. A falling edge
applied to the CONVST pin will start a conversion after the
ADC has been selected (i.e., CS is low). Once initiated, it
cannot be restarted until the conversion is complete.
Converter status is indicated by the BUSY output. BUSY is
low during a conversion.
We recommend using a narrow logic low or narrow logic
high CONVST pulse to start a conversion as shown in
Figures 5 and 6. A narrow low or high CONVST pulse
prevents the rising edge of the CONVST pulse from upset-
ting the critical bit decisions during the conversion time.
Figure 4 shows the change of the differential nonlinearity
error versus the low time of the CONVST pulse. As shown,
if CONVST returns high early in the conversion (e.g.,
CONVST low time <500ns), accuracy is unaffected. Simi-
larly, if CONVST returns high after the conversion is over
(e.g., CONVST low time >tCONV), accuracy is unaffected.
For best results, keep t5 less than 500ns or greater than
tCONV.
Figures 5 through 9 show several different modes of
operation. In modes 1a and 1b (Figures 5 and 6), CS and
RD are both tied low. The falling edge of CONVST starts the
conversion. The data outputs are always enabled and data
can be latched with the BUSY rising edge. Mode 1a shows
operation with a narrow logic low CONVST pulse. Mode 1b
shows a narrow logic high CONVST pulse.
In mode 2 (Figure 7) CS is tied low. The falling edge of
CONVST signal starts the conversion. Data outputs are in
t3
SHDN
CS
1603 F02a
相关PDF资料 |
PDF描述 |
|---|---|
| SP485RCN-L/TR | IC TXRX RS485 HALF DUPLEX 8NSOIC |
| LTC1603CG | IC ADC W/SHUTDOWN 16BIT 36-SSOP |
| MS27467T13A98SB | CONN PLUG 10POS STRAIGHT W/SCKT |
| VI-B3J-IV-S | CONVERTER MOD DC/DC 36V 150W |
| AD7715AR-5 | IC ADC 16BIT 5V 16-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1603IG | 功能描述:IC CONV A/D 16BIT 250KSPS 36SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| LTC1603IG#PBF | 功能描述:IC ADC W/SHUTDOWN 16BIT 36-SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| LTC1603IG#TR | 功能描述:IC CONV A/D 16BIT 250KSPS 36SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| LTC1603IG#TRPBF | 功能描述:IC ADC W/SHUTDOWN 16BIT 36-SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| LTC1604ACG | 功能描述:IC A/D CONV 16BIT SAMPLNG 36SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
发布紧急采购，3分钟左右您将得到回复。