- 您现在的位置：买卖IC网 > PDF目录19842 > LTC1647-3CGN#TR (Linear Technology)IC CTRLR HOTSWAP DUAL 16SSOP PDF资料下载
参数资料
| 型号： | LTC1647-3CGN#TR |
| 厂商： | Linear Technology |
| 文件页数： | 8/22页 |
| 文件大小： | 239K |
| 描述： | IC CTRLR HOTSWAP DUAL 16SSOP |
| 标准包装： | 2,500 |
| 类型： | 热交换控制器 |
| 应用： | 通用 |
| 内部开关： | 无 |
| 电源电压： | 2.7 V ~ 16.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SSOP（0.154"，3.90mm 宽） |
| 供应商设备封装： | 16-SSOP |
| 包装： | 带卷 (TR) |
LTC1647-1/
LTC1647-2/LTC1647-3
8
1647fa
PIN FUNCTIONS
V
CC1
(LTC1647-3): Channel 1 Positive Supply Input.
The supply range for normal operation is 2.7V to 16.5V .
The supply current, I
CC1
, is typically 1mA. Channel 1s
undervoltage lockout (UVLO) circuit disables GATE 1 until
the supply voltage at V
CC1
is greater than V
LKO
(typically
2.45V). GATE 1 is held at ground potential until UVLO
deactivates. If ON1 is high and V
CC1
is above the UVLO
threshold voltage, GATE 1 is pulled high by a 10糀 current
source. If V
CC1
falls below (V
LKO
V
LKH
), GATE 1 is pulled
immediately to ground. The internal reference and the
common charge pump are powered from the higher of
the two V
CC
inputs, V
CC1
or V
CC2
.
V
CC2
(LTC1647-3): Channel 2 Positive Supply Input. See
V
CC1
for functional description.
V
CC
: The Common Positive Supply Input for the LTC1647-1
and the LTC1647-2. V
CC1
and V
CC2
are internally connected
together.
GND: Chip Ground.
ON1: Channel 1 ON Input. The threshold at the ON1 pin is
set at 1.29V with 70mV hysteresis. If UVLO and the circuit
breaker of channel 1 are inactive, a logic high at ON1 enables
the 10糀 charge pump current source, pulling the GATE
1 pin above V
CC1
. If the ON1 pin is pulled low, the GATE 1
pin is pulled to ground by a 50糀 current sink.
ON1 resets channel 1s electronic circuit breaker by pulling
ON1 low for greater than one t
RESET
period (50約). A
low-to-high transition at ON1 restarts a normal GATE 1
pull-up sequence.
ON2: Channel 2 ON Input. See ON1 for functional
description.
FAULT1: Channel 1 Open-Drain Fault Status Output. FAULT1
pin pulls low after 0.3約 (t
FAULT
) if the circuit breaker
measures greater than 50mV across the sense resistor
connected between V
CC1
and SENSE 1. If FAULT1 pulls
low, GATE 1 also pulls low. FAULT1 remains low until ON1
is pulled low for at least one t
RESET
period.
FAULT2: Channel 2 Open-Drain Fault Status Output. See
FAULT 1 for functional description.
SENSE1: Channel 1 Circuit Breaker Current Sense Input.
Load current is monitored by a sense resistor connected
between V
CC1
and SENSE 1. The circuit breaker trips if the
voltage across the sense resistor exceeds 50mV (V
CB
). To
disable the circuit breaker, connect SENSE 1 to V
CC1
. In
order to obtain optimum performance, use Kelvin-sense
connections between the V
CC
and SENSE pins to the
current sense resistor.
SENSE2: Channel 2 Circuit Breaker Current Sense Input.
See SENSE 1 for functional description.
GATE1: Channel 1 N-channel MOSFET Gate Drive Output.
An internal charge pump guarantees at least 10V of gate
drive from a 5V supply. Two Zener clamps are incorporated
at the GATE 1 pin; one Zener clamps GATE 1 approximately
15V above V
CC
and the second Zener clamps GATE 1
appoximately 28V above GND. The rise time at GATE 1 is
set by an external capacitor connected between GATE 1
and GND and an internal 10糀 current source provided
by the charge pump. The fall time at GATE 1 is set by
the 50糀 current sink if ON1 is pulled low. If the circuit
breaker is tripped or the supply voltage hits the UVLO
threshold, a 50mA current sink rapidly pulls GATE 1 low.
An external 23V Zener from GATE1 to GND is required for
supply voltages (V
CC1
) greater than 10V.
GATE2: Channel 2 N-channel MOSFET Gate Drive Output.
See GATE 1 for functional description.
NC: No Connection.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-BN0-CY-B1 | CONVERTER MOD DC/DC 5V 50W |
| RW2-0509S/H2 | CONV DC/DC 2W 4.5-9VIN 09VOUT |
| VI-27P-CY-F1 | CONVERTER MOD DC/DC 13.8V 50W |
| RW2-0505S/H2 | CONV DC/DC 2W 4.5-9VIN 05VOUT |
| EMA06DTBI | CONN EDGECARD 12POS R/A .125 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1647-3IGN | 功能描述:IC CTRLR HOTSWAP DUAL 16SSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:100 系列:- 类型:热插拔开关 应用:通用 内部开关:是 电流限制:可调 电源电压:9 V ~ 13.2 V 工作温度:-40°C ~ 150°C 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-TDFN-EP（3x3） 包装:管件 |
| LTC1647-3IGN#PBF | 功能描述:IC CTRLR HOTSWAP DUAL 16SSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:100 系列:- 类型:热插拔开关 应用:通用 内部开关:是 电流限制:可调 电源电压:9 V ~ 13.2 V 工作温度:-40°C ~ 150°C 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-TDFN-EP（3x3） 包装:管件 |
| LTC1647-3IGN#TR | 功能描述:IC CTRLR HOTSWAP DUAL 16SSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:100 系列:- 类型:热插拔开关 应用:通用 内部开关:是 电流限制:可调 电源电压:9 V ~ 13.2 V 工作温度:-40°C ~ 150°C 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-TDFN-EP（3x3） 包装:管件 |
| LTC1647-3IGN#TRPBF | 功能描述:IC CTRLR HOTSWAP DUAL 16SSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:100 系列:- 类型:热插拔开关 应用:通用 内部开关:是 电流限制:可调 电源电压:9 V ~ 13.2 V 工作温度:-40°C ~ 150°C 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-TDFN-EP（3x3） 包装:管件 |
| LTC1649CS | 功能描述:IC REG CTRLR BUCK PWM VM 16-SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:- 标准包装:4,500 系列:PowerWise® PWM 型:控制器 输出数:1 频率 - 最大:1MHz 占空比:95% 电源电压:2.8 V ~ 5.5 V 降压:是 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:无 工作温度:-40°C ~ 125°C 封装/外壳:6-WDFN 裸露焊盘 包装:带卷 (TR) 配用:LM1771EVAL-ND - BOARD EVALUATION LM1771 其它名称:LM1771SSDX |
发布紧急采购，3分钟左右您将得到回复。