- 您现在的位置：买卖IC网 > PDF目录44988 > LTC1728HS5-5 (LINEAR TECHNOLOGY CORP) 3-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5 PDF资料下载
参数资料
| 型号： | LTC1728HS5-5 |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 电源管理 |
| 英文描述： | 3-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5 |
| 封装： | PLASTIC, SOT-23, 5 PIN |
| 文件页数： | 2/16页 |
| 文件大小： | 197K |
| 代理商： | LTC1728HS5-5 |
10
LTC1727/LTC1728
17278fb
Power-Down
On power-down, once any of the VCC inputs drop below
its threshold, RST is held at a logic low. A logic low of 0.3V
is guaranteed until both VCC3 and VCC5/VCC25/VCC18 drop
below 1V.
Glitch Immunity
The RST output of the LTC1727/LTC1728 have two forms
of glitch immunity built in. First, the input monitors require
the input voltage to transition at least 10% of the input
threshold (0.1 VRTH) below the input threshold for
approximately 50
s in order to force the monitor output
low. The duration of the transition must be longer for
voltage transitions of lesser magnitude (see Figure 1).
Secondly, the reset pulse width of approximately 200ms
acts to debounce the RST output ensuring that the RST
output will always be in the correct state.
The individual monitor outputs of the LTC1727 do not
have hysteresis and will track the monitor inputs relative
to the monitor’s input threshold (VRTA, VRT25, VRT3 and
VRT5). A very slow moving input voltage with ripple riding
on it may cause the individual monitor outputs (COMPA,
COMP25, COMP3 and COMP5) to toggle on the ripple as
the input voltage passes the input threshold. The slow
response time of the LTC1727’s input monitors has a
tendency to integrate signals on the inputs improving their
immunity to noise and ripple.
APPLICATIO S I FOR ATIO
WU
U
Supply Monitoring
The LTC1727 is a low power, high accuracy triple supply
monitoring circuit with three monitor outputs and a
200ms microprocessor reset output.
The LTC1728 is a low power, high accuracy triple supply
monitoring circuit with a single 200ms microprocessor
reset output.
All three VCC inputs must be above predetermined thresh-
olds for reset not to be invoked. The LTC1727/LTC1728
will assert reset during power-up, power-down and brown-
out conditions on any one or all of the VCC inputs.
Power Detect
The LTC1727/LTC1728 are powered from the 3.3V/3V
input pin (VCC3), the 1.8V input pin (VCC18), the 2.5V
input pin (VCC25) or the 5V input pin (VCC5), whichever
pin has the highest potential. This ensures the part pulls
the RST pin low as soon as either input pin is
≥1V.
Power-Up
Upon power-up, either the VCC5/VCC25/VCC18 or VCC3 pin,
can power the part. This ensures that RST will be low when
either VCC5/VCC25/VCC18 or VCC3 reaches 1V. As long as
any one of the VCC inputs is below its predetermined
threshold, RST will stay a logic low. Once all of the VCC
inputs rise above their thresholds, an internal timer is
started and RST is released after 200ms.
RST is reasserted whenever any one of the VCC inputs
drops below its predetermined threshold and remains
asserted until 200ms after all of the VCC inputs are above
their thresholds.
On the LTC1727, each of the comparator outputs will be
low until the VCC input that is monitored by that compara-
tor rises above the appropriate predetermined threshold.
The COMP3, and COMP5/COMP25 outputs are guaran-
teed to be in the correct logic state for either VCC3 or
VCC5/VCC25 greater than 1V. The COMPA output requires
the internal bandgap reference to be valid before the
correct logic state can be output. Therefore, the COMPA
output will be held low until VCCA is above 1V and VCC3 or
VCC5/VCC25 is greater than 2V (typ).
RESET MONITOR OVERDRIVE VOLTAGE (% OF VCC)
0.1
250
TRANSIENT
DURATION
(
s)
300
350
400
450
1
10
100
1727/28 F01
200
150
50
0
100
Figure 1. Transient Duration vs Comparator Overdrive
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1729CS8-8.4#TR | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 |
| LTC1772BIS6#PBF | 1 A SWITCHING CONTROLLER, 650 kHz SWITCHING FREQ-MAX, PDSO6 |
| LTC1871EMS#PBF-1 | SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, PDSO10 |
| LTC1871EMS#TR-1 | SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, PDSO10 |
| LTC1871IMS#TRPBF-1 | SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, PDSO10 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1728HS5-5#PBF | 制造商:Linear Technology 功能描述:MONITOR TRIPLE 4.675V ACT LW 5SOT23 制造商:Linear Technology 功能描述:MONITOR, TRIPLE, 4.675V, ACT LW, 5SOT23 制造商:Linear Technology 功能描述:MS-System Monitor/Supervisor, Cut Tape uP Precision Triple Supply Monitor |
| LTC1728HS5-5#TRMPBF | 功能描述:IC MON TRPL MCRPWR TSOT23-5 RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 标准包装:400 系列:- 类型:备用电池电路 监视电压数目:1 输出:开路漏极，推挽式 复位:高有效/低有效 复位超时:最小为 35 ms 电压 - 阀值:4.65V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:带卷 (TR) 其它名称:ADM691ARZ-REEL7TR |
| LTC1728HS5-5#TRPBF | 功能描述:IC MON TRPL MCRPWR TSOT23-5 RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 标准包装:400 系列:- 类型:备用电池电路 监视电压数目:1 输出:开路漏极，推挽式 复位:高有效/低有效 复位超时:最小为 35 ms 电压 - 阀值:4.65V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:带卷 (TR) 其它名称:ADM691ARZ-REEL7TR |
| LTC1729CMS8-4.1 | 功能描述:IC CTRLR BATT CHRGR LI-ION 8MSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN（6x3）裸露焊盘 包装:管件 |
| LTC1729CMS8-4.1#PBF | 功能描述:IC CTRLR BATT CHRGR LI-ION 8MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:1 系列:- 功能:充电管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:3.75 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:剪切带 (CT) 产品目录页面:669 (CN2011-ZH PDF) 其它名称:MCP73831T-2ACI/OTCT |
发布紧急采购，3分钟左右您将得到回复。