- 您现在的位置：买卖IC网 > PDF目录11772 > LTC1755EGN (Linear Technology)IC SMART CARD INTERFACE 24SSOP PDF资料下载
参数资料
| 型号： | LTC1755EGN |
| 厂商： | Linear Technology |
| 文件页数： | 16/16页 |
| 文件大小： | 0K |
| 描述： | IC SMART CARD INTERFACE 24SSOP |
| 标准包装： | 55 |
| 应用： | 智能卡 |
| 电源电压： | 2.7 V ~ 6 V |
| 封装/外壳： | 24-SSOP（0.154"，3.90mm 宽） |
| 供应商设备封装： | 24-SSOP |
| 包装： | 管件 |
| 安装类型： | 表面贴装 |
9
LTC1755/LTC1756
The READY pin is configured as an open-drain pull-down
with a weak pull-up current source. This permits wired-
OR connections of multiple LTC1755/LTC1756s to a
single microcontroller.
ALARM (Pin 22, LTC1755 Only): (Output) A low on this
pin indicates that a fault has occurred and that the LTC1755
is in the Alarm state (see the State Diagram). Possible
faults include VCC underrange for at least 5s, overtem-
perature shutdown, CLK or RST invalid output levels, and
card removal during the Active state.
CLK or RST invalid and overtemperature faults are de-
tected only after VCC has reached its final value (as
indicated by the READY pin). VCC underrange and card
removal during Active faults are detected at any time
during the Active period (i.e., once PWR = 0V).
The ALARM pin is configured as an open-drain pull-down
with a weak pull-up current source. This permits wired-
OR connections of multiple LTC1755s to a single micro-
controller.
UU
U
PI FU CTIO S LTC1755/LTC1756
CARD (Pin 23/15): (Output) Level-Shifted and Debounced
PRES Signal from the Smart Card Acceptor Switch. When
a valid card indication appears, this pin communicates the
presence of the Smart Card to the microcontroller. The
CARD pin has an open-drain active pull-down with a weak
pull-up current source for logic-OR connections. The
debounce circuit ensures that a card has been present for
a continuous period of at least 40ms before asserting
CARD low. The CARD pin returns high within 50
s of card
removal. The PRES pin, in conjunction with the NC/NO pin,
determines if a card is present.
5V/3V (Pin 24/16): (Input) Controls the output voltage
(VCC) of the DC/DC converter during the Active state. A
valid high sets VCC to 5V. A valid low sets VCC to 3V. The
5V/3V pin is latched on the falling edge of the PWR pin.
When PWR is low, changes on the 5V/3V pin are ignored.
To change the voltage on VCC the LTC1755/LTC1756 must
first be returned to the Idle state by bringing the PWR pin
high.
DVCC sets the logic reference level for the 5V/3V pin.
相关PDF资料 |
PDF描述 |
|---|---|
| AD8170ARZ-RL | IC MUX SWITCHING W/AMP 2:1 8SOIC |
| PIC16LF722A-I/SP | MCU PIC 3.5K FLASH XLP 28-SPDIP |
| D38999/20FD5SB | CONN RCPT 5POS WALL MNT W/SCKT |
| V150B5H150BG3 | CONVERTER MOD DC/DC 5V 150W |
| D38999/20WD5SC | CONN RCPT 5POS WALL MNT W/SCKT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1755EGN#PBF | 功能描述:IC SMART CARD INTERFACE 24SSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 专用 系列:- 特色产品:NXP - I2C Interface 标准包装:1 系列:- 应用:2 通道 I²C 多路复用器 接口:I²C，SM 总线 电源电压:2.3 V ~ 5.5 V 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:剪切带 (CT) 安装类型:表面贴装 产品目录页面:825 (CN2011-ZH PDF) 其它名称:568-1854-1 |
| LTC1755EGN#TR | 功能描述:IC SMART CARD INTERFACE 24SSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 专用 系列:- 特色产品:NXP - I2C Interface 标准包装:1 系列:- 应用:2 通道 I²C 多路复用器 接口:I²C，SM 总线 电源电压:2.3 V ~ 5.5 V 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:剪切带 (CT) 安装类型:表面贴装 产品目录页面:825 (CN2011-ZH PDF) 其它名称:568-1854-1 |
| LTC1755EGN#TRPBF | 功能描述:IC SMART CARD INTERFACE 24SSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 专用 系列:- 特色产品:NXP - I2C Interface 标准包装:1 系列:- 应用:2 通道 I²C 多路复用器 接口:I²C，SM 总线 电源电压:2.3 V ~ 5.5 V 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:剪切带 (CT) 安装类型:表面贴装 产品目录页面:825 (CN2011-ZH PDF) 其它名称:568-1854-1 |
| LTC1755EGNPBF | 制造商:Linear Technology 功能描述:Smart Card Interface LTC1755EGN |
| LTC1755ENG#PBF | 制造商:LT 功能描述: |
发布紧急采购，3分钟左右您将得到回复。