- 您现在的位置：买卖IC网 > PDF目录10293 > LTC1852CFW (Linear Technology)IC A/D CONV 8CH 10BIT 48-TSSOP PDF资料下载
参数资料
| 型号： | LTC1852CFW |
| 厂商： | Linear Technology |
| 文件页数： | 8/24页 |
| 文件大小： | 0K |
| 描述： | IC A/D CONV 8CH 10BIT 48-TSSOP |
| 标准包装： | 39 |
| 位数： | 10 |
| 采样率（每秒）： | 400k |
| 数据接口： | 并联 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 15mW |
| 电压电源： | 单电源 |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 48-TFSOP（0.240"，6.10mm 宽） |
| 供应商设备封装： | 48-TSSOP |
| 包装： | 管件 |
| 输入数目和类型： | 8 个单端，单极；8 个单端，双极；4 个差分，单极；4 个差分，双极 |
LTC1852/LTC1853
16
18523fa
Power Shutdown
The LTC1852/LTC1853 provide two power shutdown
modes, Nap and Sleep, to save power during inactive
periods. The Nap mode reduces the power to 2.5mW and
leaves only the digital logic and reference powered up.
The wake-up time from Nap to active is 200ns. In Sleep
mode, all bias currents are shut down and only leakage
current remains—about 20μA. Wake-up time from sleep
mode is much slower since the reference circuit must
power-up and settle to 0.005% for full 12-bit accuracy
(0.02% for full 10-bit accuracy). Sleep mode wake-up time
is dependent on the value of the capacitor connected to
the REFCOMP (Pin 12). The wake-up time is 10ms with
the recommended 10μF capacitor.
Shutdown is controlled by Pin 47 (SHDN); the ADC is in
shutdown when it is low. The shutdown mode is selected
with Pin 46 (CS); low selects Nap (Figures 2 and 3).
Timing and Control
Conversion start and data read operations are controlled by
three digital inputs: CONVST, CS and RD (Figure 4). A logic
“0” applied to the CONVST pin will start a conversion after
the ADC has been selected (i.e., CS is low). Once initiated,
it cannot be restarted until the conversion is complete.
Converter status is indicated by the BUSY output. BUSY
is low during a conversion. If CONVST returns high at a
critical point during the conversion it can create small
errors. For the best results, ensure that CONVST returns
high either within 400ns after the start of the conversion
or after BUSY rises.
Figures 5 through 9 show several different modes
of operation. In modes 1a and 1b (Figures 5 and 6),
CS and RD are both tied low. The falling edge of
CONVST starts the conversion. The data outputs
are always enabled and data can be latched with the
BUSY rising edge.Mode 1a shows operation with a narrow
logic low CONVST pulse. Mode 1b shows a narrow logic
high CONVST pulse.
In mode 2 (Figure 7), CS is tied low. The falling edge of
CONVST signal again starts the conversion. Data out-
puts are in three-state until read by the MPU with the
RD signal. Mode 2 can be used for operation with a shared
MPU databus.
In slow memory and ROM modes (Figures 8 and 9),CS is
tied low and CONVST and RD are tied together. The MPU
starts the conversion and reads the output with the RD
signal. Conversions are started by the MPU or DSP (no
external sample clock).
In slow memory mode, the processor applies a logic low
to RD ( = CONVST), starting the conversion. BUSY goes
low, forcing the processor into a Wait state. The previous
conversion result appears on the data outputs. When
the conversion is complete, the new conversion results
Figure 4. CS to CONVST and RD Setup Timing
CS
CONVST
t2
t1
18523 F04
RD
CONVST
BUSY
t6
t7
DATA
DATA (N – 1)
DATA N
18523 F05
t5
tCONV
t8
Figure 5. Mode 1a CONVST Starts a Conversion. Data Outputs Always Enabled (CS = RD = 0)
APPLICATIONS INFORMATION
相关PDF资料 |
PDF描述 |
|---|---|
| TA5MX | CONN PLUG CORD MINI 5POS MALE |
| D38999/26MA98BA | CONN HSG PLUG 3POS STRGHT SCKT |
| VI-B6P-IW-B1 | CONVERTER MOD DC/DC 13.8V 100W |
| MS27467T11B99PB | CONN PLUG 7POS STRAIGHT W/PINS |
| LTC1852CFW#PBF | IC ADC 8CH 10BIT 400KSPS 48TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1852CFW#PBF | 功能描述:IC ADC 8CH 10BIT 400KSPS 48TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| LTC1852CFW#TR | 功能描述:IC A/D CONV 8CH 10BIT 48-TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| LTC1852CFW#TRPBF | 功能描述:IC A/D CONV 8CH 10BIT 48-TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| LTC1852IFW | 功能描述:IC A/D CONV 8CH 10BIT 48-TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| LTC1852IFW#PBF | 功能描述:IC A/D CONV 8CH 10BIT 48-TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
发布紧急采购，3分钟左右您将得到回复。