- 您现在的位置：买卖IC网 > PDF目录10548 > LTC2301CDE#PBF (Linear Technology)IC ADC 12BIT I2C 12-DFN PDF资料下载
参数资料
| 型号： | LTC2301CDE#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 4/26页 |
| 文件大小： | 0K |
| 描述： | IC ADC 12BIT I2C 12-DFN |
| 标准包装： | 91 |
| 位数： | 12 |
| 采样率（每秒）： | 14k |
| 数据接口： | I²C，串行 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 17.5mW |
| 电压电源： | 单电源 |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 12-WFDFN 裸露焊盘 |
| 供应商设备封装： | 12-DFN（4x3） |
| 包装： | 管件 |
| 输入数目和类型： | 2 个单端，单极；2 个单端，双极；1 个差分，单极；1 个差分，双极 |
| 配用： | DC1444A-A-ND - BOARD SAR ADC LTC2301 |
LTC2301/LTC2305
12
23015fb
APPLICATIONS INFORMATION
Overview
The LTC2301/LTC2305 are low noise, 1-/2-channel, 12-bit
successive approximation register (SAR) A/D converters
with an I2C compatible serial interface. The LTC2301/
LTC2305 both include a precision internal reference. The
LTC2305 includes a 2-channel analog input multiplexer
(MUX) while the LTC2301 includes an input MUX that allows
the polarity of the differential input to be selected. These
ADCs can operate in either unipolar or bipolar mode. Uni-
polar mode should be used for single-ended operation with
the LTC2305, since single-ended input signals are always
referenced to GND. A sleep mode option is also provided
to further reduce power during inactive periods.
The LTC2301/LTC2305 communicate through a 2-wire
I2C compatible serial interface. Conversions are initiated
by signaling a STOP condition after the part has been
successfully addressed for a read/write operation. The
device will not acknowledge an external request until the
conversion is nished. After a conversion is nished, the
device is ready to accept a read/write request. Once the
LTC2301/LTC2305 is addressed for a read operation, the
device begins outputting the conversion result under the
control of the serial clock (SCL). There is no latency in
the conversion result. There are 12 bits of output data fol-
lowed by four trailing zeros. Data is updated on the falling
edges of SCL, allowing the user to reliably latch data on
the rising edge of SCL. A write operation may follow the
read operation by using a repeat START or a STOP condi-
tion may be given to start a new conversion. By selecting
a write operation, these ADCs can be programmed by a
6-bit DIN word. The DIN word congures the MUX and
programs various modes of operation.
During a conversion, the internal 12-bit capacitive charge-
redistribution DAC output is sequenced through a succes-
sive approximation algorithm by the SAR starting from
the most signicant bit (MSB) to the least signicant bit
(LSB). The sampled input is successively compared with
binary weighted charges supplied by the capacitive DAC
using a differential comparator. At the end of a conver-
sion, the DAC output balances the analog input. The SAR
contents (a 12-bit data word) that represent the sampled
analog input are loaded into 12 output latches that allow
the data to be shifted out via the I2C interface.
Programming the LTC2301 and LTC2305
The software compatible LTC2301/LTC2305/LTC2309 fam-
ily features a 6-bit DIN word to program various modes of
operation. Don’t care bits (X) are ignored. The SDA data
bits are loaded on the rising edge of SCL during a write
operation, with the S/D bit loaded on the rst rising edge
and the SLP bit on the sixth rising edge (see Figure 7b
in the I2C Interface section). The input data word for the
LTC2305 is dened as follows:
S/D O/S
X
UNI SLP
S/D = SINGLE-ENDED/DIFFERENTIAL BIT
O/S = ODD/SIGN BIT
UNI = UNIPOLAR/BIPOLAR BIT
SLP = SLEEP MODE BIT
For the LTC2301, the input word is dened as:
X
O/S
X
UNI SLP
Analog Input Multiplexer
The analog input MUX is programmed by the S/D and
O/S bits of the DIN word for the LTC2305 and the O/S
bit of the DIN word for the LTC2301. Table 1 and Table 2
list the MUX congurations for all combinations of the
conguration bits. Figure 1a shows several possible MUX
congurations and Figure 1b shows how the MUX can be
recongured from one conversion to the next.
Table 1. Channel Conguration for the LTC2305
S/D
O/S
CH0
CH1
00
+
–
01
–
+
10
+
11
+
相关PDF资料 |
PDF描述 |
|---|---|
| VI-25P-IW-F4 | CONVERTER MOD DC/DC 13.8V 100W |
| VE-B4R-MX-F1 | CONVERTER MOD DC/DC 7.5V 75W |
| VE-B4R-MW | CONVERTER MOD DC/DC 7.5V 100W |
| TMK105CG181KW-F | CAP CER 180PF 25V 10% NP0 0402 |
| VE-B4P-MX-F4 | CONVERTER MOD DC/DC 13.8V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC2301CMS#PBF | 功能描述:IC ADC 12-BIT 1CHN 12-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2301CMS#TRPBF | 功能描述:IC ADC 12-BIT 1CHN 12-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2301HMS#PBF | 功能描述:IC ADC 12-BIT 1CHN 12-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2301HMS#TRPBF | 功能描述:IC ADC 12-BIT 1CHN 12-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2301IDE#PBF | 功能描述:IC ADC 12-BIT 1CHN 12-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
发布紧急采购，3分钟左右您将得到回复。