- 您现在的位置：买卖IC网 > PDF目录39417 > LTC2301IMS#PBF (LINEAR TECHNOLOGY CORP) 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO12 PDF资料下载
参数资料
| 型号： | LTC2301IMS#PBF |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | ADC |
| 英文描述： | 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO12 |
| 封装： | LEAD FREE, PLASTIC, MSOP-12 |
| 文件页数： | 10/26页 |
| 文件大小： | 881K |
| 代理商： | LTC2301IMS#PBF |
LTC2301/LTC2305
18
23015fb
APPLICATIONS INFORMATION
After power-up, the ADC initiates an internal reset cycle
which sets the DIN word to all 0s (S/D=O/S=UNI=SLP=0).
A write operation may be performed if the default state
of the ADC’s conguration is not desired. Otherwise, the
ADC must be properly addressed and followed by a STOP
condition to initiate a conversion.
Initiating a New Conversion
The LTC2301/LTC2305 awakens from either nap or sleep
when properly addressed for a read/write operation. A
STOP command may then be issued after performing the
read/write operation to trigger a new conversion.
Issuing a STOP command after the 8th SCL clock pulse of
the address frame and before the completion of a read/write
operation will also initiate new conversion, but the output
result may not be valid due to lack of adequate acquisition
time (see Acquisition section).
LTC2301/LTC2305 Address
The LTC2301/LTC2305 have two address pins (AD0 and
AD1) that may be tied high, low or left oating to enable
one of the 9 possible addresses (see Table 2).
In addition to the congurable addresses listed in Table 2,
the LTC2301/LTC2305 also contain a global address
(1101011) which may be used for synchronizing multiple
LTC2301/LTC2305s or other I2C LTC230X SAR ADCs (see
Synchronizing Multiple LTC2301/LTC2305s with Global
Address Call section).
Table 2. Address Assignment
AD1
AD0
ADDRESS
LOW
0001000
LOW
Float
0001001
LOW
HIGH
0001010
Float
HIGH
0001011
Float
0011000
Float
LOW
0011001
HIGH
LOW
0011010
HIGH
Float
0011011
HIGH
0101000
Continuous Read
In applications where the same input channel is sampled
each cycle, conversions can be continuously performed
and read without a write cycle (see Figure 8). The DIN word
remains unchanged from the last value written into the
device. If the device has not been written to since power-
up, the DIN word defaults to all 0s (S/D=O/S=UNI=SLP=0).
At the end of a read operation, a STOP condition may be
given to start a new conversion. At the conclusion of the
conversion cycle, the next result may be read using the
method described above. If the conversion cycle is not
concluded and a valid address selects the device, the
LTC2301/LTC2305 generates a NACK signal indicating the
conversion cycle is in progress.
Figure 8. Consecutive Reading with the Same Conguration
S
CONVERSION
NAP
DATA OUTPUT
CONVERSION
NAP
DATA
OUTPUT
R
ACK
READ
7-BIT ADDRESS
P
S
R
ACK
23015 F08
READ
7-BIT ADDRESS
P
相关PDF资料 |
PDF描述 |
|---|---|
| LTC2305CMS#TRPBF | 2-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO12 |
| LTC2301IMS#TRPBF | 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO12 |
| LTC2305CDE#TRPBF | 2-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO12 |
| LTC2301HMS#PBF | 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO12 |
| LTC2301IDE#TRPBF | 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO12 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC2302CDD#PBF | 功能描述:IC ADC 12BIT 1CH 500KSPS 10-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2302CDD#TRPBF | 功能描述:IC ADC 12-BIT 1CH 500KSPS 10DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2302IDD#PBF | 功能描述:IC ADC 12BIT 1CH 500KSPS 10-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2302IDD#TRPBF | 功能描述:IC ADC 12-BIT 1CH 500KSPS 10DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2305CDE#PBF | 功能描述:IC ADC 12-BIT 2CHN 12-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
发布紧急采购，3分钟左右您将得到回复。