- 您现在的位置：买卖IC网 > PDF目录10567 > LTC2366IS6#TRMPBF (Linear Technology)IC ADC 12BIT 3MSPS TSOT23-6 PDF资料下载
参数资料
| 型号： | LTC2366IS6#TRMPBF |
| 厂商： | Linear Technology |
| 文件页数： | 11/24页 |
| 文件大小： | 0K |
| 描述： | IC ADC 12BIT 3MSPS TSOT23-6 |
| 标准包装： | 1 |
| 位数： | 12 |
| 采样率（每秒）： | 3M |
| 数据接口： | MICROWIRE?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 14.4mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-6 细型，TSOT-23-6 |
| 供应商设备封装： | TSOT-23-6 |
| 包装： | 标准包装 |
| 输入数目和类型： | 1 个单端，单极 |
| 产品目录页面： | 1347 (CN2011-ZH PDF) |
| 其它名称： | LTC2366IS6#TRMPBFDKR |
LTC2365/LTC2366
19
23656fb
For more information www.linear.com/LTC2365
applications inForMation
Figure 18. RC Input Filter
Input Filtering and Source Impedance
Thenoiseandthedistortionoftheinputamplifierandother
circuitry must be considered since they will add to the
LTC2365/LTC2366 noise and distortion. The small-signal
bandwidth of the sample-and-hold circuit is 50MHz. Any
noise or distortion products that are present at the analog
inputs will be summed over this entire bandwidth. Noisy
input circuitry should be filtered prior to the analog inputs
to minimize noise. A simple 1-pole RC filter is sufficient for
many applications. For example, Figure 18 shows a 47pF
capacitor from AIN to ground and a 51 source resistor to
limittheinputbandwidthto47MHz.The47pFcapacitoralso
acts as a charge reservoir for the input sample-and-hold
and isolates the ADC input from sampling-glitch sensitive
circuitry. High quality capacitors and resistors should be
used since these components can add distortion. NPO
and silver mica type dielectric capacitors have excellent
linearity. Carbon surface mount resistors can generate
distortion from self heating and from damage that may
occurduringsoldering.Metalfilmsurfacemountresistors
are much less susceptible to both problems. When high
amplitude unwanted signals are close in frequency to the
desired signal frequency, a multiple pole filter is required.
Highexternalsourceresistance,combinedwiththe20pFof
input capacitance, will reduce the rated 50MHz bandwidth
and increase acquisition time beyond 56ns.
Reference Input
On the TS8 package of the LTC2365/LTC2366, the voltage
on the VREF pin defines the full-scale range of the ADC.
The reference voltage can range from VDD down to 1.4V.
Input Range
The analog input of the LTC2365/LTC2366 is driven
single-ended with respect to GND from a single supply.
The input may swing up to VDD for the S6 package and
to VREF for the TS8 package. The 0V to 2.5V range is also
ideally suited for single-ended input use with VDD or VREF
= 2.5V for single supply applications. If the difference
between the AIN input and GND exceeds VDD for the S6
package or VREF for the TS8 package, the output code will
stay fixed at all ones, and if this difference goes below 0V,
the output code will stay fixed at all zeros.
Figure 19 shows the ideal input/output characteristics for
the LTC2365/LTC2366. The code transitions occur mid-
way between successive integer LSB values (i.e. 0.5LSB,
1.5LSB, 2.5LSB, …, FS –1.5LSB). The output code is
straight binary with 1LSB = VDD/4096 for the S6 package
and 1LSB = VREF/4096 for the TS8 package.
VDD
GND
LTC2366
23656 F18
10F
47pF
51
6
5
4
1
2
3
CS
SD0
SCK
AIN
Figure 19. LTC2365/LTC2366 Transfer Characteristics
INPUT VOLTAGE (V)
UNIPOLAR
OUTPUT
CODE
23656 F19
111...111
111...110
000...000
000...001
FS – 1LSB
1LSB
0
相关PDF资料 |
PDF描述 |
|---|---|
| VI-J0H-MY-F3 | CONVERTER MOD DC/DC 52V 50W |
| VI-B50-MX-F3 | CONVERTER MOD DC/DC 5V 75W |
| 206037-1 | CONN PLUG CPC 16POS STD SER 1 |
| 97-3102A-20-4S | CONN RECEPT BOX MNT 4POS W/SOCK |
| 206137-2 | CONN CPC SER 3 RCPT 7POS SIZE 23 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC2366ITS8#PBF | 制造商:Linear Technology 功能描述:12BIT ADC 3MSPS SERIAL 8SOT23 制造商:Linear Technology 功能描述:IC, ADC, 12BIT, 3MSPS, TSOT-23-8, Resolution (Bits):12bit, Sampling Rate:3MSPS, Supply Voltage Type:Single, Supply Voltage Min:2.35V, Supply Voltage Max:3.6V, Supply Current:2.6mA, Digital IC Case Style:TSOT-23, No. of Pins:8 , RoHS Compliant: Yes 制造商:Linear Technology 功能描述:MS-ADC/General Purpose, Cut Tape 12-bit 2Msps SAR ADC in |
| LTC2366ITS8#TRMPBF | 功能描述:IC ADC 12BIT 3MSPS TSOT23-8 RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 其它有关文件:TSA1204 View All Specifications 标准包装:1 系列:- 位数:12 采样率（每秒）:20M 数据接口:并联 转换器数目:2 功率耗散（最大）:155mW 电压电源:模拟和数字 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-TQFP 供应商设备封装:48-TQFP（7x7） 包装:Digi-Reel® 输入数目和类型:4 个单端，单极；2 个差分，单极 产品目录页面:1156 (CN2011-ZH PDF) 其它名称:497-5435-6 |
| LTC2366ITS8#TRPBF | 功能描述:IC ADC 12BIT 3MSPS TSOT23-8 RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| LTC2367CDE-16#PBF | 功能描述:IC ADC 16BIT SPI/SRL 500K 16-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
| LTC2367CDE-16#TRPBF | 功能描述:IC ADC 16BIT SPI/SRL 500K 16-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
发布紧急采购，3分钟左右您将得到回复。