- 您现在的位置：买卖IC网 > PDF目录10160 > LTC2392CLX-16#PBF (Linear Technology)IC ADC 16BIT SER/PAR 500K 48LQFP PDF资料下载
参数资料
| 型号： | LTC2392CLX-16#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 8/26页 |
| 文件大小： | 0K |
| 描述： | IC ADC 16BIT SER/PAR 500K 48LQFP |
| 标准包装： | 250 |
| 位数： | 16 |
| 采样率（每秒）： | 500k |
| 数据接口： | 串行，并联 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 135mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 48-LQFP |
| 供应商设备封装： | 48-LQFP（7x7） |
| 包装： | 托盘 |
| 输入数目和类型： | 1 个差分，双极 |
| 配用： | DC1500A-B-ND - BOARD SAR ADC LTC2392-16 |
LTC2392-16
16
239216fa
applications inFormation
down. The data from that conversion can be read after PD
= low is applied. In this mode power consumption drops
to a typical value of 175W from 110mW. This mode can
be used if the LTC2392-16 is inactive for a long period of
timeandtheuserwantstominimizethepowerdissipation.
Recovery from Power Shutdown Mode
Once the PD pin is returned to a low level, ending the
power shutdown request, the internal circuitry will begin
to power up. If the internal reference is used, the 2.6kΩ
output impedance with the 1F bypass capacitor on the
REFIN/REFOUT pins will be the main time constant for
the power-on recovery time. If an external reference is
used, typically allow 5ms for recovery before initiating a
new conversion.
Power Dissipation vs Sampling Frequency
The power dissipation of the LTC2392-16 will decrease
as the sampling frequency is reduced when nap mode is
activated. See Figure 7. In nap mode, a portion of the cir-
cuitry on the LTC2392-16 is turned off after a conversion
has been completed. Increasing the time allowed between
conversions lowers the average power.
TIMING AND CONTROL
The LTC2392-16 conversion is controlled by CNVST. A
falling edge on CNVST will start a conversion. CS and RD
control the digital interface on the LTC2392-16. When
either CS or RD is high, the digital outputs are high
impedance.
CNVST Timing
The LTC2392-16 conversion is controlled by CNVST. A
falling edge on CNVST will start a conversion. Once a
conversion has been initiated, it cannot be restarted until
the conversion is complete. For optimum performance
CNVST should be a clean low jitter signal. Converter status
is indicated by the BUSY output which remains high while
the conversion is in progress. To ensure no errors occur
in the digitized results return the rising edge either within
40ns from the start of the conversion or wait until after
the conversion has been completed. The CNVST timing
needed to take advantage of the reduced power mode of
operation is described in the Nap Mode section.
Internal Conversion Clock
The LTC2392-16 has an internal clock that is trimmed
to achieve a maximum conversion time of 1300ns. No
external adjustments are required and with a maximum
acquisition time of 685ns, a throughput performance of
500ksps is guaranteed.
DIGITAL INTERFACE
The LTC2392-16 allows both parallel and serial digital
interfaces.TheflexibleOVPsupplyallowstheLTC2392-16
to communicate with any digital logic operating between
1.8V and 5V, including 2.5V and 3.3V systems.
Figure 7. Power Dissipation of the LTC2392-16
Decreases with Decreasing Sampling Frequency
SAMPLING FREQUENCY (kHz)
10
POWER
SUPPL
YCURRENT
(mA)
20
30
5
15
25
0.1
10
100
1000
239216 G15
0
1
相关PDF资料 |
PDF描述 |
|---|---|
| ADM3078EYRZ-REEL7 | TXRX 3V 15KV 500KBPS ESD 8-SOIC |
| AD7572AJRZ10 | IC ADC 12BIT HS LC2MOS 24SOIC |
| ADM211EARU-REEL | IC TXRX RS-232 5V 0.1UF 28TSSOP |
| ADM207EARU-REEL | IC TXRX RS232 5DVR/3REC 24TSSOP |
| LT1381CS#TRPBF | IC DVR/RCVR 5V RS232 DUAL 16SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC2392CUK-16#PBF | 功能描述:IC ADC 16BIT SER/PAR 500K 48QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 其它有关文件:TSA1204 View All Specifications 标准包装:1 系列:- 位数:12 采样率（每秒）:20M 数据接口:并联 转换器数目:2 功率耗散（最大）:155mW 电压电源:模拟和数字 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-TQFP 供应商设备封装:48-TQFP（7x7） 包装:Digi-Reel® 输入数目和类型:4 个单端，单极；2 个差分，单极 产品目录页面:1156 (CN2011-ZH PDF) 其它名称:497-5435-6 |
| LTC2392CUK-16#PBF | 制造商:Linear Technology 功能描述:ANALOG TO DIGITAL (A/D) CONVERTER IC |
| LTC2392CUK-16#TRPBF | 功能描述:IC ADC 16B SER/PAR 500K 48QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| LTC2392HLX-16#PBF | 功能描述:IC ADC 16B SER/PAR 500K 48LQFP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
| LTC2392ILX-16#PBF | 功能描述:IC ADC 16B SER/PAR 500K 48LQFP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
发布紧急采购，3分钟左右您将得到回复。