- 您现在的位置：买卖IC网 > PDF目录10142 > LTC2392ILX-16#PBF (Linear Technology)IC ADC 16B SER/PAR 500K 48LQFP PDF资料下载
参数资料
| 型号： | LTC2392ILX-16#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 9/26页 |
| 文件大小： | 0K |
| 描述： | IC ADC 16B SER/PAR 500K 48LQFP |
| 标准包装： | 250 |
| 位数： | 16 |
| 采样率（每秒）： | 500k |
| 数据接口： | 串行，并联 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 135mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 48-LQFP |
| 供应商设备封装： | 48-LQFP（7x7） |
| 包装： | 托盘 |
| 输入数目和类型： | 1 个差分，双极 |
| 配用： | DC1500A-B-ND - BOARD SAR ADC LTC2392-16 |
LTC2392-16
17
239216fa
applications inFormation
Parallel Modes
The parallel output data interface is active when the
SER/PAR pin is tied low and when both CS and RD are low.
The output data can be read as a 16-bit word as shown
in Figures 8, 9 and 10 or it can be read as two 8-bit bytes
by using the BYTESWAP pin. As shown in Figure 11, with
the BYTESWAP pin low, the first eight MSBs are output
on the D15 to D8 pins and the eight LSBs are output on
the D7 to DO pins. When BYTESWAP is taken high, the
eight LSBs now are output on the D15 to D8 pins and the
eight MSBs are output on the D7 to D0 pins.
Serial Modes
The serial output data interface is active when the
SER/PAR pin is tied high and when both CS and RD are
low. The serial output data will be clocked out on the
SDOUT pin when an external clock is applied to the SCLK
pin. Clocking out the data after the conversion will yield
the best performance. With a shift clock frequency of at
least 25MHz, a 500ksps throughput is achieved. The serial
output data changes state on the rising edge of SCLK and
can be captured on the falling edge of SCLK. D15 remains
valid till the first rising edge of shift clock after the first
falling edge of shift clock. The non-active digital outputs
are high impedance when operating in the serial mode.
If CS and RD are used to gate the serial output data, the
full conversion result should be read before CS and RD
are returned to a high level.
The SDIN input pin is used to daisychain multiple con-
verters. This is useful for applications where hardware
constraints may limit the number of lines needed to
interface to a large number of converters. For example,
if two devices are cascaded, the MSB of the first device
will appear at the output after 17 SCLK cycles. The first
MSB is clocked in on the falling edge of the first SCLK.
See Figure 12.
Data Format
When OB/2C is high, the digital output is offset binary.
When low, the MSB is inverted resulting in two’s comple-
ment output. This pin is active in both the parallel and
serial modes of operation.
Reset
When the RESET pin is high, the LTC2392-16 is reset, and
if this occurs during a conversion, the conversion is halted
and the data bus is put into Hi-Z mode. In reset, requests
fornewconversionsareignored.OnceRESETreturnslow,
the LTC2392-16 is ready to start a new conversion after
the acquisition time plus 1s has been met. See Figure 13.
Figure 8. Read the Parallel Data Continuously.
The Data Bus is Always Driven and Can’t Be Shared
CS = RD = 0
t4
t6
t16
tCONV
CNVST
BUSY
DATA BUS D[15:0]
PREVIOUS CONVERSION
NEW
239216 F08
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1690IS8#TR | IC TXRX DIFF FAILSAFE LP 8SOIC |
| VE-BN2-MW-F2 | CONVERTER MOD DC/DC 15V 100W |
| EN3C16F26X | CONN PLUG 16POS FEMALE CORD #26 |
| SP206EA-L | IC TXRX RS232 SERIAL 24SSOP |
| AD9251BCPZRL7-20 | IC ADC 14BIT 20MSPS 64LFCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC2392IUK-16#PBF | 功能描述:IC ADC 16B SER/PAR 500K 48QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
| LTC2392IUK-16#TRPBF | 功能描述:IC ADC 16B SER/PAR 500K 48QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
| LTC2393CLX-16#PBF | 功能描述:IC ADC 16BIT SER/PAR 1M 48-LQFP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率（每秒）:1M 数据接口:串行，SPI? 转换器数目:1 功率耗散（最大）:- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘（4x4） 包装:Digi-Reel® 输入数目和类型:8 个单端，单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6 |
| LTC2393CLX-16#PBF | 制造商:Linear Technology 功能描述:ANALOG TO DIGITAL (A/D) CONVERTER IC |
| LTC2393CUK-16#PBF | 功能描述:IC ADC 16BIT SER/PAR 1M 48-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率（每秒）:1M 数据接口:串行，SPI? 转换器数目:1 功率耗散（最大）:- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘（4x4） 包装:Digi-Reel® 输入数目和类型:8 个单端，单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6 |
发布紧急采购，3分钟左右您将得到回复。