参数资料
型号: LTC2440IGN#TR
厂商: Linear Technology
文件页数: 14/28页
文件大小: 0K
描述: IC CONV A/D 24-BIT DIFF 16-SSOP
标准包装: 2,500
位数: 24
采样率(每秒): 3.5k
数据接口: MICROWIRE?,串行,SPI?
转换器数目: 2
功率耗散(最大): 40mW
电压电源: 单电源
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 16-SSOP(0.154",3.90mm 宽)
供应商设备封装: 16-SSOP
包装: 带卷 (TR)
输入数目和类型: 1 个差分,双极
配用: DC570A-ND - BOARD DELTA SIGMA ADC LTC2440
LTC2440
21
2440fd
APPLICATIONS INFORMATION
Figure 14. LTC2440 Normal Mode Rejection
(External Oscillator at 90kHz)
The sample rate fS and NULL fN, my also be adjusted by
driving the fO pin with an external oscillator. The sample
rate is fS = fEOSC /5, where fEOSC is the frequency of the
clock applied to fO. Combining a large OSR with a reduced
sample rate leads to notch frequencies fN near DC while
maintaining simple antialiasing requirements. A 100kHz
clock applied to fO results in a NULL at 0.6Hz plus all
harmonics up to 20kHz, see Figure 14. This is useful in
applications requiring digitalization of the DC component
of a noisy input signal and eliminates the need of placing
a 0.6Hz lter in front of the ADC.
An external oscillator operating from 100kHz to 20MHz can
be implemented using the LTC1799 (resistor set SOT-23
oscillator), see Figure 22. By oating pin 4 (DIV) of the
LTC1799, the output oscillator frequency is:
f
MHz
k
R
OSC
SET
=
10
The normal mode rejection characteristic shown in Fig-
ure 14 is achieved by applying the output of the LTC1799
(with RSET = 100k) to the fO pin on the LTC2440 with SDI
tied HIGH (OSR = 32768).
Reduced Power Operation
In addition to adjusting the speed/resolution of the
LTC2440, the speed/resolution/power dissipation may
also be adjusted using the automatic sleep mode. During
the conversion cycle, the LTC2440 draws 8mA supply
current independent of the programmed speed. Once the
conversion cycle is completed, the device automatically
enters a low power sleep state drawing 8μA. The device
remains in this state as long as CS is HIGH and data is not
shifted out. By adjusting the duration of the sleep state
(hold CS HIGH longer) and the duration of the conversion
cycle (programming OSR) the DC power dissipation can
be reduced, see Figure 16.
For example, if the OSR is programmed at the fastest rate
(OSR = 64, tCONV = 0.285ms) and the sleep state is 10ms,
the effective output rate is approximately 100Hz while the
average supply current is reduced to 240μA. By further
extending the sleep state to 100ms, the effective output
rate of 10Hz draws on average 30μA. Noise, power, and
speed can be optimized by adjusting the OSR (Noise/Speed)
and sleep mode duration (Power).
DIFFERENTIAL INPUT SIGNAL FREQUENCY (Hz)
0
–40
–20
0
8
2440 F14
–60
–80
246
10
–100
–120
–140
NORMAL
MODE
REJECTION
(dB)
相关PDF资料
PDF描述
VI-25F-CU-S CONVERTER MOD DC/DC 72V 200W
LTC1594LIS#TR IC ADC 12BIT 3V 4CH SAMPL 16SOIC
VI-25D-CU-S CONVERTER MOD DC/DC 85V 200W
VI-27J-MX-S CONVERTER MOD DC/DC 36V 75W
VI-25B-CU-S CONVERTER MOD DC/DC 95V 200W
相关代理商/技术参数
参数描述
LTC2442CG 制造商:Linear Technology 功能描述:ADC Single Delta-Sigma 8ksps 24-bit Serial 36-Pin SSOP
LTC2442CG#PBF 功能描述:IC ADC 24BIT 4CH 36-SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率(每秒):1M 数据接口:串行,SPI? 转换器数目:1 功率耗散(最大):- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘(4x4) 包装:Digi-Reel® 输入数目和类型:8 个单端,单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6
LTC2442CG#TRPBF 功能描述:IC ADC 24BIT 250MSPS 36-SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率(每秒):45k 数据接口:串行 转换器数目:2 功率耗散(最大):315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC(0.295",7.50mm 宽) 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端,单极
LTC2442CGPBF 制造商:Linear Technology 功能描述:ADC 8ksps 24-Bit Serial SSOP36
LTC2442IG#PBF 功能描述:IC ADC 24BIT 4CH 36-SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率(每秒):300k 数据接口:并联 转换器数目:1 功率耗散(最大):75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC(0.295",7.50mm 宽) 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端,单极;1 个单端,双极