- 您现在的位置：买卖IC网 > PDF目录44988 > LTC2905HDDB#TRMPBF (LINEAR TECHNOLOGY CORP) 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 PDF资料下载
参数资料
| 型号： | LTC2905HDDB#TRMPBF |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 电源管理 |
| 英文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 |
| 封装： | 3 X 2 MM, LEAD FREE, PLASTIC, MO-229WECD-1, DFN-8 |
| 文件页数： | 3/16页 |
| 文件大小： | 151K |
| 代理商： | LTC2905HDDB#TRMPBF |
LTC2904/LTC2905
11
29045fd
In any supervisory application, supply noise riding on
the monitored DC voltage can cause spurious resets,
particularly when the monitored voltage is near the reset
threshold. A less desirable but common solution to this
problem is to introduce hysteresis around the nominal
threshold. Notice however, this hysteresis introduces an
error term in the threshold accuracy. Therefore, a
±2.5%
accurate monitor with
±1.0% hysteresis is equivalent to
a
±3.5% monitor with no hysteresis.
The LTC2904/LTC2905 takes a different approach to solve
this problem of supply noise causing spurious reset. The
rst line of defense against this spurious reset is a rst
order low pass lter at the output of the comparator. Thus,
the comparator output goes through a form of integration
before triggering the output logic. Therefore, any kind of
transient at the input of the comparator needs to be of
sufcient magnitude and duration before it can trigger a
change in the output logic.
The second line of defense is the programmed delay time
tRST (200ms for LTC2904 and using an external capacitor
for LTC2905). This delay will eliminate the effect of any
supply noise whose frequency is above 1/tRST on the RST
and RST output.
When either V1 or V2 drops below its programmed thresh-
old, the RST pin asserts low (RST weakly pulls high). Then
when the supply recovers above the programmed thresh-
old, the reset-pulse-generator timer starts counting.
If the supply remains above the programmed threshold
when the timer nishes counting, the RST pin weakly
pulls high (RST asserts low). However, if the supply falls
below the programmed threshold any time during the
period when the timer is still counting, the timer resets
and it starts fresh when the supply next rises above the
programmed threshold.
Note that this second line of defense is only effective
for a rising supply and does not affect the sensitivity of
the system to a falling supply. Therefore, the rst line of
defense that works for both cases of rising and falling is
necessary. These two approaches prevent spurious reset
caused by supply noise without sacricing the threshold
accuracy.
APPLICATIONS INFORMATION
Selecting the Reset Timing Capacitor
The reset timeout period for LTC2905 is adjustable in order
to accommodate a variety of microprocessor applications.
Connecting a capacitor, CTMR, between the TMR pin and
ground sets the reset timeout period, tRST. The following
formula determines the value of capacitor needed for a
particular reset timeout period:
CTMR = tRST 110 10–9 [F/s]
For example, using a standard capacitor value of 22nF
would give a 22000/110 = 200ms delay.
Figure 1 shows the desired delay time as a function of the
value of the timer capacitor that should be used:
Leaving the TMR pin open with no external capacitor gen-
erates a reset timeout of approximately 200μs. For long
reset timeout, the only limitation is the availability of large
value capacitor with low leakage. The TMR capacitor will
never charge if the leakage current exceeds the minimum
TMR charging current of 2.1μA (typical).
Figure 1. Reset Timeout Period vs Capacitance
CTMR (FARAD)
10p
100p
1n
10n
100n
1μ
RESET
TIME
OUT
PERIOD,
t
RST
(ms)
29045 F01
10000
1000
100
10
1
0.1
相关PDF资料 |
PDF描述 |
|---|---|
| LTC2905HDDB#TRPBF | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 |
| LTC2905HTS8#TRMPBF | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 |
| LTC2905ITS8#TRMPB | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 |
| LTC2910HDHC | 8-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO16 |
| LTC2910HDHC#TR | 8-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO16 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC2905HTS8#PBF | 制造商:Linear Technology 功能描述:IC SUPPLY MONITOR 65A 5.5V TSOT23-8 制造商:Linear Technology 功能描述:MS-System Monitor/Supervisor, Cut Tape Dual Supply Monitor 制造商:Linear Technology 功能描述:IC, SUPPLY MONITOR, 65 uA, 5.5V, TSOT23-8, Threshold Voltage:4.75V, No. of Supervisors / Monitors:2, Supply Voltage Min:1V, Supply Voltage Max:5.5V, Reset Type:Active-Low, Open-Drain, Digital IC Case Style:TSOT-23, No. of Pins:8 , RoHS Compliant: Yes |
| LTC2905HTS8#TRMPBF | 功能描述:IC PWR SUPPLY MON DUAL TSOT23-8 RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 标准包装:400 系列:- 类型:备用电池电路 监视电压数目:1 输出:开路漏极，推挽式 复位:高有效/低有效 复位超时:最小为 35 ms 电压 - 阀值:4.65V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:带卷 (TR) 其它名称:ADM691ARZ-REEL7TR |
| LTC2905HTS8#TRPBF | 功能描述:IC PWR SUPPLY MON DUAL TSOT23-8 RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 标准包装:400 系列:- 类型:备用电池电路 监视电压数目:1 输出:开路漏极，推挽式 复位:高有效/低有效 复位超时:最小为 35 ms 电压 - 阀值:4.65V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:带卷 (TR) 其它名称:ADM691ARZ-REEL7TR |
| LTC2905IDDB#PBF | 制造商:Linear Technology 功能描述:MONITOR 60uA 7V DFN-8 制造商:Linear Technology 功能描述:MONITOR, 60uA, 7V, DFN-8 制造商:Linear Technology 功能描述:MS-System Monitor/Supervisor, Cut Tape Dual Supply Monitor 制造商:Linear Technology 功能描述:MONITOR, 60uA, 7V, DFN-8, No. of Supervisors / Monitors:2, Supply Voltage Min:1V, Supply Voltage Max:7V, Reset Type:Active-Low, Open-Drain, Digital IC Case Style:DFN, No. of Pins:8, Supply Current:65A, Operating Temperature Max:85C, RoHS Compliant: Yes |
| LTC2905IDDB#TR | 功能描述:IC MONITOR DUAL SUPPLY PREC 8DFN RoHS:否 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 标准包装:400 系列:- 类型:备用电池电路 监视电压数目:1 输出:开路漏极，推挽式 复位:高有效/低有效 复位超时:最小为 35 ms 电压 - 阀值:4.65V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:带卷 (TR) 其它名称:ADM691ARZ-REEL7TR |
发布紧急采购，3分钟左右您将得到回复。