- 您现在的位置：买卖IC网 > PDF目录1828 > LTC3112EFE#PBF (Linear Technology)IC REG BUCK BOOST SYNC 20-TSSOP PDF资料下载
参数资料
| 型号： | LTC3112EFE#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 16/32页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK BOOST SYNC 20-TSSOP |
| 标准包装： | 74 |
| 类型： | 降压（降压），升压（升压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 2.5 V ~ 14 V |
| 输入电压： | 2.7 V ~ 15 V |
| PWM 型： | 电压模式，混合 |
| 频率 - 开关： | 750kHz |
| 电流 - 输出： | 2.5A |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽）裸露焊盘 |
| 包装： | 管件 |
| 供应商设备封装： | 20-TSSOP-EP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
LTC3112
APPLICATIONS INFORMATION
CAPACITOR VENDOR INFORMATION
Both the input bypass capacitors and output capacitors
used with the LTC3112 must be low ESR and designed
to handle the large AC currents generated by switching
converters. This is important to maintain proper functioning
of the IC and to reduce ripple on both the input and output.
Many modern low voltage ceramic capacitors experience
significant loss in capacitance from their rated value with
increased DC bias voltages. For example, it is not uncom-
mon for a small surface mount ceramic capacitor to lose
50% or more of its rated capacitance when operated near
its rated voltage. As a result, it is sometimes necessary to
use a larger value capacitance or a capacitor with a higher
voltage rating then required in order to actually realize
the intended capacitance at the full operating voltage. For
details, consult the capacitor vendor’s curve of capacitance
versus DC bias voltage.
The capacitors listed in Table 2 provide a sampling of small
surface mount ceramic capacitors that are well suited to
LTC3112 application circuits. All listed capacitors are either
X5R or X7R dielectric in order to ensure that capacitance
loss overtemperature is minimized.
Table 2. Representative Bypas s and Output Capacitors
VALUE VOLTAGE SIZE (mm)
PART NUMBER (μF) (V) L × W × H
AVX LD103D226MAB2A 22 25 3.2 × 2.5 × 2.79
Kemet C1210C476M4PAC7025 47 16 3.2 × 2.5 × 2.5
Murata GRM32ER61E226KE15L 22 25 3.6 × 2.5 × 2.5
Taiyo Yuden EMK325BJ476MM-T 47 16 3.2 × 2.5 × 2.5
TDK C5750X5RIC476M 47 16 5.7 × 5 × 2.3
PCB LAYOUT CONSIDERATIONS
The LTC3112 switches large currents at high frequencies.
Special attention should be paid to the PCB layout to ensure
a stable, noise-free and efficient application circuit. Figure 3
presents a representative 4-layer PCB layout to outline
some of the primary considerations. A few key guidelines
are outlined below:
1. A 4-layer board is highly recommended for the LTC3112
to ensure stable performance over the full operating
voltage and current range. A dedicated/solid ground
plane should be placed directly under the V IN , V OUT ,
SW1 and SW2 traces to provide a mirror plane to
minimize noise loops from high dI/dt and dV/dt edges
(see Figure 3, 2nd layer).
2. All circulating high current paths should be kept as
short as possible. Capacitor ground connections
should via down to the ground plane in the shortest
route possible. The bypass capacitors on V IN should be
placed as close to the IC as possible and should have
the shortest possible paths to ground (see Figure 3,
top layer).
3. The exposed pad is the power ground connection for
the LTC3112. Multiple vias should connect the back
pad directly to the ground plane. In addition maximi-
zation of the metallization connected to the back pad
will improve the thermal environment and improve
the power handling capabilities of the IC.
4. The high current components and their connections
should all be placed over a complete ground plane to
minimize loop cross-sectional areas. This minimizes
EMI and reduces inductive drops.
5. Connections to all of the high current components
should be made as wide as possible to reduce the
series resistance. This will improve efficiency and
maximize the output current capability of the buck-
boost converter.
6. To prevent large circulating currents from disrupting
the output voltage sensing, the ground for each resistor
divider should be returned to the ground plane using
a via placed close to the IC and away from the power
connections.
7. Keep the connection from the resistor dividers to the
feedback pins FB as short as possible and away from
the switch pin connections.
8. Crossover connections should be made on inner cop-
per layers if available. If it is necessary to place these
on the ground plane, make the trace on the ground
plane as short as possible to minimize the disruption
to the ground plane (see Figure 3, 3rd layer).
16
For more information www.linear.com/LTC3112
3112fb
相关PDF资料 |
PDF描述 |
|---|---|
| LTC3113IFE#TRPBF | IC REG BUCK BOOST ADJ 3A 20TSSOP |
| LTC3115IFE-1#TRPBF | IC REG BUCK BOOST ADJ 20-TSSOP |
| LTC3125EDCB#TRPBF | IC REG BOOST SYNC ADJ 1.2A 8DFN |
| LTC3200EMS8#TRPBF | IC REG SWITCHED CAP DBL 8MSOP |
| LTC3203BEDD-1#TRPBF | IC REG BST SWITCHED CAP 5V 10DFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC3112IDHD#PBF | 功能描述:IC REG BUCK BST SYNC ADJ 16-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LTC3112IDHD#TRPBF | 功能描述:IC REG BUCK BST SYNC ADJ 16-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LTC3112IFE#PBF | 功能描述:IC REG BUCK BST SYNC ADJ 20TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LTC3112IFE#TRPBF | 功能描述:IC REG BUCK BST SYNC ADJ 20TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LTC3113 | 制造商:LINER 制造商全称:Linear Technology 功能描述:40V, 2A Synchronous Buck-Boost DC/DC |
发布紧急采购，3分钟左右您将得到回复。