- 您现在的位置：买卖IC网 > PDF目录44991 > LTC3527EUD-1#TR (LINEAR TECHNOLOGY CORP) 0.8 A DUAL SWITCHING CONTROLLER, 2800 kHz SWITCHING FREQ-MAX, PQCC16 PDF资料下载
参数资料
| 型号： | LTC3527EUD-1#TR |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 稳压器 |
| 英文描述： | 0.8 A DUAL SWITCHING CONTROLLER, 2800 kHz SWITCHING FREQ-MAX, PQCC16 |
| 封装： | 3 X 3 MM, 0.75 MM HEIGHT, PLASTIC, MO-220WEED-2, QFN-16 |
| 文件页数： | 21/22页 |
| 文件大小： | 359K |
| 代理商： | LTC3527EUD-1#TR |
LTC3527/LTC3527-1
8
35271fc
SHDN1 (Pin 1): Boost Converter 1 Logic-Controlled
Shutdown Input. There is an internal 4M
Ω pull-down on
this pin.
SHDN1 = High: Normal free running operation, 1.2MHz/
2.2MHz typical operating frequency.
SHDN1 = Low: Shutdown, quiescent current < 2μA.
Note: Both converters must be shut down together to
achieve < 2μA quiescent current.
FB1 (Pin 2): Boost Converter 1 Feedback Input to the gm
Error Amplier. Connect resistor divider tap to this pin. The
output voltage can be adjusted from 1.6V to 5.25V by:
VV
R
See Block Diagram
OUT1
120
1
2
=+
.
(
)
MODE (Pin 3): Logic-Controlled Mode Input for Both
Boost Converters.
MODE = High: Fixed frequency operation
MODE = Low: Automatic Burst Mode operation
MODE pin must be 1V or greater to ensure xed frequency
over all operating conditions.
VOUT1 (Pin 5): Boost Converter 1 Output Voltage Sense
Input and Drain of the Internal Synchronous Rectier
MOSFET. Driver bias is derived from VOUT1. PCB trace
length from VOUT1 to the output lter capacitor(s) should
be as short and wide as possible.
SW1 (Pin 6): Boost Converter 1 Switch Pin. Connect the
inductor between SW1 and VIN1. Keep these PCB trace
lengths as short and wide as possible to reduce EMI and
voltage overshoot. If the inductor current falls to zero or
SHDN1 is low, an internal 100Ω anti-ringing switch is
connected from SW1 to VIN1 to minimize EMI.
SW2 (Pin 7): Boost Converter 2 Switch Pin. Connect the
inductor between SW2 and VIN2. Keep these PCB trace
lengths as short and wide as possible to reduce EMI and
voltage overshoot. If the inductor current falls to zero or
SHDN2 is low, an internal 100Ω anti-ringing switch is
connected from SW2 to VIN2 to minimize EMI.
VOUT2 (Pin 8): Boost Converter 2 Output Voltage Sense
Input and Drain of the Internal Synchronous Rectier
MOSFET. Driver bias is derived from VOUT2. PCB trace
length from VOUT2 to the output lter capacitor(s) should
be as short and wide as possible.
FSEL (Pin 10): Logic-Controlled Frequency Select
Input.
FSEL = High: 2.2MHz operation
FSEL = Low: 1.2MHz operation
FB2 (Pin 11): Boost Converter 2 Feedback Input to the
gm Error Amplier. Connect resistor divider tap to this
pin. The output voltage can be adjusted from 1.6V to
5.25V by:
VV
R
See Block Diagram
OUT2
120
1
3
4
=+
.
(
)
SHDN2 (Pin 12): Boost Converter 2 Logic-Controlled
Shutdown Input. There is an internal 4M
Ω pull-down on
this pin.
SHDN2 = High: Normal free-running operation,
1.2MHz/2.2MHz typical operating frequency.
SHDN2 = Low: Shutdown, quiescent current < 2μA.
Note: Both converters must be shut down together to
achieve < 2μA quiescent current.
PGOOD2 (Pin 13): Boost Converter 2 Power Good Com-
parator Output. This open-drain output is low when VFB
is 9% below its regulation voltage.
GND (Pin 14): Signal Ground. This pin is used as a
ground reference for the internal circuitry of the LTC3527/
LTC3527-1.
VIN, VIN1, VIN2 (Pins 15, 4, 9): Battery Input Voltage. See
Operation section for more information.
PGOOD1 (Pin 16) Boost Converter 1 Power Good Com-
parator Output. This open-drain output is low when VFB
is 9% below its regulation voltage.
PGND (Exposed Pad Pin 17): Backplane. The exposed pad
is PGND and must be soldered to the PCB ground plane.
It serves as the power ground connection for VOUT1 and
VOUT2, and as a means of conducting heat away from the
package.
PIN FUNCTIONS
相关PDF资料 |
PDF描述 |
|---|---|
| LTC3528EDDB-2#TRPBF | SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO8 |
| LTC3528EDDB-2#TRMPBF | SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO8 |
| LTC3529EDCB#PBF | SWITCHING CONTROLLER, PDSO8 |
| LTC3533EDE#TR | 7 A SWITCHING REGULATOR, 2000 kHz SWITCHING FREQ-MAX, PDSO14 |
| LTC3533EDE | 7 A SWITCHING REGULATOR, 2000 kHz SWITCHING FREQ-MAX, PDSO14 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC3527EUD-1-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual 800mA/400mA, 1.2MHz/2.2MHz Synchronous Step-Up DC/DC Converters |
| LTC3527EUD-PBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual 800mA/400mA, 1.2MHz/2.2MHz Synchronous Step-Up DC/DC Converters |
| LTC3527EUD-TR | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual 800mA/400mA, 1.2MHz/2.2MHz Synchronous Step-Up DC/DC Converters |
| LTC3527EUD-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual 800mA/400mA, 1.2MHz/2.2MHz Synchronous Step-Up DC/DC Converters |
| LTC3528 | 制造商:LINER 制造商全称:Linear Technology 功能描述:400mA Step-Up DC/DC Converter with Maximum Power Point Control and 250mV Start-Up |
发布紧急采购，3分钟左右您将得到回复。