参数资料
型号: LTC3554EUD-2#PBF
厂商: LINEAR TECHNOLOGY CORP
元件分类: 稳压器
英文描述: 0.6 A BATTERY CHARGE CONTROLLER, 2590 kHz SWITCHING FREQ-MAX, PQCC20
封装: 3 X 3 MM, 0.75 MM HEIGHT, LEAD FREE, PLASTIC, QFN-20
文件页数: 11/36页
文件大小: 418K
代理商: LTC3554EUD-2#PBF
LTC3554/LTC3554-2
19
35542fb
OPERATION
Therefore, the hot trip point is set when:
R
NTC|HOT
R
NOM + RNTC|HOT
V
BUS = 0.35 VBUS
and the cold trip point is set when:
R
NTC|COLD
R
NOM + RNTC|COLD
V
BUS = 0.76 V BUS
Solving these equations for RNTC|COLD and RNTC|HOT
results in the following:
RNTC|HOT = 0.538 RNOM
and
RNTC|COLD = 3.17 RNOM
By setting RNOM equal to R25, the above equations result
in rHOT = 0.538 and rCOLD = 3.17. Referencing these ratios
to the Vishay Resistance-Temperature Curve 1 chart gives
a hot trip point of about 40°C and a cold trip point of about
0°C. The difference between the hot and cold trip points
is approximately 40°C.
By using a bias resistor, RNOM, different in value from
R25, the hot and cold trip points can be moved in either
direction. The temperature span will change somewhat due
to the nonlinear behavior of the thermistor. The following
equations can be used to easily calculate a new value for
the bias resistor:
R
NOM =
r
HOT
0.538
R25
R
NOM =
r
COLD
3.17
R25
where rHOT and rCOLD are the resistance ratios at the de-
sired hot and cold trip points. Note that these equations
are linked. Therefore, only one of the two trip points can
be independently set, the other is determined by the de-
fault ratios designed in the IC.
Consider an example where a 60°C hot trip point is desired.
From the Vishay curve 1 R-T characteristics, rHOT is 0.2488
at 60°C. Using the above equation, RNOM should be set
to 46.4k. With this value of RNOM, the cold trip point is
about 16°C. Notice that the span is now 44°C rather than
the previous 40°C. This is due to the decrease in tem-
perature gain of the thermistor as absolute temperature
increases.
The upper and lower temperature trip points can be in-
dependently programmed by using an additional bias
resistor as shown in Figure 2. The following formulas can
be used to compute the values of RNOM and R1:
R
NOM =
r
COLD –r HOT
2.714
R25
R1
= 0.536 R
NOM –r HOT R25
For example, to set the trip points to 0°C and 45°C with
a Vishay curve 1 thermistor choose:
R
NOM =
3.266 – 0.4368
2.714
100k
=104.2k
the nearest 1% value is 105k
R1 = 0.536 105k – 0.4368 100k = 12.6k
The nearest 1% value is 12.7k. The nal solution is shown
in Figure 2 and results in an upper trip point of 45°C and
a lower trip point of 0°C.
相关PDF资料
PDF描述
LTC2911CTS8-4#TRM POWER SUPPLY SUPPORT CKT, PDSO8
LTI2911IDDB-3#TR POWER SUPPLY SUPPORT CKT, PDSO8
LX1555IM 1 A SWITCHING CONTROLLER, 500 kHz SWITCHING FREQ-MAX, PDIP8
LX1555CPW 1 A SWITCHING CONTROLLER, 500 kHz SWITCHING FREQ-MAX, PDSO20
LM385BZ-1.2RM 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.235 V, PBCY3
相关代理商/技术参数
参数描述
LTC3554EUD-3#PBF 制造商:Linear Technology 功能描述:IC USB POWER MANAGER 20-QFN
LTC3554EUD-3#TRPBF 制造商:Linear Technology 功能描述:IC USB POWER MANAGER 20-QFN
LTC3555 制造商:LINER 制造商全称:Linear Technology 功能描述:High Effi ciency USB Power Manager + Triple Step-Down DC/DC
LTC3555EUFD#PBF 功能描述:IC USB POWER HE 28-QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电源管理 - 专用 系列:- 标准包装:1 系列:- 应用:手持/移动设备 电流 - 电源:- 电源电压:3 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-WFDFN 裸露焊盘 供应商设备封装:14-LLP-EP(4x4) 包装:Digi-Reel® 配用:LP3905SD-30EV-ND - BOARD EVALUATION LP3905SD-30 其它名称:LP3905SD-30DKR
LTC3555EUFD#TRPBF 功能描述:IC USB POWER HE 28-QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电源管理 - 专用 系列:- 标准包装:1 系列:- 应用:手持/移动设备 电流 - 电源:- 电源电压:3 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-WFDFN 裸露焊盘 供应商设备封装:14-LLP-EP(4x4) 包装:Digi-Reel® 配用:LP3905SD-30EV-ND - BOARD EVALUATION LP3905SD-30 其它名称:LP3905SD-30DKR