- 您现在的位置：买卖IC网 > PDF目录14090 > LTC3606BEDD#TRPBF (Linear Technology)IC REG BUCK SYNC ADJ 0.8A 8DFN PDF资料下载
参数资料
| 型号： | LTC3606BEDD#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 7/20页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 0.8A 8DFN |
| 标准包装： | 2,500 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.6 V ~ 5 V |
| 输入电压： | 2.5 V ~ 5.5 V |
| PWM 型： | 电流模式，混合 |
| 频率 - 开关： | 2.25MHz |
| 电流 - 输出： | 800mA |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-WFDFN 裸露焊盘 |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 8-DFN-EP（3x3） |
LTC3606B
OPERATION
The LTC3606B uses a constant-frequency, current mode
architecture. The operating frequency is set at 2.25MHz.
The output voltage is set by an external resistor divider
returned to the V FB pins. An error ampli?er compares the
divided output voltage with a reference voltage of 0.6V and
regulates the peak inductor current accordingly.
The LTC3606B continuously monitors the input current
via the voltage drop across the R DS(ON) of the internal
P-channel MOSFET. When the input current exceeds the
programmed input current limit set by an external resistor,
R LIM , the regulator’s input current is limited. The regulator
output voltage will drop to meet output current demand
and to maintain constant input current.
Main Control Loop
During normal operation, the top power switch (P-channel
MOSFET) is turned on at the beginning of a clock cycle
when the V FB voltage is below the reference voltage. The
current into the inductor and the load increases until the
peak inductor current (controlled by I TH ) is reached. The
RS latch turns off the synchronous switch and energy
stored in the inductor is discharged through the bottom
switch (N-channel MOSFET) into the load until the next
clock cycle begins, or until the inductor current begins to
reverse (sensed by the I RCMP comparator).
The peak inductor current is controlled by the internally
compensated I TH voltage, which is the output of the error
ampli?er. This ampli?er regulates the V FB pin to the internal
0.6V reference by adjusting the peak inductor current
accordingly.
When the input current limit is engaged, the peak inductor
current will be lowered, which then reduces the switching
duty cycle and V OUT . This allows the input voltage to stay
regulated when its programmed current output capability
is met.
Light Load Operation
The LTC3606B will automatically transition from continuous
operation to the pulse-skipping operation when the load
current is low. The inductor current is not ?xed during the
pulse-skipping mode which allows the LTC3606B to switch
at constant-frequency down to very low currents, where it
will begin skipping pulses to maintain output regulation.
This mode of operation exhibits low output ripple as well
as low audio noise and reduced RF interference while
providing reasonable low current ef?ciency.
Dropout Operation
When the input supply voltage decreases toward the
output voltage the duty cycle increases to 100%, which
is the dropout condition. In dropout, the PMOS switch is
turned on continuously with the output voltage being equal
to the input voltage minus the voltage drops across the
internal P-channel MOSFET and the inductor.
An important design consideration is that the R DS(ON)
of the P-channel switch increases with decreasing input
supply voltage (see the Typical Performance Characteristics
section). Therefore, the user should calculate the worst-
case power dissipation when the LTC3606B is used at
100% duty cycle with low input voltage (see Thermal
Considerations in the Applications Information section).
Soft-Start
In order to minimize the inrush current on the input by-
pass capacitor, the LTC3606B slowly ramps up the output
voltage during start-up. Whenever the RUN pin is pulled
high, the corresponding output will ramp from zero to
full-scale over a time period of approximately 950μs. This
prevents the LTC3606B from having to quickly charge the
output capacitor and thus supplying an excessive amount
of instantaneous current.
When the output is loaded heavily, for example, with mil-
lifarad of capacitance, it may take longer than 950μs to
charge the output to regulation. If the output is still low
after the soft-start time, the LTC3606B will try to quickly
charge the output capacitor. In this case, the input current
limit (after it engages) can prevent excessive amount of
instantaneous current that is required to quickly charge
the output. See the Start-Up from Shutdown curve
(C L = 4.4mF)in the Typical Performance Characteristics
section. After input current limit is engaged, the output
slowly ramps up to regulation while limited by its 500mA
of input current.
3606bfb
7
相关PDF资料 |
PDF描述 |
|---|---|
| HM71-10471LFTR | HIGH PERF LOW COST INDUCTORS |
| HM71-10331LFTR | HIGH PERF LOW COST INDUCTORS |
| LNT2H472MSEJ | CAP ALUM 4700UF 500V 20% SCREW |
| RCC31DRXI-S734 | CONN EDGECARD 62POS DIP .100 SLD |
| HM71-10221LFTR | HIGH PERF LOW COST INDUCTORS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC3606BIDD#PBF | 功能描述:IC REG BUCK SYNC ADJ 0.8A 8DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC3606BIDD#TRPBF | 功能描述:IC REG BUCK SYNC ADJ 0.8A 8DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC3607EUD#PBF | 制造商:Linear Technology 功能描述: 制造商:Linear Technology 功能描述:IC REG BUCK SYNC ADJ 0.6A 16QFN 制造商:Linear Technology 功能描述:DC-DC REGULATOR, BUCK, ADJ, QFN-16, Primary Input Voltage:15V, No. of Outputs:2, Output Current:600mA, No. of Pins:16, Operating Temperature Min:-40C, Operating Temperature Max:125C, MSL:-, Package / Case:16-QFN , RoHS Compliant: Yes 制造商:Linear Technology 功能描述:DP-SWREG/Monolithic, 15V Dual 600mA Monolithic Synchronous Step-Down DC/DC Regul |
| LTC3607EUD#TRPBF | 制造商:Linear Technology 功能描述:IC REG BUCK SYNC ADJ 0.6A 16QFN 制造商:Linear Technology 功能描述:DP-SWREG/Monolithic, 15V Dual 600mA Monolithic Synchronous Step-Down DC/DC Regul |
| LTC3608EWKG#PBF | 功能描述:IC REG BUCK SYNC ADJ 8A 52QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON（1.45x1） 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2 |
发布紧急采购，3分钟左右您将得到回复。