- 您现在的位置：买卖IC网 > PDF目录14025 > LTC3632IDD#PBF (Linear Technology)IC REG BUCK SYNC ADJ 20MA 8DFN PDF资料下载
参数资料
| 型号： | LTC3632IDD#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 14/22页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 20MA 8DFN |
| 标准包装： | 121 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.8 V ~ 50 V |
| 输入电压： | 4.5 V ~ 50 V |
| PWM 型： | Burst Mode? |
| 电流 - 输出： | 20mA |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-WFDFN 裸露焊盘 |
| 包装： | 管件 |
| 供应商设备封装： | 8-DFN-EP（3x3） |
LTC3632
APPLICATIONS INFORMATION
V IN(MAX) ? ?
? < 6V
t SS(ISET) = C ISET ?
t SS = C SS ?
Theminimumvalueofthesethresholdsislimitedtothe
internal V IN UVLO thresholds that are shown in the Electri-
cal Characteristics table. The current that flows through
this divider will directly add to the shutdown, sleep and
active current of the LTC3632, and care should be taken to
minimize the impact of this current on the overall efficiency
of the application circuit. Resistor values in the megohm
range may be required to keep the impact on quiescent
shutdown and sleep currents low. Be aware that the HYST
pin cannot be allowed to exceed its absolute maximum
rating of 6V. To keep the voltage on the HYST pin from
exceeding 6V, the following relation should be satisfied:
? R3 ?
? R1 + R2 + R3 ?
The RUN pin may also be directly tied to the V IN supply
for applications that do not require the programmable
undervoltage lockout feature. In this configuration, switch-
ing is enabled when V IN surpasses the internal undervoltage
lockout threshold.
Soft-Start
The internal 0.75ms soft-start is implemented by ramping
both the effective reference voltage from 0V to 0.8V and the
peak current limit set by the I SET pin (10mA to 50mA).
To increase the duration of the reference voltage soft-start,
place a capacitor from the SS pin to ground. An internal
5μA pull-up current will charge this capacitor, resulting in
a soft-start ramp time given by:
0.8V
5μA
When the LTC3632 detects a fault condition (input supply
undervoltage or overvoltage) or when the RUN pin falls
below 1.1V, the SS pin is quickly pulled to ground and the
internal soft-start timer is reset. This ensures an orderly
restart when using an external soft-start capacitor.
The duration of the 0.75ms internal peak current soft-
start may be increased by placing a capacitor from the
I SET pin to ground. The peak current soft-start will ramp
from 10mA to the final peak current value determined by a
resistor from I SET to ground. A 1μA current is sourced out
of the I SET pin. With only a capacitor connected between
I SET and ground, the peak current ramps linearly from
10mA to 50mA, and the peak current soft-start time can
be expressed as:
0.8V
1μA
A linear ramp of peak current appears as a quadratic
waveform on the output voltage. For the case where the
peak current is reduced by placing a resistor from I SET
to ground, the peak current offset ramps as a decaying
exponential with a time constant of R ISET ? C ISET . For this
case, the peak current soft-start time is approximately
3 ? R ISET ? C ISET .
Unlike the SS pin, the I SET pin does not get pulled to ground
during an abnormal event; however, if the I SET pin is float-
ing (programmed to 50mA peak current), the SS and I SET
pins may be tied together and connected to a capacitor
to ground. For this special case, both the peak current
and the reference voltage will soft-start on power-up and
after fault conditions. The ramp time for this combination
is C SS(ISET) ? (0.8V/6μA).
Efficiency Considerations
The efficiency of a switching regulator is equal to the output
power divided by the input power times 100%. It is often
useful to analyze individual losses to determine what is
limiting the efficiency and which change would produce
the most improvement. Efficiency can be expressed as:
Efficiency = 100% – (L1 + L2 + L3 + ...)
where L1, L2, etc. are the individual losses as a percent-
age of input power.
Although all dissipative elements in the circuit produce
losses, two main sources usually account for most of
the losses: V IN operating current and I 2 R losses. The V IN
operating current dominates the efficiency loss at very
low load currents whereas the I 2 R loss dominates the
efficiency loss at medium to high load currents.
1. The V IN operating current comprises two components:
The DC supply current as given in the electrical charac-
teristics and the internal MOSFET gate charge currents.
3632fc
14
相关PDF资料 |
PDF描述 |
|---|---|
| GSC18DREH-S734 | CONN EDGECARD 36POS .100 EYELET |
| LTC3632IMS8E#PBF | IC REG BUCK SYNC ADJ 20MA 8MSOP |
| GMC18DREH-S734 | CONN EDGECARD 36POS .100 EYELET |
| TFL0816-47N | INDUCTOR 47NH +/-2% 0603 |
| EMC12DRTN-S734 | CONN EDGECARD 24POS DIP .100 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC3632IMS8E#PBF | 功能描述:IC REG BUCK SYNC ADJ 20MA 8MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC3632IMS8E#TRPBF | 功能描述:IC REG BUCK SYNC ADJ 20MA 8MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC3633AEFE#PBF | 制造商:Linear Technology 功能描述:Conv DC-DC Single Step Down 3.6V to 20V 28-Pin TSSOP EP 制造商:Linear Technology 功能描述:IC REG BUCK ADJ 3A DL 28TSSOP 制造商:Linear Technology 功能描述:BUCK DUAL 3.6-20V 4MHZ 3A 28TSSOP 制造商:Linear Technology 功能描述:BUCK, DUAL, 3.6-20V, 4MHZ, 3A, 28TSSOP 制造商:Linear Technology 功能描述:DP-SWREG/Monolithic, Dual 3A, 20Vin, 4MHz, Monolithic Synchronous Step-Down Regu 制造商:Linear Technology 功能描述:DC-DC CONVERTER, BUCK, 4MHZ, TSSOP-28, Primary Input Voltage:15V, No. of Outputs:2, Output Current:3A, No. of Pins:28, Operating Temperature Min:-40C, Operating Temperature Max:125C, MSL:MSL 1 - Unlimited, Package / Case:28-TSSOP , RoHS Compliant: Yes |
| LTC3633AEFE#TRPBF | 制造商:Linear Technology 功能描述:Conv DC-DC Single Step Down 3.6V to 20V 28-Pin TSSOP EP T/R 制造商:Linear Technology 功能描述:IC REG BUCK ADJ 3A DL 28TSSOP |
| LTC3633AEFE-1#PBF | 制造商:Linear Technology 功能描述:Conv DC-DC Single Step Down 3.6V to 20V 28-Pin TSSOP EP 制造商:Linear Technology 功能描述:IC REG BUCK ADJ 3A DL 28TSSOP 制造商:Linear Technology 功能描述:BUCK DUAL 3.6-20V 4MHZ 3A 28TSSOP 制造商:Linear Technology 功能描述:BUCK, DUAL, 3.6-20V, 4MHZ, 3A, 28TSSOP 制造商:Linear Technology 功能描述:DP-SWREG/Monolithic, Dual 3A, 20Vin, 4MHz, Monolithic Synchronous Step-Down Regu 制造商:Linear Technology 功能描述:DC-DC CONVERTER, BUCK, 4MHZ, TSSOP-28, Primary Input Voltage:15V, No. of Outputs:2, Output Current:3A, No. of Pins:28, Operating Temperature Min:-40C, Operating Temperature Max:125C, MSL:MSL 1 - Unlimited, Package / Case:28-TSSOP , RoHS Compliant: Yes |
发布紧急采购，3分钟左右您将得到回复。