参数资料
型号: LTC3729EUH
厂商: Linear Technology
文件页数: 8/30页
文件大小: 0K
描述: IC REG CTRLR BUCK PWM CM 32-QFN
标准包装: 73
系列: PolyPhase®
PWM 型: 电流模式
输出数: 1
频率 - 最大: 590kHz
占空比: 99.5%
电源电压: 4 V ~ 36 V
降压:
升压:
回扫:
反相:
倍增器:
除法器:
Cuk:
隔离:
工作温度: -40°C ~ 85°C
封装/外壳: 32-WFQFN 裸露焊盘
包装: 管件
LTC3729
PIN FUNCTIONS
G Package/UH Package
RUN/SS (Pin 1/Pin 28): Combination of Soft?Start, Run
Control Input and Short?Circuit Detection Timer. A capaci?
tor to ground at this pin sets the ramp time to full current
output. Forcing this pin below 0.8V causes the IC to shut
down all internal circuitry. All functions are disabled in
shutdown.
SENSE1 + , SENSE2 + (Pins 2,14/Pins 30, 12): The (+)
Input to the Differential Current Comparators. The I TH
pin voltage and built?in offsets between SENSE – and
SENSE + pins in conjunction with R SENSE set the current
trip threshold.
SENSE1 – , SENSE2 – (Pins 3, 13/Pins 31, 11): The (–)
Input to the Differential Current Comparators.
EAIN (Pin 4/Pin 1): Input to the Error Amplifier that com?
pares the feedback voltage to the internal 0.8V reference
voltage. This pin is normally connected to a resistive divider
from the output of the differential amplifier (DIFFOUT).
PLLFLTR (Pin 5/Pin 2): The Phase?Locked Loop’s Low
Pass Filter is tied to this pin. Alternatively, this pin can
be driven with an AC or DC voltage source to vary the
frequency of the internal oscillator.
PLLIN (Pin 6/Pin 3): External Synchronization Input to
Phase Detector. This pin is internally terminated to SGND
with 50kΩ. The phase?locked loop will force the rising
top gate signal of controller 1 to be synchronized with
the rising edge of the PLLIN signal.
PHASMD (Pin 7/Pin 4): Control Input to Phase Selector
which determines the phase relationships between control?
ler 1, controller 2 and the CLKOUT signal.
I TH (Pin 8/Pin 5): Error Amplifier Output and Switching
Regulator Compensation Point. Both current comparator’s
thresholds increase with this control voltage. The normal
voltage range of this pin is from 0V to 2.4V.
SGND (Pin 9/Pin 6): Signal Ground, common to both con?
trollers, must be routed separately from the input switched
current ground path to the common (–) terminal(s) of the
C OUT capacitor(s).
V DIFFOUT (Pin 10/Pin 7): Output of a Differential Amplifier
that provides true remote output voltage sensing. This pin
normally drives an external resistive divider that sets the
output voltage.
V OS– , V OS+ (Pins 11, 12/Pins 8, 9): Inputs to an Operational
Amplifier. Internal precision resistors capable of being
electronically switched in or out can configure it as a dif?
ferential amplifier or an uncommitted Op Amp.
PGOOD (Pin 15/Pin 13): Open?Drain Logic Output. PGOOD
is pulled to ground when the voltage on the EAIN pin is
not within ± 7.5% of its set point.
TG2, TG1 (Pins 16, 27/Pins 14, 26): High Current Gate
Drives for Top N?Channel MOSFETS. These are the outputs
of floating drivers with a voltage swing equal to INTV CC
superimposed on the switch node voltage SW.
SW2, SW1 (Pins 17, 26/Pins 15, 25): Switch Node
Connections to Inductors. Voltage swing at these pins
is from a Schottky diode (external) voltage drop below
ground to V IN .
BOOST2, BOOST1 (Pins 18, 25/Pins 17, 24): Bootstrapped
Supplies to the Topside Floating Drivers. Capacitors
are connected between the Boost and Switch pins and
Schottky diodes are tied between the Boost and INTV CC
pins. Voltage swing at the Boost pins is from INTV CC to
(V IN + INTV CC ).
BG2, BG1 (Pins 19, 23/Pins 18, 22): High Current Gate
Drives for Bottom Synchronous N?Channel MOSFETS.
Voltage swing at these pins is from ground to INTV CC .
PGND (Pin 20/Pin 19): Driver Power Ground. Connect
to sources of bottom N?channel MOSFETS and the (–)
terminals of C IN .
INTV CC (Pin 21/Pin 20): Output of the Internal 5V Linear
Low Dropout Regulator and the EXTV CC Switch. The driver
and control circuits are powered from this voltage source.
Decouple to power ground with a 1μF ceramic capacitor
placed directly adjacent to the IC and minimum of 4.7μF
additional tantalum or other low ESR capacitor.
3729fb
8
相关PDF资料
PDF描述
VI-25Z-EU-F1 CONVERTER MOD DC/DC 2V 80W
SRP1040-R75M INDUCTOR 750NH 22A SMD
LTC3880IUJ#TRPBF IC REG CTRLR BUCK PWM CM 40-QFN
SRP1040-R56M INDUCTOR 560NH 25A SMD
LTC3880IUJ-1#TRPBF IC REG CTRLR BUCK PWM CM 40-QFN
相关代理商/技术参数
参数描述
LTC3729EUH#PBF 功能描述:IC REG CTRLR BUCK PWM CM 32-QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:PolyPhase® 特色产品:LM3753/54 Scalable 2-Phase Synchronous Buck Controllers 标准包装:1 系列:PowerWise® PWM 型:电压模式 输出数:1 频率 - 最大:1MHz 占空比:81% 电源电压:4.5 V ~ 18 V 降压:是 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:无 工作温度:-5°C ~ 125°C 封装/外壳:32-WFQFN 裸露焊盘 包装:Digi-Reel® 产品目录页面:1303 (CN2011-ZH PDF) 其它名称:LM3754SQDKR
LTC3729EUH#TR 功能描述:IC REG CTRLR BUCK PWM CM 32-QFN RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:PolyPhase® 标准包装:4,500 系列:PowerWise® PWM 型:控制器 输出数:1 频率 - 最大:1MHz 占空比:95% 电源电压:2.8 V ~ 5.5 V 降压:是 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:无 工作温度:-40°C ~ 125°C 封装/外壳:6-WDFN 裸露焊盘 包装:带卷 (TR) 配用:LM1771EVAL-ND - BOARD EVALUATION LM1771 其它名称:LM1771SSDX
LTC3729EUH#TRPBF 功能描述:IC REG CTRLR BUCK PWM CM 32-QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:PolyPhase® 标准包装:4,500 系列:PowerWise® PWM 型:控制器 输出数:1 频率 - 最大:1MHz 占空比:95% 电源电压:2.8 V ~ 5.5 V 降压:是 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:无 工作温度:-40°C ~ 125°C 封装/外壳:6-WDFN 裸露焊盘 包装:带卷 (TR) 配用:LM1771EVAL-ND - BOARD EVALUATION LM1771 其它名称:LM1771SSDX
LTC3729LEUH-6 功能描述:IC REG CTRLR BUCK PWM CM 32-QFN RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:PolyPhase® 标准包装:4,500 系列:PowerWise® PWM 型:控制器 输出数:1 频率 - 最大:1MHz 占空比:95% 电源电压:2.8 V ~ 5.5 V 降压:是 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:无 工作温度:-40°C ~ 125°C 封装/外壳:6-WDFN 裸露焊盘 包装:带卷 (TR) 配用:LM1771EVAL-ND - BOARD EVALUATION LM1771 其它名称:LM1771SSDX
LTC3729LEUH-6#PBF 功能描述:IC REG CTRLR BUCK PWM CM 32-QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:PolyPhase® 标准包装:4,500 系列:PowerWise® PWM 型:控制器 输出数:1 频率 - 最大:1MHz 占空比:95% 电源电压:2.8 V ~ 5.5 V 降压:是 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:无 工作温度:-40°C ~ 125°C 封装/外壳:6-WDFN 裸露焊盘 包装:带卷 (TR) 配用:LM1771EVAL-ND - BOARD EVALUATION LM1771 其它名称:LM1771SSDX