- 您现在的位置：买卖IC网 > PDF目录1833 > LTC4011CFE#TRPBF (Linear Technology)IC BATT CHARGER HIEFF 20TSSOP PDF资料下载
参数资料
| 型号： | LTC4011CFE#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 17/26页 |
| 文件大小： | 0K |
| 描述： | IC BATT CHARGER HIEFF 20TSSOP |
| 标准包装： | 2,500 |
| 功能： | 充电管理 |
| 电池化学： | 镍镉（NiCd）、镍金属氢化物（NiMH） |
| 电源电压： | 4.5 V ~ 34 V |
| 工作温度： | 0°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽）裸露焊盘 |
| 供应商设备封装： | 20-TSSOP-EP |
| 包装： | 带卷 (TR) |
LTC4011
APPLICATIONS INFORMATION
is recommended for rejecting PWM switching noise. The
value of C1 should be chosen to yield a 1st order lowpass
frequency of less than 500Hz. In the case of a single cell,
the external application circuit shown in Figure 4 is rec-
ommended to provide the necessary noise filtering and
missing battery detection.
Thermistor Network Design
V CDIV
V CELL
V RT
The network for proper temperature sensing using a
thermistor with a negative temperature coefficient (NTC)
is shown in Figure 5. R3 is only present for thermistors
with an exponential temperature coefficient ( β ) above
3750. For thermistors with β below 3750, replace R3
with a short.
BAT
12 1 CELL
10k 10k
9
8
33nF
4011 F04
Figure 4. Single-Cell Monitor Network
6
R1 R4
51k V TEMP
R3 7
C1
R T R2 10nF
4011 F05
Figure 5. External NTC Thermistor Network
The LTC4011 is designed to work best with a 5% 10K NTC
thermistor with a β near 3750, such as the Siemens/EPCOS
B57620C103J062. In this case, the values for the external
network are given by:
R1 = 9.76k
R2 = 28k
R3 = 0Ω
However, the LTC4011 will operate with other NTC therm-
istors having different nominal values or exponential
temperature coefficients. For these thermistors, the design
equations for the resistors in the external network are:
where:
R 0 = thermistor resistance (Ω) at T 0
T 0 = thermistor reference temperature (°K)
β = exponential temperature coefficient of resistance
For thermistors with β less than 3750, the equation for R3
yields a negative number. This number should be used to
compute R2, even though R3 is replaced with a short in the
actual application. An additional high temperature charge
qualification error of between 0°C and 5°C may occur when
using thermistors with β lower than 3750. Thermistors
with nominal β less than 3300 should be avoided.
The filter formed by R4 and C1 in Figure 5 is optional
but recommended for rejecting PWM switching noise.
Alternatively, R4 may be replaced by a short, and a value
chosen for C1 which will provide adequate filtering from
the Thevenin impedance of the remaining thermistor net-
work. The filter pole frequency, which should be less than
500Hz, will vary more with battery temperature without
R4. External components should be chosen to make the
Thevenin impedance from V TEMP to GND 100kΩ or less,
including R4, if present.
Disabling Thermistor Functions
Temperature sensing is optional in LTC4011 applications.
For low cost systems where temperature sensing may
not be required, the V TEMP pin may simply be wired to
V RT to disable temperature qualification of all charging
4011fb
相关PDF资料 |
PDF描述 |
|---|---|
| LTC4012IUF-3#TRPBF | IC CTLR BATT CHARGER CC/CV 20QFN |
| LTC4050EMS-4.1#TR | IC BATT CHRG CNTRL LI-ION 10MSOP |
| LTC4052EMS8E-4.2#TRPBF | IC CHARGER PULSE LI-ION 8-MSOP |
| LTC4053EDD-4.2#TRPBF | IC CHARGER BATTERY USB 10-DFN |
| LTC4054ES5-4.2#TRMPBF | IC CHARGR BATTERY L-ION TSOT23-5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4011EFE | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Efficiency Standalone Nickel Battery Charger |
| LTC4012 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Effi ciency, Multi-Chemistry Battery Charger with PowerPath Control |
| LTC4012-1 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Effi ciency, Multi-Chemistry Battery Charger with PowerPath Control |
| LTC4012-2 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Effi ciency, Multi-Chemistry Battery Charger with PowerPath Control |
| LTC4012-3 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Efficiency, Multi-Chemistry Battery Charger with PowerPath Control |
发布紧急采购，3分钟左右您将得到回复。