参数资料
型号: LTC4052EMS8E-4.2
厂商: Linear Technology
文件页数: 6/12页
文件大小: 0K
描述: IC CHARGER PULSE LI-ION 8-MSOP
标准包装: 50
功能: 充电管理
电池化学: 锂离子(Li-Ion)
电源电压: 4.5 V ~ 10 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 8-TSSOP,8-MSOP(0.118",3.00mm 宽)裸露焊盘
供应商设备封装: 8-MSOP-EP
包装: 管件
LTC4052-4.2
OPERATIO
The LTC4052 is a complete lithium-ion battery pulse
charger with an internal 0.35 ? N-MOSFET switch driven
by an internal charge pump. The charge current is set by
the current limit of the input supply (wall adapter). An
external R SENSE sets the maximum allowable charge
overcurrent and prevents a wall adapter with a high
current limit from damaging the battery. If the current limit
of the input supply is above I MAX , the charger will imme-
diately turn off the N-MOSFET switch and will retry after
640ms, thus reducing the average charge current to
approximately 1% of the overcurrent value (C TIMER =
0.1 μ F). If the battery is disconnected while in full charge
mode, the charge pump turns off when the voltage at the
BAT pin rises above 4.7V and turns back on when the
voltage drops below the float voltage.
A charge cycle begins when the voltage at the V IN pin rises
above the BAT pin by 45mV. The charger will go into trickle
charge mode if the battery voltage is below 2.45V. The
trickle charge current is preset to 24mA and is provided by
an internal current source. In trickle mode, both the pass
transistor and charge pump are off.
When the cell voltage exceeds 2.45V, the charger goes
into full charge mode. In this mode, the charge pump turns
on and ramps up the gate voltage of the pass transistor
turning it on. The current limited voltage at the V IN pin will
ramp down to V BAT plus the voltage drop across the pass
transistor and R SENSE , thus reducing the power dissipa-
tion in the pass transistor. The charge current is deter-
mined by the current limit of the input supply.
When the battery voltage reaches the final float voltage,
the pass transistor turns off for 100ms (minimum off-
time). It remains off as long as the battery voltage stays
above the float voltage after the 100ms off-time. After the
minimum off-time, if the battery voltage drops below the
float voltage, the pass transistor turns back on for at least
400ms (minimum on-time). As the battery approaches full
charge, the off-time will get longer and the on-time will
stay at 400ms. When the N-MOSFET switch is on, the
voltage at the BAT pin will be slightly higher than the final
float voltage due to the ESR associated with the battery
pack. This voltage level should not be high enough to turn
on the overvoltage protection circuitry often located in the
battery pack. When the duty cycle at the GATE pin drops
below 10%, a comparator turns off the N-FET at the CHRG
pin and connects a weak current source (40 μ A) to ground
to indicate a near end-of-charge C/10 condition. The pulse
charging will continue until the timer stops.
An external capacitor at the TIMER pin sets the total charge
time, the minimum on- and off-time and the overcurrent
retry period. After a time-out has occurred, the charge
cycle terminates and the CHRG pin is forced high imped-
ance. After the charging stops, if the battery voltage drops
below 4.05V due to external loading or internal battery
leakage current, a new charge cycle will automatically
resume.
405242f
6
相关PDF资料
PDF描述
A3DKB-6436G IDC CABLE - AKR64B/AE64G/APK64B
VI-J0B-EZ-F1 CONVERTER MOD DC/DC 95V 25W
LTC1730EGN-4#PBF IC BATT PULSE CHRGR LI-ION16SSOP
VI-J0B-EY-S CONVERTER MOD DC/DC 95V 50W
LTC4150IMS#TR IC COUNTER/GAUGE BATTERY 10MSOP
相关代理商/技术参数
参数描述
LTC4053 制造商:LINER 制造商全称:Linear Technology 功能描述:150mA Standalone Linear Li-Ion Battery Charger in ThinSOT
LTC4053-4.2 制造商:LINER 制造商全称:Linear Technology 功能描述:USB Compatible Lithium-Ion Battery Charger with Thermal Regulation
LTC4053EDD-4.2 制造商:Linear Technology 功能描述:Battery Charger Li-Ion 500mA 4.2V 10-Pin DFN EP
LTC4053EDD-4.2#PBF 功能描述:IC CHARGER BATTERY USB 10-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子(Li-Ion)、锂聚合物(Li-Pol) 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN(6x3)裸露焊盘 包装:管件
LTC4053EDD-4.2#TRPBF 功能描述:IC CHARGER BATTERY USB 10-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子(Li-Ion)、锂聚合物(Li-Pol) 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN(6x3)裸露焊盘 包装:管件