- 您现在的位置：买卖IC网 > PDF目录80257 > LTC4075XEDD#TRPBF (LINEAR TECHNOLOGY CORP) 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10 PDF资料下载
参数资料
| 型号： | LTC4075XEDD#TRPBF |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 电源管理 |
| 英文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10 |
| 封装： | 3 X 3 MM, 0.75 MM HEIGHT, PLASTIC, MO-229WEED-2, DFN-10 |
| 文件页数： | 6/16页 |
| 文件大小： | 195K |
| 代理商： | LTC4075XEDD#TRPBF |
LTC4075/LTC4075X
14
4075Xfa
Figure 5. Low Loss Input Reverse Polarity Protection
WALL
ADAPTER
DCIN
LTC4075
DRAIN-BULK
DIODE OF FET
4075 F05
makes them especially susceptible to this problem. To
bypass the USB pin and the wall adapter input, add a 1
Ω
resistor in series with a ceramic capacitor to lower the
effective Q of the network and greatly reduce the ringing.
A tantalum, OS-CON, or electrolytic capacitor can be used
in place of the ceramic and resistor, as their higher ESR
reduces the Q, thus reducing the voltage ringing.
The oscilloscope photograph in Figure 4 shows how
serious the overvoltage transient can be for the USB
and wall adapter inputs. For both traces, a 5V supply is
hot-plugged using a three foot long cable. For the top
trace, only a 4.7F capacitor (without the recommended
1
Ω series resistor) is used to locally bypass the input.
This trace shows excessive ringing when the 5V cable
is inserted, with the overvoltage spike reaching 10V. For
the bottom trace, a 1
Ω resistor is added in series with the
4.7F capacitor to locally bypass the 5V input. This trace
shows the clean response resulting from the addition of
the 1
Ω resistor.
Even with the additional 1
Ωresistor,baddesigntechniques
and poor board layout can often make the overvoltage
problem even worse. System designers often add extra
inductance in series with input lines in an attempt to mini-
mize the noise fed back to those inputs by the application.
In reality, adding these extra inductances only makes the
overvoltage transients worse. Since cable inductance is
one of the fundamental causes of the excessive ringing,
adding a series ferrite bead or inductor increases the ef-
fective cable inductance, making the problem even worse.
For this reason, do not add additional inductance (ferrite
beads or inductors) in series with the USB or wall adapter
inputs. For the most robust solution, 6V transorbs or zener
diodes may also be added to further protect the USB and
wall adapter inputs. Two possible protection devices are
the SM2T from STMicroelectronics and the EDZ series
devices from ROHM.
Always use an oscilloscope to check the voltage wave-
forms at the USBIN and DCIN pins during USB and wall
adapter hot-plug events to ensure that overvoltage
transients have been adequately removed.
Reverse Polarity Input Voltage Protection
In some applications, protection from reverse polarity
voltage on the input supply pins is desired. If the sup-
ply voltage is high enough, a series blocking diode can
be used. In other cases where the voltage drop must be
kept low, a P-channel MOSFET can be used (as shown in
Figure 5).
APPLICATIO S I FOR ATIO
WU
U
Figure 4. Waveforms Resulting from Hot-Plugging a
5V Input Supply
4.7F ONLY
2V/DIV
4.7F + 1
Ω
2V/DIV
20s/DIV
3455 F04
相关PDF资料 |
PDF描述 |
|---|---|
| LX1552IDM-TR | 1 A SWITCHING CONTROLLER, 500 kHz SWITCHING FREQ-MAX, PDSO8 |
| LIS331AL | SPECIALTY ANALOG CIRCUIT, QCC16 |
| LS1001-7EPD6T | 1-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE |
| LS1001-7ERV3T | 1-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE |
| LS1001-7PD1B1 | 1-OUTPUT AC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4076 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Input Standalone Li-Ion Battery Charger |
| LTC4076EDD | 功能描述:IC CHARG BATT LI-ON USB 10DFN RoHS:否 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN（6x3）裸露焊盘 包装:管件 |
| LTC4076EDD#PBF | 功能描述:IC CHARG BATT LI-ON USB 10DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:2,000 系列:Impedance Track™ 功能:燃料，电量检测计/监控器 电池化学:锂离子（Li-Ion） 电源电压:2.4 V ~ 2.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:20-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:20-TSSOP 包装:带卷 (TR) 产品目录页面:1020 (CN2011-ZH PDF) 配用:BQ27350EVM-ND - BQ27350EVM 其它名称:296-21665-2 |
| LTC4076EDD#TR | 功能描述:IC CHARG BATT LI-ON USB 10DFN RoHS:否 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN（6x3）裸露焊盘 包装:管件 |
| LTC4076EDD#TRPBF | 功能描述:IC CHARG BATT LI-ON USB 10DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN（6x3）裸露焊盘 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。