- 您现在的位置：买卖IC网 > PDF目录1834 > LTC4097EDDB#TRPBF (Linear Technology)IC CHARGER LI-ION/POLY 12-DFN PDF资料下载
参数资料
| 型号： | LTC4097EDDB#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 8/20页 |
| 文件大小： | 0K |
| 描述： | IC CHARGER LI-ION/POLY 12-DFN |
| 标准包装： | 2,500 |
| 功能： | 充电管理 |
| 电池化学： | 锂离子（Li-Ion）、锂聚合物（Li-Pol） |
| 电源电压： | 4.25 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 12-WFDFN 裸露焊盘 |
| 供应商设备封装： | 12-DFN-EP（3x2） |
| 包装： | 带卷 (TR) |
LTC4097
PIN FUNCTIONS
DCIN (Pin 1): Wall Adapter Input Supply Pin. Provides
power to the battery charger. The maximum supply
current is 1.2A. This pin should be bypassed with a 1μF
capacitor.
USBIN (Pin 2): USB Input Supply Pin. Provides power to
the battery charger. The maximum supply current is 1A.
This pin should be bypassed with a 1μF capacitor.
VNTC (Pin 3): Output Bias Voltage for NTC. A resistor
from this pin to the NTC pin sets up the bias for an NTC
thermistor. When the DCIN or USBIN pin voltage is suf?cient
to begin charging (i.e. when the DCIN or USBIN supply
is greater than the undervoltage lockout thresholds and
at least 100mV or 150mV, respectively, above the battery
terminal), the VNTC pin is connected to the appropriate
input through an internal P-channel MOSFET. If suf?cient
voltage to charge is not present on DCIN or USBIN the
VNTC pin is high impedance. This output can source up
to 120mA.
C ? H ? R ? G ? (Pin 4): Open-Drain Charge Status Output. When
the LTC4097 is charging, the C ? H ? R ? G ? pin is pulled low by an
internal N-channel MOSFET. When the charge cycle is com-
pleted, C ? H ? R ? G ? becomes high impedance. This output can
sink up to 10mA, making it suitable for driving a LED.
NTC (Pin 6): Input to the NTC (Negative Temperature
Coef?cient) Thermistor Temperature Monitoring Circuit.
For normal operation, connect a thermistor from the NTC
pin to ground and a resistor of equal value from the NTC
pin to VNTC. When the voltage at this pin drops below
0.349 ? VNTC at hot temperatures or rises above
0.765 ? VNTC at cold, charging is suspended and the
? C ? H ? R ? G pin output will keep the state in which it was be-
fore the event (low-Z or high-Z). Pulling this pin below
0.017 ? VNTC disables the NTC feature. There is approxi-
mately 2°C of temperature hysteresis associated with each
of the input comparator’s thresholds.
HPWR (Pin 7): HPWR Enable Input. Used to control the
amount of current drawn from the USB port. A logic high
on the HPWR pin sets the charge current to 100% of the
current programmed by the IUSB pin. A logic low on the
HPWR pin sets the charge current to 20% of the current
programmed by the IUSB pin. An internal 3.4M Ω pull-down
resistor defaults the HPWR pin to its low current state.
ITERM (Pin 8): Charge Termination Current Threshold
Program. The termination current threshold, I TERMINATE , is
set by connecting a resistor, R ITERM , to ground. I TERMINATE
is set by the following formula:
SUSP (Pin 5): Charge Enable Input. A logic low on this
pin enables the charger. If left ?oating, an internal 3.4M Ω
I TERMINATE =
100 V
R ITERM
pull-down resistor defaults the LTC4097 to charge mode.
Pull this pin high for shutdown.
When the battery current, I BAT , falls below the termination
threshold, charging stops and the ? C ? H ? R ? G output becomes
high impedance.
4097f
8
相关PDF资料 |
PDF描述 |
|---|---|
| LTC4098EUDC#TRPBF | IC CHARGER USB COMP 20-UTQFN |
| LTC4099EUDC#PBF | IC USB PWR MANAGER/CHRGR 20-QFN |
| LTC4100EG#TR | IC CHARGER SMART BATTERY 24-SSOP |
| LTC4101EG#PBF | IC CNTRLR BATT CHRG 24-SSOP |
| LTC4110EUHF#TRPBF | IC BATTERY BACKUP MANAGER 38-QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4098 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual-Input Power Manager |
| LTC4098-1 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual-Input Power Manager |
| LTC4098-3.6 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual-Input Power Manager |
| LTC4098EPDC#PBF | 功能描述:IC CHARGER USB COMP 20-UTQFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:Bat-Track™, PowerPath™ 标准包装:1 系列:- 功能:充电管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:3.75 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:剪切带 (CT) 产品目录页面:669 (CN2011-ZH PDF) 其它名称:MCP73831T-2ACI/OTCT |
| LTC4098EPDC#TRPBF | 功能描述:IC CHARGER USB COMP 20-UTQFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:Bat-Track™, PowerPath™ 标准包装:1 系列:- 功能:充电管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:3.75 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:剪切带 (CT) 产品目录页面:669 (CN2011-ZH PDF) 其它名称:MCP73831T-2ACI/OTCT |
发布紧急采购，3分钟左右您将得到回复。