- 您现在的位置：买卖IC网 > PDF目录11614 > LTC4311CSC6#TRPBF (Linear Technology)IC ACCELERATOR SMBUS DL SC70-6 PDF资料下载
参数资料
| 型号： | LTC4311CSC6#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 11/12页 |
| 文件大小： | 0K |
| 描述： | IC ACCELERATOR SMBUS DL SC70-6 |
| 产品培训模块： | LTC4310 - Hot-Swappable I²C Isolators |
| 标准包装： | 2,500 |
| 类型： | SMBus 加速器 |
| Tx/Rx类型： | I²C Logic |
| 电源电压： | 1.6 V ~ 5.5 V |
| 电流 - 电源： | 300µA |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-TSSOP，SC-88，SOT-363 |
| 供应商设备封装： | SC-70-6 |
| 包装： | 带卷 (TR) |
LTC4311
8
4311fa
APPLICATIONS INFORMATION
A general procedure for selecting RP and RL is as fol-
lows:
1. RL is rst selected based on the I/O protection
requirement. Generally, an RS of 100Ω is sufcient for
high voltage spikes and ESD protection. RON is
determined by the size of the open-drain driver, a large
driver will have a lower RON.
2. The value of RP is determined based on the VOL and
minimum slew rate requirements. The VOLwilldetermine
the smallest resistance value that can be used in a
system, and the minimum slew requirement will bound
the resistance on the upper end. Generally the largest
value of resistance that meets the minimum slew rate
with some margin will be selected.
3. For I2C systems incorporating the LTC4311, the rise
times are met under most loading conditions, due to
the strong accelerator current. The pull-down drivers
are typically low impedance, and therefore fall times
are not generally an issue. Rise and fall time
requirements must be veried using equations 3 and
4 (for an I2C system) or equations 5 to 8 (for an SMBus
system). The value chosen for RP must ensure that
both the rise and fall time specications are met
simultaneously.
I2C Design Example
Given the following conditions and requirements:
V
CC = 3.3V NOMINAL
V
OL = 0.4V MAXIMUM
C
BUS = 600pF
V
ILMAX = 0.99V, VIHMIN = 2.31V
t
r = 0.3s MAXIMUM, t f = 0.3s MAXIMUM
(9)
If an RS of 100Ω is used and the max RON of the driver is
200Ω, then RL = 200Ω + 100Ω = 300Ω. Use equation 1
to nd the required RP to meet VOL.
R
P =
300
Ω(3.3V –0.4V)
0.4V
R
P = 2.175k
(10)
For an I2C system with xed input levels, VILMAX = 1.5V
and VIHMIN = 3V. For I2C systems with VCC related input
levels, VILMAX = 0.3VCC and VIHMIN = 0.7VCC.
CBUS is the total capacitance of the I2C line.
SMBus Rise and Fall Time
Rise time of a SMBus line is derived using equations 5,
6 and 7.
t
r = t1 +t2
(5)
t1 is the time from when the bus crosses the lower slew
rate measurement point, until the bus reaches VTHR and the
accelerators re. The time from when the accelerators re
until the bus reaches the upper slew rate measure point is
given by t2. Equations for t1 and t2 are given here:
t
1 = –RP CBUS ln
V
THR –VCC
V
ILMAX – 0.15V – VCC
(6)
If (VILMAX – 0.15V) > VTHR, then t1 = 0
t
2 = –RP CBUS
ln
V
IHMIN + 0.15V – VCC –RP I PULLUPAC
V
THR –VCC –RP IPULLUP AC
(7)
Fall time of an SMBus line is derived using equation 8:
t
f = RT CBUS
ln
V
IHMIN + 0.15V
V
CC
(R
P + RL )–RL
V
ILMAX – 0.15V
V
CC
(R
P + RL )–RL
(8)
For an SMBus system, VILMAX = 0.8V and VIHMIN = 2.1V.
CBUS is the total bus capacitance of the SMBus line.
相关PDF资料 |
PDF描述 |
|---|---|
| D38999/24MJ4PN | CONN RCPT 56POS JAM NUT W/PINS |
| D38999/26JH53SA | CONN PLUG 53POS STRAIGHT W/SCKT |
| D38999/20JJ43SA | CONN RCPT 43POS WALL MNT W/SCKT |
| PT08E-14-19S | CONN PLUG 19 POS R/A W/SCKT |
| MS-162 | CONN RECEPT COAX SWITCHING SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4311IDC#TRMPBF | 功能描述:IC ACCELERATOR SMBUS DL 6-DFN RoHS:是 类别:集成电路 (IC) >> 接口 - 信号缓冲器，中继器，分配器 系列:- 标准包装:160 系列:- 类型:转发器 Tx/Rx类型:以太网 延迟时间:- 电容 - 输入:- 电源电压:2.37 V ~ 2.63 V 电流 - 电源:60mA 安装类型:表面贴装 封装/外壳:64-TQFP 裸露焊盘 供应商设备封装:64-TQFP-EP（10x10） 包装:托盘 其它名称:Q5134101 |
| LTC4311IDC#TRPBF | 功能描述:IC ACCELERATOR SMBUS DL 6-DFN RoHS:是 类别:集成电路 (IC) >> 接口 - 信号缓冲器，中继器，分配器 系列:- 标准包装:160 系列:- 类型:转发器 Tx/Rx类型:以太网 延迟时间:- 电容 - 输入:- 电源电压:2.37 V ~ 2.63 V 电流 - 电源:60mA 安装类型:表面贴装 封装/外壳:64-TQFP 裸露焊盘 供应商设备封装:64-TQFP-EP（10x10） 包装:托盘 其它名称:Q5134101 |
| LTC4311ISC6#PBF | 制造商:Linear Technology 功能描述:IC I2C / SMBUS ACCELERATOR 6SC-71 制造商:Linear Technology 功能描述:IC, I2C / SMBUS ACCELERATOR, 6SC-71 制造商:Linear Technology 功能描述:MS-Bus Buffers, CUT TAPE I2C/SMBus Rise Time Accelerator 制造商:Linear Technology 功能描述:I2C/SMBUS ACCELERATOR, 5.5V, SC-70-6, IC Interface Type:I2C, Interface Applications:Battery Chargers, Industrial Control, Notebook and Palmtop Computers, Portable Instruments, TV/Video, Supply Voltage Min:1.6V, No. of Pins:6 , RoHS Compliant: Yes |
| LTC4311ISC6#TRMPBF | 功能描述:IC ACCELERATOR SMBUS DL SC70-6 RoHS:是 类别:集成电路 (IC) >> 接口 - 信号缓冲器，中继器，分配器 系列:- 标准包装:160 系列:- 类型:转发器 Tx/Rx类型:以太网 延迟时间:- 电容 - 输入:- 电源电压:2.37 V ~ 2.63 V 电流 - 电源:60mA 安装类型:表面贴装 封装/外壳:64-TQFP 裸露焊盘 供应商设备封装:64-TQFP-EP（10x10） 包装:托盘 其它名称:Q5134101 |
| LTC4311ISC6#TRPBF | 功能描述:IC ACCELERATOR SMBUS DL SC70-6 RoHS:是 类别:集成电路 (IC) >> 接口 - 信号缓冲器，中继器，分配器 系列:- 标准包装:160 系列:- 类型:转发器 Tx/Rx类型:以太网 延迟时间:- 电容 - 输入:- 电源电压:2.37 V ~ 2.63 V 电流 - 电源:60mA 安装类型:表面贴装 封装/外壳:64-TQFP 裸露焊盘 供应商设备封装:64-TQFP-EP（10x10） 包装:托盘 其它名称:Q5134101 |
发布紧急采购，3分钟左右您将得到回复。