- 您现在的位置：买卖IC网 > PDF目录11620 > LTC4312IDE#PBF (Linear Technology)IC MULTIPLEXER 14-DFN PDF资料下载
参数资料
| 型号： | LTC4312IDE#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 4/20页 |
| 文件大小： | 0K |
| 描述： | IC MULTIPLEXER 14-DFN |
| 标准包装： | 91 |
| 系列： | * |
LTC4312
12
4312f
Figure 5. Cascading LTC4312s with Other LTC4312s and LTC Bus Buffers. Only the SDA Path Is Shown for Simplicity
or SDAIN is regulated to a logic low voltage as directed
by equation 4 which uses SDA as an example:
VSDAIN(V)= VSDAOUT + 45mV +10Ω
VDD,BUS
RBUS
(4)
The SCLOUT/SDAOUT to SCLIN/SDAIN offset is lower
than the reverse case as the multiplexer transmission gate
does not affect this offset. For driven logic low voltages
< 200mV, the above equations do not apply as the saturation
voltage of the open collector output transistor results in a
higher offset. However, the offset is guaranteed to be less
than 400mV for a total bus pull-up current of 4mA under
all conditions. See the Typical Performance Characteristics
curves for the buffer offset voltage as a function of the
driven logic low voltage and bus pull-up current.
The high-to-low propagation delay arises due to both the
nite response time of the buffers and their nite current
sink capability. See the Typical Performance Characteristics
curves for the propagation delay as a function of the bus
capacitance.
APPLICATIONS INFORMATION
Cascading LTC4312 Devices and Other LTC Bus Buffers
Multiple LTC4312s can be cascaded or the LTC4312 may
be cascaded with other LTC bus buffers as required by the
application. This is shown for the data pathway in Figure 5
where an LTC4312 is cascaded with other LTC4312s and
some select LTC bus buffers. The clock path is identical.
When using such cascades, users should be aware of the
additive logic low offset voltages (VOS) when determin-
ing system noise margin. If the sum of the offsets (refer
to Equations 3 and 4 and to the data sheets of the cor-
responding bus buffers) plus the worst-case driven logic
low voltage across the cascade exceeds the buffer turn off
voltage, signals will not be propagated across the cascade.
Also the minimum rise time accelerator (RTA) turn-on volt-
age (wherever applicable) of each device in the cascade
should also be greater than the maximum buffer turn-off
voltage of all the devices in the cascade. This condition
is required to prevent contention between one device’s
buffer and another’s RTA. Based on this requirement,
LTC4312
GND
3.3V
R1
10k
C1
0.01μF
VCC
VCC2
4312 F05
SDAOUT1
SDAOUT2
SDAIN
ACC
3.3V
LTC4312
VCC
VCC2
SDAOUT1
SDAOUT2
SDAIN
ACC
LTC4301
GND
VCC
SDAOUT
SDAIN
5V
LTC4312
GND
3.3V
C2
0.01μF
VCC
VCC2
SDAOUT1
SDAOUT2
SDAIN
ACC
C3
0.01μF
R2
10k
R3
10k
R4
10k
C4
0.01μF
C5
0.01μF
R5
10k
R6
10k
5V
3.3V
R7
10k
SDAOUT1
SDAOUT2
SDAOUT3
SDAOUT4
SDAOUT5
LTC4303
VCC
SDAOUT
SDAIN
5V
R8
10k
LTC4307
VCC
SDAOUT
SDAIN
5V
R9
10k
GND
相关PDF资料 |
PDF描述 |
|---|---|
| VI-J6R-IY-F3 | CONVERTER MOD DC/DC 7.5V 50W |
| D38999/26SD97PN | CONN PLUG 12POS STRAIGHT W/PINS |
| LTC4312CMS#PBF | IC MULTIPLEXER 16-MSOP |
| MS3106A36-52S | CONN PLUG 52POS STRAIGHT W/SCKT |
| VI-J6R-IY-F2 | CONVERTER MOD DC/DC 7.5V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4312IMS#PBF | 功能描述:IC MULTIPLEXER 16-MSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 信号缓冲器，中继器，分配器 系列:* 标准包装:160 系列:- 类型:转发器 Tx/Rx类型:以太网 延迟时间:- 电容 - 输入:- 电源电压:2.37 V ~ 2.63 V 电流 - 电源:60mA 安装类型:表面贴装 封装/外壳:64-TQFP 裸露焊盘 供应商设备封装:64-TQFP-EP（10x10） 包装:托盘 其它名称:Q5134101 |
| LTC4312IMS#TRPBF | 功能描述:IC MULTIPLEXER 16-MSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 信号缓冲器，中继器，分配器 系列:* 标准包装:160 系列:- 类型:转发器 Tx/Rx类型:以太网 延迟时间:- 电容 - 输入:- 电源电压:2.37 V ~ 2.63 V 电流 - 电源:60mA 安装类型:表面贴装 封装/外壳:64-TQFP 裸露焊盘 供应商设备封装:64-TQFP-EP（10x10） 包装:托盘 其它名称:Q5134101 |
| LTC4313CDD-1#PBF | 功能描述:IC 2WIRE BUS BUFFER 8DFN RoHS:是 类别:集成电路 (IC) >> 接口 - 信号缓冲器，中继器，分配器 系列:- 标准包装:160 系列:- 类型:转发器 Tx/Rx类型:以太网 延迟时间:- 电容 - 输入:- 电源电压:2.37 V ~ 2.63 V 电流 - 电源:60mA 安装类型:表面贴装 封装/外壳:64-TQFP 裸露焊盘 供应商设备封装:64-TQFP-EP（10x10） 包装:托盘 其它名称:Q5134101 |
| LTC4313CDD-1#TRPBF | 功能描述:IC 2WIRE BUS BUFFER 8DFN RoHS:是 类别:集成电路 (IC) >> 接口 - 信号缓冲器，中继器，分配器 系列:- 标准包装:160 系列:- 类型:转发器 Tx/Rx类型:以太网 延迟时间:- 电容 - 输入:- 电源电压:2.37 V ~ 2.63 V 电流 - 电源:60mA 安装类型:表面贴装 封装/外壳:64-TQFP 裸露焊盘 供应商设备封装:64-TQFP-EP（10x10） 包装:托盘 其它名称:Q5134101 |
| LTC4313CDD-2#PBF | 功能描述:IC 2WIRE BUS BUFFER 8DFN RoHS:是 类别:集成电路 (IC) >> 接口 - 信号缓冲器，中继器，分配器 系列:- 标准包装:160 系列:- 类型:转发器 Tx/Rx类型:以太网 延迟时间:- 电容 - 输入:- 电源电压:2.37 V ~ 2.63 V 电流 - 电源:60mA 安装类型:表面贴装 封装/外壳:64-TQFP 裸露焊盘 供应商设备封装:64-TQFP-EP（10x10） 包装:托盘 其它名称:Q5134101 |
发布紧急采购，3分钟左右您将得到回复。