参数资料
型号: LTC4315IMS#TRPBF
厂商: Linear Technology
文件页数: 9/20页
文件大小: 0K
描述: IC 2WIRE BUS BUFFER 12MSOP
标准包装: 2,500
类型: 2线总线缓冲器
Tx/Rx类型: I²C Logic
电容 - 输入: 10pF
电源电压: 2.9 V ~ 5.5 V
电流 - 电源: 8.1mA
安装类型: 表面贴装
封装/外壳: 12-TSSOP(0.118",3.00mm 宽)
供应商设备封装: 12-MSOP
包装: 带卷 (TR)
LTC4315
17
4315f
APPLICATIONS INFORMATION
example, there are three LTC4300As, one LTC4307 and
one LTC4315. The SCL1 bus is driven by an I2C master
(master not shown). When the SCL2 voltage crosses
0.6V and 0.8V, the RTAs on the LTC4300A and LTC4307
turn on respectively and source current into SCL2. The
LTC4315 detects this and turns off its buffers, releasing
SCL1 and SCL2 high. Contention between the LTC4315
buffers and the LTC4300A and LTC4307 RTAs is prevented
and the SCL1, SCL2 and SCL3 waveforms in Figure 11 are
monotonic. The logic low noise margin is reduced because
the LTC4315 buffers turn off when the SCL1 voltage is
approximately 0.6V.
Generally, noise margin will be reduced if other RTAs
turn on at a voltage less than 0.3 VMIN. The reduction
in noise margin is a function of the number of LTC4315s
and the number and turn-on voltage of other RTAs, whose
current must be sunk by the LTC4315 buffers. The same
arguments apply for non-LTC buffer products whose RTA
turn-on voltage is less than 0.3 VMIN.
Interoperability is improved by reducing the interaction time
between the LTC4315 buffers and other RTAs by reducing
R1 and CB1. The following guidelines are recommended
for single supply systems,
a. For 5V systems choose R1 < 20k and CB1 < 1nF. There
are no other constraints.
b. For 3.3V systems, refer to Figures 12 and 13 for opera-
tion with LTC4300As and LTC4307s. In the figures:
M
=
Number of LTC4300As or LTC4307s
Number of LTC4315s
R1 and CB1 must be chosen to be below the curves for a
specific value of M. For M greater than the values shown
in the figures, non-idealities do not result. R1 < 20k and
CB1 <1nF are still recommended.
Figure 12. Recommended Maximum R1 and CB1 Values for the
LTC4315 Operating with Multiple LTC4300As in a 3.3V System.
Figure 13. Recommended Maximum R1 and CB1 Values for the
LTC4315 Operating with Multiple LTC4307s in a 3.3V System.
RBUS (kΩ)
02
C
BUS
(pF)
1000
100
10
4
4315 F12
10
68
M = 1
M = 2
M = 3
RBUS (kΩ)
02
C
BUS
(pF)
10000
1000
100
4
4315 F13
10
68
M = 1
相关PDF资料
PDF描述
LTC485IS8#TRPBF IC TXRX INTRFC RS485 LOPWR 8SOIC
LTC487IN#PBF IC DVR RS485 LOW PWR QUAD 16-DIP
LTC488ISW#TRPBF IC LINE RCVR RS485 QUAD 16-SOIC
LTC6601CUF-2#PBF IC DRVR FILTER/ADC LN 20-QFN
LTC6601IUF-1#TRPBF IC DRVR FILTER/ADC LN 20-QFN
相关代理商/技术参数
参数描述
LTC435 制造商:Thomas & Betts 功能描述:TSB COVER,4WAY,350MCM
LTC4350CGN 功能描述:IC CNTRLR HOTSWAP LOADSHAR16SSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:119 系列:- 类型:热交换控制器 应用:通用型,PCI Express? 内部开关:无 电流限制:- 电源电压:3.3V,12V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:80-TQFP 供应商设备封装:80-TQFP(12x12) 包装:托盘 产品目录页面:1423 (CN2011-ZH PDF)
LTC4350CGN#PBF 功能描述:IC CTLR HOTSWAP LOADSHARE 16SSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:119 系列:- 类型:热交换控制器 应用:通用型,PCI Express? 内部开关:无 电流限制:- 电源电压:3.3V,12V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:80-TQFP 供应商设备封装:80-TQFP(12x12) 包装:托盘 产品目录页面:1423 (CN2011-ZH PDF)
LTC4350CGN#TR 功能描述:IC CNTRLR HOTSWAP LOADSHAR16SSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:119 系列:- 类型:热交换控制器 应用:通用型,PCI Express? 内部开关:无 电流限制:- 电源电压:3.3V,12V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:80-TQFP 供应商设备封装:80-TQFP(12x12) 包装:托盘 产品目录页面:1423 (CN2011-ZH PDF)
LTC4350CGN#TRPBF 功能描述:IC CNTRLR HOTSWAP LOADSHAR16SSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:119 系列:- 类型:热交换控制器 应用:通用型,PCI Express? 内部开关:无 电流限制:- 电源电压:3.3V,12V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:80-TQFP 供应商设备封装:80-TQFP(12x12) 包装:托盘 产品目录页面:1423 (CN2011-ZH PDF)