- 您现在的位置：买卖IC网 > PDF目录67759 > LTC4416IMS#TR (LINEAR TECHNOLOGY CORP) 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10 PDF资料下载
参数资料
| 型号： | LTC4416IMS#TR |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 电源管理 |
| 英文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10 |
| 封装： | PLASTIC, MSOP-10 |
| 文件页数： | 8/12页 |
| 文件大小： | 209K |
| 代理商： | LTC4416IMS#TR |
LTC4416/LTC4416-1
4416fa
PI FU CTIO S
U
H1 (Pin 1): Open-Drain Comparator Output of the E1 Pin.
If E1 > VREF, the H1 pin will go high impedance, otherwise
the pin will be grounded. The maximum voltage permitted
on this pin is 7V. This pin provides support for setting up
hysterisis to an external resistor network.
E1 (Pin 2): LTC4416 Comparator Enable Input. A high
signal greater than VREF will enable the V1 path. The ideal
diode action will then determine if the V1 path should turn
on by controlling any PFET(s) connected to the G1 pin.
If the E1 signal is driven low, the V1 path will perform a
“soft-off” provided the PFET(s) are properly configured
for blocking DC current. An internal current sink will pull
the E1 pin down when the E1 input exceeds 1.5V.
E1 (Pin 2): LTC4416-1 Comparator Enable Input. A high
signal greater than VREF will enable the V1 path. The ideal
diode action will then determine if the V1 path should turn
on by controlling any PFET(s) connected to the G1 pin.
If the E1 signal is driven low, the V1 path will be quickly
disabled by enabling the “fast-off” feature, pulling the G1
gate high. An internal current sink will pull the E1 pin down
when the E1 input exceeds 1.5V.
GND (Pin 3): Ground. This pin provides a power return
path for all the internal circuits.
E2 (Pin 4): LTC4416 Comparator Enable Input. A low
signal less than VREF will enable the V2 path. The ideal
diode action will then determine if the V2 path should turn
on by controlling any PFET(s) connected to the G2 pin.
If the E2 signal is driven high, the V2 path will perform a
“soft-off” provided the PFET(s) are properly configured
for blocking DC current. An internal current sink will pull
the E2 pin down when the E2 input exceeds 1.5V.
E2 (Pin 4): LTC4416-1 Comparator Enable Input. A low
signal less than VREF will enable the V2 path. The ideal
diode action will then determine if the V2 path should turn
on by controlling any PFET(s) connected to the G2 pin.
If the E2 signal is driven high, the V2 path will be quickly
disabled by enabling the “fast-off” feature, pulling the G2
gate high. An internal current sink will pull the E2 pin down
when the E2 input exceeds 1.5V.
H2 (Pin 5): Open-Drain Comparator Output of the E2 Pin.
If E2 > VREF, the H2 pin will go high impedance, otherwise
the pin will be grounded. The maximum voltage permitted
on this pin is 7V. This pin provides support for setting up
hysterisis to an external resistor network.
G2 (Pin 6): Second P-Channel MOSFET Power Switch
Gate Drive Pin. This pin is directed by the second power
controller to maintain a forward regulation voltage (VFR)
of 25mV between the V2 and VS pins when V2 is greater
than VS. When V2 is less than VS, the G2 pin will pull up
to the VS pin voltage, turning off the second P-channel
power switch.
V2 (Pin 7): Second Input Supply Voltage. Supplies power
to the second power controller and the band-gap refer-
ence. V2 is one of the two voltage sense inputs to the
second internal power controller (the other input to the
second internal power controller is the VS pin). This input
is usually supplied power from the second, or backup,
power source. This pin can be bypassed to ground with
a capacitor in the range of 0.1F to 10F if needed to
suppress load transients.
VS (Pin 8): Power Sense Input Pin. Supplies power to
the internal circuitry of both the first and second power
controller and the band-gap reference. This pin is also a
voltage sense input to both internal analog controllers
(the other input to the first controller is the V1 pin and
the other input to the second controller is the V2 pin.)
This input may also be supplied power from an auxiliary
source which also supplies current to the load.
V1 (Pin 9): First Input Supply Voltage. Supplies power to
the first power controller and the band-gap reference. V1
is one of the two voltage sense inputs to the first internal
power controller (the other input to the first internal power
controller is the VS pin). This input is usually supplied
power from the first, or primary, power source. This pin
can be bypassed to ground with a capacitor in the range
of 0.1F to 10F if needed to suppress load transients.
G1 (Pin 10): First P-Channel MOSFET Power Switch Gate
Drive Pin. This pin is directed by the first power controller
to maintain a forward regulation voltage (VFR) of 25mV
between the V1 and VS pins when V1 is greater than VS.
When V1 is less than VS,theG1pinwillpulluptotheVSpin
voltage, turning off the first P-channel power switch.
相关PDF资料 |
PDF描述 |
|---|---|
| LTC6405CMS8E#TRPBF | SPECIALTY ANALOG CIRCUIT, PDSO8 |
| LTC6405IMS8E#TRPBF | SPECIALTY ANALOG CIRCUIT, PDSO8 |
| LTM4600HVEV | 17 A SWITCHING REGULATOR, 800 kHz SWITCHING FREQ-MAX, PBGA104 |
| LTM4600HVIV | 17 A SWITCHING REGULATOR, 800 kHz SWITCHING FREQ-MAX, PBGA104 |
| LV5103LP | SPECIALTY ANALOG CIRCUIT, QCC40 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4417CGN#PBF | 制造商:Linear Technology 功能描述:Prioritized PowerPath Controller 24-Pin SSOP N 制造商:Linear Technology 功能描述:IC OR CTRLR SRC SELECT 24SSOP 制造商:Linear Technology 功能描述:SEQUENCER TRIPLE SUPPLY 36V 制造商:Linear Technology 功能描述:PRIORITIZED POWER PATH CONTROLLER, SSOP-24; IC Function:Prioritized PowerPath Controller; Supply Voltage Min:2.5V; Supply Voltage Max:36V; Operating Temperature Min:0C; Operating Temperature Max:70C; Digital IC Case Style:SSOP ;RoHS Compliant: Yes |
| LTC4417CGN#TRPBF | 制造商:Linear Technology 功能描述:Prioritized PowerPath Controller 24-Pin SSOP N T/R 制造商:Linear Technology 功能描述:IC OR CTRLR SRC SELECT 24SSOP |
| LTC4417CUF#PBF | 制造商:Linear Technology 功能描述:Prioritized PowerPath Controller 24-Pin QFN EP 制造商:Linear Technology 功能描述:IC OR CTRLR SRC SELECT 24QFN 制造商:Linear Technology 功能描述:SEQUENCER TRIPLE SUPPLY 36V 制造商:Linear Technology 功能描述:PRIORITIZED POWER PATH CONTROLLER, QFN-24; IC Function:Prioritized PowerPath Controller; Supply Voltage Min:2.5V; Supply Voltage Max:36V; Operating Temperature Min:0C; Operating Temperature Max:70C; Digital IC Case Style:QFN ;RoHS Compliant: Yes |
| LTC4417CUF#TRPBF | 制造商:Linear Technology 功能描述:Prioritized PowerPath Controller 24-Pin QFN EP T/R 制造商:Linear Technology 功能描述:IC OR CTRLR SRC SELECT 24QFN |
| LTC4417HGN#PBF | 制造商:Linear Technology 功能描述:Prioritized PowerPath Controller 24-Pin SSOP N 制造商:Linear Technology 功能描述:IC OR CTRLR SRC SELECT 24SSOP 制造商:Linear Technology 功能描述:MS-Hot Swap/Low Voltage, 2.5V to 36V Prioritized Triple PowerPath Controller |
发布紧急采购，3分钟左右您将得到回复。