- 您现在的位置：买卖IC网 > PDF目录20336 > LTC4416IMS#TRPBF (Linear Technology)IC CNTRLR POWERPATH 10-MSOP PDF资料下载
参数资料
| 型号： | LTC4416IMS#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 7/12页 |
| 文件大小： | 0K |
| 描述： | IC CNTRLR POWERPATH 10-MSOP |
| 标准包装： | 2,500 |
| 系列： | PowerPath™ |
| 应用： | 电池备份，工业/汽车，大电流开关 |
| FET 型： | P 沟道 |
| 输出数： | 2 |
| 内部开关： | 无 |
| 延迟时间 - 开启： | 60µs |
| 延迟时间 - 关闭： | 30µs |
| 电源电压： | 3.6 V ~ 36 V |
| 电流 - 电源： | 130µA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-MSOP |
| 包装： | 带卷 (TR) |
LTC4416/LTC4416-1
OPERATIO
The band-gap reference provides internal bias currents
used by the channel 1 and channel 2 controllers. It also
provides a precision voltage reference, V REF , used by com-
parators C1 and C2. The band-gap reference is powered
as long as a minimum operational voltage is present on
either V1, V2, or V S .
The C1 and C2 comparators provide a fixed comparison
between the E1 and E2 inputs, respectively, and the in-
ternal V REF signal. The comparator outputs are directly
represented by the H1 and H2 open-drain outputs. The
output states of H1 and H2 are not dependent upon
the relative voltage difference between V V1 – V VS and
V V2 – V VS , respectively. If V E1 is less than V REF , the H1
open-drain output will be low impedance to GND. If V E2
is less than V REF , the H2 open-drain output will be low
impedance to GND.
The A1 and A2 circuits act both as a high side
transconductance amplifiers and as comparators. Both
A1 and A2 act identically when the analog controllers
are fully enabled. The relationship of the G1 current is
represented by Figure 1.
When V V1 – V VS < V RTO , the A1 activates the reverse turn-
off condition and the I G1 current is I G(OFF) . When V RTO <
V V1 – V VS < V FR , the A1 acts as a class A output and the
I G1 current is fixed at I G(SRC) . As the V V1 – V VS voltage
approaches the forward regulation voltage, V FR , the I G(SNK)
current will be proportional to V V1 – V VS . When V V1 – V VS
> V FON , the A1 activates the fast-on condition, t G(ON) , and
the I G1 current is set to I GFON(SNK) .
LTC4416 OPERATION
The interaction of the LTC4416 analog controllers distin-
guish the operation of the LTC4416 from a simple circuit
using two PowerPath controllers. Table 1 explains the
different operation modes of the analog controllers.
Table 1. LTC4416 Operational Modes
E1 E2 Operation Mode I G(OFF)1 I G(OFF)2
1 0 Load Sharing Enabled Enabled
1 Sense V1 is Less Than V2 Enabled
Sense 0 V1 is Greater Than V2 Enabled
0 X Channel 1 Disabled. Disabled
Do Not Use
X 1 Channel 2 Disabled. Disabled
Do Not Use
0 1 Both Channels Disabled Disabled Disabled
The LTC4416 has six modes of operation. Each mode of
operation is dependent upon the configuration of the E1
and E2 input pins.
Load Sharing Operation
I G1
I G(SNK)
I GFON(SNK)
The load sharing mode configures the LTC4416 into two
independent PowerPath controllers. This is accomplished
by fully enabling both the first analog controller and the
second analog controller. Both channels will implement
the gate drive outlined in Figure 1.
V1 is Less Than V2 Operation
I G(SRC)
V FR
I G(OFF)
V RTO
V FON
NOT DRAWN TO SCALE
Figure 1. I G1 vs V V1 – V VS
V V1 – V VS
4416 F01
Channel 1 is fully enabled. If V V1 – V VS < V RTO , channel 1
will implement all of the I G1 currents listed in Figure 1.
When V E2 is above the V REF threshold, channel 2 is in a
“soft-off mode”. This means that G2 will only provide an
I G(SRC) current instead of either an I G(SRC) or an I G(OFF)
current.
When V E2 is below the V REF threshold, channel 2 is fully
enabled, and G2 will become active implementing the I G
output current listed in Figure 1.
4416fa
相关PDF资料 |
PDF描述 |
|---|---|
| BPD2FF | TRANSFR WALL 120V TO 18VAC 1.11A |
| T95D107M016HSAL | CAP TANT 100UF 16V 20% 2917 |
| VI-J6K-CW-F3 | CONVERTER MOD DC/DC 40V 100W |
| RS2J-13 | RECT FAST RECOVERY 600V 1.5A SMB |
| T95D107K016HSAL | CAP TANT 100UF 16V 10% 2917 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4417CGN#PBF | 制造商:Linear Technology 功能描述:Prioritized PowerPath Controller 24-Pin SSOP N 制造商:Linear Technology 功能描述:IC OR CTRLR SRC SELECT 24SSOP 制造商:Linear Technology 功能描述:SEQUENCER TRIPLE SUPPLY 36V 制造商:Linear Technology 功能描述:PRIORITIZED POWER PATH CONTROLLER, SSOP-24; IC Function:Prioritized PowerPath Controller; Supply Voltage Min:2.5V; Supply Voltage Max:36V; Operating Temperature Min:0C; Operating Temperature Max:70C; Digital IC Case Style:SSOP ;RoHS Compliant: Yes |
| LTC4417CGN#TRPBF | 制造商:Linear Technology 功能描述:Prioritized PowerPath Controller 24-Pin SSOP N T/R 制造商:Linear Technology 功能描述:IC OR CTRLR SRC SELECT 24SSOP |
| LTC4417CUF#PBF | 制造商:Linear Technology 功能描述:Prioritized PowerPath Controller 24-Pin QFN EP 制造商:Linear Technology 功能描述:IC OR CTRLR SRC SELECT 24QFN 制造商:Linear Technology 功能描述:SEQUENCER TRIPLE SUPPLY 36V 制造商:Linear Technology 功能描述:PRIORITIZED POWER PATH CONTROLLER, QFN-24; IC Function:Prioritized PowerPath Controller; Supply Voltage Min:2.5V; Supply Voltage Max:36V; Operating Temperature Min:0C; Operating Temperature Max:70C; Digital IC Case Style:QFN ;RoHS Compliant: Yes |
| LTC4417CUF#TRPBF | 制造商:Linear Technology 功能描述:Prioritized PowerPath Controller 24-Pin QFN EP T/R 制造商:Linear Technology 功能描述:IC OR CTRLR SRC SELECT 24QFN |
| LTC4417HGN#PBF | 制造商:Linear Technology 功能描述:Prioritized PowerPath Controller 24-Pin SSOP N 制造商:Linear Technology 功能描述:IC OR CTRLR SRC SELECT 24SSOP 制造商:Linear Technology 功能描述:MS-Hot Swap/Low Voltage, 2.5V to 36V Prioritized Triple PowerPath Controller |
发布紧急采购，3分钟左右您将得到回复。