参数资料
| 型号： | LTC6244HVCDD#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 13/26页 |
| 文件大小： | 0K |
| 描述： | IC OP AMP DUAL R-R 8-DFN |
| 标准包装： | 2,500 |
| 放大器类型： | 通用 |
| 电路数： | 2 |
| 输出类型： | 满摆幅 |
| 转换速率： | 40 V/µs |
| 增益带宽积： | 50MHz |
| 电流 - 输入偏压： | 1pA |
| 电压 - 输入偏移： | 100µV |
| 电流 - 电源： | 7mA |
| 电流 - 输出 / 通道： | 55mA |
| 电压 - 电源，单路/双路(±)： | 2.8 V ~ 11 V，±1.4 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-WFDFN 裸露焊盘 |
| 供应商设备封装： | 8-DFN-EP（3x3） |
| 包装： | 带卷 (TR) |
LTC6244
20
6244fb
Figure 8b: Output Noise Spectrum of the Circuit in Figure 8a.
Noise at 1MHz is 782nV/√Hz, Due Mostly to the Input Current
Noise Rising with Frequency
Total capacitance at the amplier’s input is now one CCM
(2.1pF) plus the photodiode capacitance CPD (1.8pF), or
about 4pF accounting for parasitics. The shunt impedance
at 1MHz, for example, is XC = 1/(2πfC) = 39.8kΩ, and
therefore, the noise gain at 1MHz is NG = 1+Rf/XC = 26.
The input voltage noise of this amplier is about 15nV/√Hz,
after accounting for the effects of R1 through R3, the
noise of the second stage and the fact that voltage noise
does rise with frequency. Multiplying the noise gain by
the input voltage noise gives an output noise density due
to voltage noise of 26 15nV/√Hz = 390nV/√Hz. But the
noise spectral density plot of Figure 8b shows an output
noise of 782nV/√Hz at 1MHz. The extra output noise is
due to input current noise, multiplied by the feedback
impedance. So while the circuit of Figure 8a does increase
bandwidth, it does not offer a noise advantage. Note,
however, that the 1.2mVRMS of noise is now measured in
a 2MHz bandwidth, instead of over a 350kHz bandwidth
of the previous example.
A Low Noise Fully Differential Buffer/Amplier
In differential signal conditioning circuits, there is often a
need to monitor a differential source without loading or
adding appreciable noise to the circuit. In addition, add-
ing gain to low level signals over appreciable bandwidth
is extremely useful. A typical application for a low noise,
high impedance, differential amplier is in the baseband
circuit of an RFID (radio frequency identication) receiver.
The baseband signal of a UHF RFID receiver is typically a
low level differential signal at the output of a demodulator
with differential output impedance in the range of 100Ω to
400Ω. The bandwidth of this signal is 1MHz or less.
The circuit of Figure 9a uses an LTC6244 to make a low
noise fully differential amplier. The amplier’s gain, input
impedance and –3dB bandwidth can be specied indepen-
dently. Knowing the desired gain, input impedance and
–3dB bandwidth, RG, CF and CIN can be calculated from
the equations shown in Figure 9b. The common mode
gain of this amplier is equal to one (VOUTCM = VINCM)
and is independent of resistor matching. The component
values in the Figure 9a circuit implement a 970kHz, gain
= 5, differential amplier with 4k input impedance. The
output differential DC offset is typically less than 500μV.
The differential input referred noise voltage density is
shown in Figure 10. The total input referred noise in a
1MHz bandwidth is 16μVRMS.
APPLICATIONS INFORMATION
50k
1M
FREQUENCY (Hz)
6244 F08b
5M
OUTPUT
NOISE
(150nV/√
Hz
/DIV)
相关PDF资料 |
PDF描述 |
|---|---|
| LTC6247CTS8#TRPBF | IC OPAMP RRIO 180MHZ DL TSOT23-8 |
| LTC6253CTS8#TRPBF | IC OPAMP R-R 720MHZ TSOT23-8 |
| LTC6256IKC#TRMPBF | IC OP AMP RRIO DUAL 8UTDFN |
| LTC6410IUD-6#PBF | IC AMP DIFF IF 16-QFN |
| LTC6412CUF#TRPBF | IC VGA ANLG-CNTRL 31DB 24-QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC6244HVCMS8 | 制造商:Linear Technology 功能描述:OP Amp Dual GP R-R O/P ±5.25V/10.5V 8-Pin MSOP |
| LTC6244HVCMS8#PBF | 功能描述:IC OP AMP DUAL R-R 8-MSOP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 其它有关文件:Automotive Product Guide 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:3 V/µs 增益带宽积:10MHz -3db带宽:- 电流 - 输入偏压:1pA 电压 - 输入偏移:70µV 电流 - 电源:2.5mA 电流 - 输出 / 通道:48mA 电压 - 电源，单路/双路(±):2.7 V ~ 5.5 V，±1.35 V ~ 2.75 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-6 包装:Digi-Reel® 其它名称:MAX4475AUT#TG16DKR |
| LTC6244HVCMS8#TRPBF | 功能描述:IC OP AMP DUAL R-R 8-MSOP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 其它有关文件:Automotive Product Guide 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:3 V/µs 增益带宽积:10MHz -3db带宽:- 电流 - 输入偏压:1pA 电压 - 输入偏移:70µV 电流 - 电源:2.5mA 电流 - 输出 / 通道:48mA 电压 - 电源，单路/双路(±):2.7 V ~ 5.5 V，±1.35 V ~ 2.75 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-6 包装:Digi-Reel® 其它名称:MAX4475AUT#TG16DKR |
| LTC6244HVHDD#PBF | 功能描述:IC OPAMP CMOS R-R DUAL 8-DFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:1 系列:- 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.028 V/µs 增益带宽积:105kHz -3db带宽:- 电流 - 输入偏压:3nA 电压 - 输入偏移:100µV 电流 - 电源:3.3µA 电流 - 输出 / 通道:12mA 电压 - 电源，单路/双路(±):2.7 V ~ 12 V，±1.35 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:剪切带 (CT) 其它名称:OP481GRUZ-REELCT |
| LTC6244HVHDD#TRPBF | 功能描述:IC OPAMP CMOS R-R DUAL 8-DFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:73 系列:Over-The-Top® 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.07 V/µs 增益带宽积:200kHz -3db带宽:- 电流 - 输入偏压:1nA 电压 - 输入偏移:285µV 电流 - 电源:50µA 电流 - 输出 / 通道:25mA 电压 - 电源，单路/双路(±):2 V ~ 44 V，±1 V ~ 22 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-WFDFN 裸露焊盘 供应商设备封装:16-DFN-EP（5x3） 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。