参数资料
| 型号： | LTC6902IMS#TR |
| 厂商： | Linear Technology |
| 文件页数： | 14/16页 |
| 文件大小： | 0K |
| 描述： | IC OSC SILICON 20MHZ 10MSOP |
| 标准包装： | 2,500 |
| 类型： | 振荡器 - 硅 |
| 频率： | 100kHz ~ 20MHz |
| 电源电压： | 2.7 V ~ 5.5 V |
| 电流 - 电源： | 2.5mA |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 10-MSOP |
| 安装类型： | 表面贴装 |
LTC6902
7
6902f
or it should be surrounded by a ground shield to prevent
excessive coupling from other PCB traces.
OUT1, OUT2, OUT3, OUT4 (Pins 4, 5, 6 and 7): Oscillator
Outputs. These pins can drive 5k
and/or 10pF loads.
Larger loads may cause inaccuracies due to supply bounce
at high frequencies.
GND (Pin 8): Ground. Should be tied to a ground plane for
best performance.
SET (Pin 10): Frequency Setting Resistor Input. The value
of the resistor (RSET) connected between Pin 10 and V+
determines the oscillator frequency. The voltage on this
pin is held at approximately 1.13V below the V+ voltage.
For best performance, use a precision metal film resistor
with a value between 10k and 2M and limit the capacitance
on this pin to less than 10pF.
UU
U
PI FU CTIO S
MOD (Pin 9): Spread Spectrum Frequency Modulation
Setting Resistor Input. The value of the resistor (RMOD)
connected between Pin 9 and V+ determines the amount
of frequency modulation. The output frequency is always
modulated down from the frequency set by the RSET resis-
tor. For best performance, use a precision metal film resis-
tor with a value between 10k and 2M and limit the
capacitance on this pin to less than 10pF. The voltage on
this pin is not static. Limiting the capacitance on this pin
is important for the part to perform properly. To disable
the modulation, connect this pin to GND. Grounding the
MOD pin disables the modulation and shuts down the
modulation circuitry to save power. Leaving the pin open
to disable the modulation is not recommended. While
leaving the pin open, RMOD ≈ ∞, gives the mathematical
result of 0% modulation, the open pin is susceptible to
external noise coupling that can effect frequency accuracy.
BLOCK DIAGRA
W
–
+
–
+
1
10
9
ISET
MOD
8 GND
CURRENT MIRROR
IMASTER
ISET
G = 1
IMOD
VBIAS
V+ – VSET = 1.1V ±25%
MASTER OSCILLATOR
PROGRAMMABLE
DIVIDER
÷N
(N = 1, 10 OR 100)
÷3200
6902 BD
9-BIT PRBS
GENERATOR
VSET
REF
MULTIPLYING
DAC
7
MULTIPHASE
CIRCUIT
SELECTS BETWEEN
MULTIPHASE
OPTIONS AND
÷M
2-PHASE (M = 1)
3-PHASE (M = 3)
4-PHASE (M = 4)
IMOD
SET
V+
RSET
RMOD
+
–
IMASTER
(V+ – VSET)
fMASTER = 10MHz 20k
2
3
4
DIV
PH
OUT1
5
OUT2
6
OUT3
7
OUT4
相关PDF资料 |
PDF描述 |
|---|---|
| VE-B43-IU-F2 | CONVERTER MOD DC/DC 24V 200W |
| VE-B43-IU-F1 | CONVERTER MOD DC/DC 24V 200W |
| LTC1799HS5#TR | IC OSC SILICON 33MHZ TSOT23-5 |
| VE-B42-IU-F4 | CONVERTER MOD DC/DC 15V 200W |
| LTC1799HS5#TRM | IC OSC SILICON 33MHZ TSOT23-5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC6903 | 制造商:LINER 制造商全称:Linear Technology 功能描述:1kHz to 68MHz Serial Port Programmable Oscillator |
| LTC6903_12 | 制造商:LINER 制造商全称:Linear Technology 功能描述:1kHz to 68MHz Serial Port Programmable Oscillator |
| LTC6903CMS8 | 功能描述:IC OSC SILICON 68MHZ 8-MSOP RoHS:否 类别:集成电路 (IC) >> 时钟/计时 - 可编程计时器和振荡器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:45 系列:- 类型:温度 - 补偿晶体振荡器（TCXO） 计数:- 频率:25MHz 电源电压:3.135 V ~ 3.465 V 电流 - 电源:1.5mA 工作温度:-40°C ~ 85°C 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 包装:管件 供应商设备封装:16-SOIC W 安装类型:表面贴装 |
| LTC6903CMS8#PBF | 功能描述:IC OSC SILICON 68MHZ 8-MSOP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 可编程计时器和振荡器 系列:- 标准包装:3,000 系列:- 类型:振荡器 - 晶体 计数:- 频率:- 电源电压:2.3 V ~ 5.5 V 电流 - 电源:1.07mA 工作温度:-30°C ~ 80°C 封装/外壳:SOT-665 包装:带卷 (TR) 供应商设备封装:SS迷你型-5D 安装类型:表面贴装 其它名称:AN8955SSMTXLTR |
| LTC6903CMS8#PBF | 制造商:Linear Technology 功能描述:Programmable Oscillator IC |
发布紧急采购，3分钟左右您将得到回复。