- 您现在的位置：买卖IC网 > PDF目录79693 > LTC6909IMS#PBF (LINEAR TECHNOLOGY CORP) SPECIALTY ANALOG CIRCUIT, PDSO16 PDF资料下载
参数资料
| 型号： | LTC6909IMS#PBF |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 模拟信号调理 |
| 英文描述： | SPECIALTY ANALOG CIRCUIT, PDSO16 |
| 封装： | LEAD FREE, PLASTIC, MSOP-16 |
| 文件页数： | 8/22页 |
| 文件大小： | 0K |
| 代理商： | LTC6909IMS#PBF |
LTC6909
16
6909fa
ApplicAtions inForMAtion
high impedance) and 001 (all outputs are low) are useful
for controlling the clocking of switching regulators during
start-up. At start-up, most switching regulators ignore the
clock input until a power good state is achieved. Nearly
all of Linear Technology’s switching regulators operate in
this manner. However, some switching regulators from
other vendors do not ignore the clock input on start-up
and yet are not synchronizable until the power good state
is reached. Attempting to synchronize these switching
regulators before they reach the power good state can
lead to problems. For these switching regulators it is best
to have the LTC6909 held in the PH0-PH1-PH2 codes
000 or 001 until the switching regulator issues a power
good signal. In most cases, simply connecting a switch-
ing regulator’s power good signal to the PH0, PH1 and/
or PH2 pins accomplishes this. At most, an additional
single logic inverter is required to switch from either the
000 or 001 states to any of the other six states through
a power good signal.
Another way to use the PH0, PH1 and PH2 inputs to as-
sist with power-up/down issues is to use an external part
to provide a supply monitor or an undervoltage lockout
(UVLO). There are several parts available that combine a
comparator with a reference to fulfill this function. The
LTC6909 does not have its own internal UVLO. If the
supply is below 2.7V, frequency accuracy may suffer. At
a supply voltage around 2V or lower, the LTC6909 will
operate erratically or will stop. It may stop randomly in a
logic high or low state.
Figure 8 shows a circuit using an LTC1998 to monitor the
supply voltage and control the logic state of the PH0 and
PH1 pins. The LTC1998’s threshold is set at 2.5V with
50mV of hysteresis. On power-up, as the supply ramps
up, the LTC1998 holds PH0 and PH1 low, keeping the
LTC6909’s outputs in a high impedance state. Once the
supply is above 2.55V, the LTC1998 pulls the PH0 and PH1
pins high, setting the LTC6909 into the 4-phase operating
mode. On power-down, the supply ramps down and the
LTC1998’soutputgoeslowoncethesupplyisbelow2.45V.
This puts the LTC6909’s outputs in the high impedance
state. All switch overs are synchronized to the LTC6909’s
internal oscillator to avoid glitches and runt pulses.
To adjust the on/off supply voltage threshold, change the
configuration of the LTC1998. As with the power good
signal,atmostanadditionalsinglelogicinverterisrequired
to switch from either the 000 or 001 states to any of the
other six states.
Figure 8. Adding a UVLO Feature to the LTC6909. In This Example, the LTC6909 Is in 4-Phase Mode
for a V+ > ≈2.5V (PHx = 011) and the Outputs Are All High Impedance for V+ < ≈2.5V (PHx = 000)
LTC1998
V+
BATT
GND
VTHA
953k
49.9k
6909 F08
RSET
6
5
4
BATTLO
VLOGIC
VHA
0.1F
1
2
3
LTC6909
V+A
GND
PH0
PH1
OUT1
OUT2
OUT3
OUT4
16
15
14
13
12
11
10
9
SET
PH2
MOD
V+D
OUT8
OUT7
OUT6
OUT5
1
2
3
4
5
6
7
8
相关PDF资料 |
PDF描述 |
|---|---|
| LSM-1/16-W3 | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| LM9140AXM-4.1 | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 4.096 V, PDSO8 |
| LMD9D | 2-OUTPUT 65 W DC-DC REG PWR SUPPLY MODULE |
| LES010ZE-3N | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| LT1009CDG4 | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 2.5 V, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC6909IMS-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:1 to 8 Output, Multiphase Silicon Oscillator with Spread Spectrum Modulation |
| LTC690C | 制造商:LINER 制造商全称:Linear Technology 功能描述:Microprocessor Supervisory Circuits |
| LTC690CN8 | 功能描述:IC MPU SUPERVISORY CIRCUIT 8-DIP RoHS:否 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 标准包装:1 系列:- 类型:简单复位/加电复位 监视电压数目:1 输出:开路漏极或开路集电极 复位:高有效 复位超时:- 电压 - 阀值:1.8V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:6-TSOP（0.059"，1.50mm 宽）5 引线 供应商设备封装:5-TSOP 包装:剪切带 (CT) 其它名称:NCP301HSN18T1GOSCT |
| LTC690CN8#PBF | 功能描述:IC MPU SUPERVISORY CIRCUIT 8-DIP RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 其它有关文件:STM6905 View All Specifications 标准包装:1 系列:- 类型:多压监控器 监视电压数目:5 输出:开路漏极或开路集电极 复位:低有效 复位超时:最小为 140 ms 电压 - 阀值:2.188V，2.955V，可调，可调，可调 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-TSSOP 包装:Digi-Reel® 产品目录页面:1197 (CN2011-ZH PDF) 其它名称:497-8728-6 |
| LTC690CN8PBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Microprocessor Supervisory Circuits |
发布紧急采购，3分钟左右您将得到回复。