参数资料
| 型号： | LTC6994IDCB-2#TRMPBF |
| 厂商： | Linear Technology |
| 文件页数： | 9/26页 |
| 文件大小： | 0K |
| 描述： | IC DELAY LINE 6-DFN |
| 产品培训模块： | TimerBlox Family Timing Devices |
| 特色产品： | TimerBlox? |
| 标准包装： | 500 |
| 系列： | TimerBlox® |
| 功能： | 可编程 |
| 可用的总延迟： | 1µs ~ 33.6s |
| 独立延迟数： | 1 |
| 电源电压： | 2.25 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-WFDFN 裸露焊盘 |
| 供应商设备封装： | 6-DFN-EP（2x3） |
| 包装： | 带卷 (TR) |
| 配用： | DC1562A-E-ND - BOARD EVAL LTC6992-3 |
LTC6994-1/LTC6994-2
17
699412fb
applicaTions inForMaTion
Voltage-Controlled Delay
With one additional resistor, the LTC6994 output delay
can be manipulated by an external voltage. As shown in
Figure 10, voltage VCTRL sources/sinks a current through
RMOD to vary the ISET current, which in turn modulates
the delay as described in Equation (3):
tDELAY =
NDIV RMOD
50k
1s
1
+
RMOD
RSET
–
VCTRL
VSET
(3)
Digital Delay Control
The control voltage can be generated by a DAC (digital-to-
analog converter), resulting in a digitally-controlled delay.
Many DACs allow for the use of an external reference. If
such a DAC is used to provide the VCTRL voltage, the VSET
dependency can be eliminated by buffering VSETandusing
it as the DAC’s reference voltage, as shown in Figure 11.
The DAC’s output voltage now tracks any VSET variation
and eliminates it as an error source. The SET pin cannot be
tied directly to the reference input of the DAC because the
currentdrawnbytheDAC’sREFinputwouldaffectthedelay.
ISET Extremes (Master Oscillator Frequency Extremes)
When operating with ISET outside of the recommended
1.25A to 20A range, the master oscillator operates
outside of the 62.5kHz to 1MHz range in which it is most
accurate.
The oscillator will still function with reduced accuracy for
ISET < 1.25A. At approximately 500nA, the oscillator will
stop. Under this condition, the delay timing can still be
initiated, but will not terminate until ISET increases and
the master oscillator starts again.
At the other extreme, it is not recommended to operate
the master oscillator beyond 2MHz because the accuracy
of the DIV pin ADC will suffer.
LTC6994
IN
GND
SET
OUT
V+
DIV
R1
C1
0.1F
699412 F10
V+
R2
RSET
RMOD
VCTRL
699412 F11
LTC6994
IN
GND
SET
OUT
V+
DIV
C1
0.1F
R1
R2
V+
RMOD
RSET
–
+
V+
1/2
LTC6078
LTC1659
V+
0.1F
VCC
REF
GND
VOUT
P
DIN
CLK
CS/LD
NDIV RMOD
50k
tDELAY =
DIN = 0 TO 4095
–
1+
RMOD
RSET
DIN
4096
1s
0.1F
Figure 10. Voltage-Controlled Delay
Figure 11. Digitally Controlled Delay
相关PDF资料 |
PDF描述 |
|---|---|
| VI-BNB-IU-F3 | CONVERTER MOD DC/DC 95V 200W |
| AD8400ARZ1-REEL | IC POT DGTL 8BIT SGL 1K 8SOIC |
| MS27508E22A21SA | CONN RCPT 21POS BOX MNT W/SCKT |
| MS27474T24F35P | CONN RCPT 128POS JAM NUT W/PINS |
| MS27466P23A35SA | CONN RCPT 100POS WALL MNT W/SCKT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC6994IS6-1#PBF | 制造商:Linear Technology 功能描述:Programmable Delay Block 6-Pin TSOT-23 制造商:Linear Technology 功能描述:SC-Timing, Cut Tape Delay with Rising or Falling Edge Trigger |
| LTC6994IS6-1#TRMPBF | 功能描述:IC DELAY LINE TSOT-23-6 RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 延迟线 系列:TimerBlox® 标准包装:2,500 系列:- 标片/步级数:- 功能:多个，不可编程 延迟到第一抽头:10ns 接头增量:- 可用的总延迟:10ns 独立延迟数:4 电源电压:4.75 V ~ 5.25 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-SOIC（0.154"，3.90mm 宽） 供应商设备封装:14-SOIC 包装:带卷 (TR) |
| LTC6994IS6-1#TRPBF | 功能描述:IC DELAY LINE TSOT-23-6 RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 延迟线 系列:TimerBlox® 标准包装:2,500 系列:- 标片/步级数:- 功能:多个，不可编程 延迟到第一抽头:10ns 接头增量:- 可用的总延迟:10ns 独立延迟数:4 电源电压:4.75 V ~ 5.25 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-SOIC（0.154"，3.90mm 宽） 供应商设备封装:14-SOIC 包装:带卷 (TR) |
| LTC6994IS6-1TRMPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:TimerBlox: Delay Block/ Debouncer |
| LTC6994IS6-2#PBF | 制造商:Linear Technology 功能描述:Programmable Delay Block 6-Pin TSOT-23 制造商:Linear Technology 功能描述:SC-Timing, Cut Tape Delay with Rising and Falling Edge Trigger |
发布紧急采购，3分钟左右您将得到回复。