参数资料
型号: LTM8023MPV#PBF
厂商: Linear Technology
文件页数: 7/24页
文件大小: 0K
描述: IC BUCK SYNC ADJ 2A 50LGA
产品培训模块: LTM802x High Voltage μModule Switching Regulators
Wide Temperature DC/DC Converter µModules
High Voltage µModule DC/DC Regulators
Power Module vs. Discrete DC to DC
软件下载: LTM8023 Spice Model
产品目录绘图: LTM8022-8023
设计资源: LTM8023MPV#PBF Footprint.bxl
特色产品: μModule Products
标准包装: 210
系列: µModule®
类型: 非隔离(POL)
输出数: 1
电压 - 输入(最小): 3.6V
电压 - 输入(最大): 36V
Voltage - Output 1: 0.8 ~ 10 V
电流 - 输出(最大): 2A
安装类型: 表面贴装
封装/外壳: 50-BLGA
尺寸/尺寸: 0.44" L x 0.35" W x 0.11" H(11.3mm x 9.0mm x 2.8mm)
包装: 托盘
工作温度: -55°C ~ 125°C
产品目录页面: 2711 (CN2011-ZH PDF)
配用: DC1195A-ND - BOARD DEMO LTM8023

LTM8023
PIN FUNCTIONS
V IN (Bank 1): The V IN pin supplies current to the LTM8023’s
internal regulator and to the internal power switch. This
pin must be locally bypassed with an external, low ESR
capacitor of at least 2.2μF.
V OUT (Bank 2): Power Output Pins. Apply the output filter
capacitor and the output load between these pins and
GND pins.
AUX (Pin F5): Low Current Voltage Source for BIAS. The
V AUX pin is internally connected to V OUT and is placed
adjacent to the BIAS pin to ease printed circuit board
routing. Although this pin is internally connected to V OUT ,
do NOT connect this pin to the load. If this pin is not tied
to BIAS, leave it floating.
BIAS (Pin G5): The BIAS pin connects to the internal power
bus. Connect to a power source greater than 2.8V. If the
output is greater than 2.8V, connect this pin there. If the
output voltage is less, connect this to a voltage source
between 2.8V and 16V. Also, make sure that BIAS + V IN
is less than 56V.
RUN/SS (Pin H5): Tie RUN/SS pin to ground to shut down
the LTM8023. Tie to 2.5V or more for normal operation.
If the shutdown feature is not used, tie this pin to the V IN
pin. RUN/SS also provides a soft-start function; see the
Applications Information section.
GND (Bank 3): Tie these GND pins to a local ground plane
below the LTM8023 and the circuit components. In most
applications, the bulk of the heat flow out of the LTM8023
is through these pads, so the printed circuit design has a
large impact on the thermal performance of the part. See
the PCB Layout and Thermal Consideration sections for
more details. Return the feedback divider (R ADJ ) to this net.
R T (Pin G7): The R T pin is used to program the switching
frequency of the LTM8023 by connecting a resistor from
this pin to ground. The Applications Information section of
the data sheet includes a table to determine the resistance
value based on the desired switching frequency. Minimize
capacitance at this pin.
SHARE (Pin F7): Tie this to the SHARE pin of another
LTM8023 when paralleling the outputs. Otherwise, do not
connect (leave floating).
SYNC (Pin G6): This is the external clock synchronization
input. Ground this pin for low ripple Burst Mode ? operation
at low output loads. Tie to a stable voltage source greater
than 0.7V to disable Burst Mode operation. Do not leave
this pin floating. Tie to a clock source for synchronization.
Clock edges should have rise and fall times faster than 1μs.
See synchronizing section in Applications Information.
PGOOD (Pin H6): The PGOOD pin is the open-collector
output of an internal comparator. PG remains low until
the ADJ pin is within 10% of the final regulation voltage.
PG output is valid when V IN is above 3.6V and RUN/SS is
high. If this function is not used, leave this pin floating.
ADJ (Pin H7): The LTM8023 regulates its ADJ pin to 0.79V.
Connect the adjust resistor from this pin to ground. The
value of R ADJ is given by the equation R ADJ = 394.21/
(V OUT – 0.79), where R ADJ is in kΩ.
8023fi
For more information www.linear.com/LTM8023
7
相关PDF资料
PDF描述
LTM8025MPV#PBF IC CONVERTER BUCK 3A ADJ 70LGA
LTM8026MPV#PBF IC UMODULE 36VIN 5A CVCC 81LGA
LTM8027EV#PBF IC BUCK SYNC ADJ 4A 113LGA
LTM8032MPY#PBF IC DC/DC UMODULE 2A 71BGA
LTM8033MPV#PBF IC DC-DC UMODULE BUCK 3A 76-LGA
相关代理商/技术参数
参数描述
LTM8023MPY#PBF 功能描述:IC DC/DC UMODULE 2A 50BGA RoHS:是 类别:电源 - 板载 >> DC DC Converters 系列:µModule® 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入(最小):66V 电压 - 输入(最大):160V Voltage - Output 1:12V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出(最大):* 电源(瓦) - 制造商系列:50W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9-FinMod 尺寸/尺寸:4.60" L x 1.86" W x 0.79" H(116.8mm x 47.2mm x 20.1mm) 包装:散装 工作温度:-25°C ~ 85°C 效率:* 电源(瓦特)- 最大:*
LTM8023V 制造商:LINER 制造商全称:Linear Technology 功能描述:2A, 36V DC/DC μModule
LTM8025 制造商:LINER 制造商全称:Linear Technology 功能描述:36V, 3A Step-Down μModule Converter
LTM8025EV 制造商:LINER 制造商全称:Linear Technology 功能描述:36V, 3A Step-Down μModule Converter
LTM8025EV#PBF 功能描述:IC CONVERTER BUCK 3A ADJ 70LGA RoHS:是 类别:电源 - 板载 >> DC DC Converters 系列:µModule® 特色产品:VYB Series High Efficiency Converters 3D 型号:VYB15W-Q48-S15 标准包装:63 系列:V-Infinity VYB15W 类型:隔离 输出数:1 电压 - 输入(最小):18V 电压 - 输入(最大):75V Voltage - Output 1:15V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出(最大):1A 电源(瓦) - 制造商系列:15W 电压 - 隔离:1.5kV(1500V) 特点:具有远程开/关功能和 UVLO 安装类型:通孔 封装/外壳:6-DIP 模块 尺寸/尺寸:2.00" L x 1.00" W x 0.44" H(50.8mm x 25.4mm x 11.3mm) 包装:管件 工作温度:-40°C ~ 85°C 效率:85% 电源(瓦特)- 最大:15W 其它名称:102-2329656-91325R