- 您现在的位置：买卖IC网 > Datasheet目录868 > LTM8033MPV#PBF (Linear Technology)IC DC-DC UMODULE BUCK 3A 76-LGA Datasheet资料下载
参数资料
| 型号： | LTM8033MPV#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 11/26页 |
| 文件大小： | 0K |
| 描述： | IC DC-DC UMODULE BUCK 3A 76-LGA |
| 产品培训模块： | Power Module vs. Discrete DC to DC µModule® Family of EN55022 Class B Certified Regulators |
| 软件下载： | LTM8033 Spice Model |
| 产品目录绘图： | LTM8033 |
| 设计资源： | DC1623A Design Files LTM8033MPV#PBF Footprint.bxl |
| 特色产品： | μModule Products |
| 标准包装： | 119 |
| 系列： | µModule® |
| 类型： | 非隔离（POL） |
| 输出数： | 1 |
| 电压 - 输入（最小）： | 3.6V |
| 电压 - 输入（最大）： | 36V |
| Voltage - Output 1： | 0.8 ~ 24 V |
| 电流 - 输出（最大）： | 3A |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 76-LGA |
| 尺寸/尺寸： | 0.59" L x 0.44" W x 0.17" H（15.0mm x 11.3mm x 4.3mm） |
| 包装： | 带卷 (TR) |
| 工作温度： | -55°C ~ 125°C |
| 产品目录页面： | 2711 (CN2011-ZH PDF) |
LTM8033
APPLICATIONS INFORMATION
For most applications, the design process is straight for-
ward, summarized as follows:
? Look at Table 1 and find the row that has the desired
input range and output voltage.
? Apply the recommended C IN , C FIN , C OUT , R ADJ and R T
values.
? Connect BIAS as indicated.
As the integrated input EMI filter may ring in response to
an application of a step input voltage, a bulk capacitance
may be applied between FIN and GND. See the Hot-Plug-
ging Safely section for details.
While these component combinations have been tested
for proper operation, it is incumbent upon the user to
verify proper operation over the intended system’s line,
load and environmental conditions. Bear in mind that the
maximum output current is limited by junction tempera-
ture, the relationship between the input and output voltage
magnitude and polarity and other factors. Please refer to
the graphs in the Typical Performance Characteristics
section for guidance.
The maximum frequency (and attendant R T value) at
which the LTM8033 should be allowed to switch is given
in Table 1 in the f MAX column, while the recommended
frequency (and R T value) for optimal efficiency over the
given input condition is given in the f OPTIMAL column.
There are additional conditions that must be satisfied if
the synchronization function is used. Please refer to the
Synchronization section for details.
Note: An input bulk capacitance is required at either V IN
or FIN. Refer to the Typical Performance Characteristics
section for load conditions.
Capacitor Selection Considerations
The C IN , C FIN and C OUT capacitor values in Table 1 are the
minimum recommended values for the associated oper-
ating conditions. Applying capacitor values below those
indicated in Table 1 is not recommended, and may result
in undesirable operation. Using larger values is generally
acceptable, and can yield improved dynamic response, if
it is necessary. Again, it is incumbent upon the user to
verify proper operation over the intended system’s line,
load and environmental conditions.
Ceramic capacitors are small, robust and have very low
ESR. However, not all ceramic capacitors are suitable.
X5R and X7R types are stable over temperature and ap-
plied voltage and give dependable service. Other types,
including Y5V and Z5U have very large temperature and
voltage coefficients of capacitance. In an application cir-
cuit they may have only a small fraction of their nominal
capacitance resulting in much higher output voltage ripple
than expected.
Ceramic capacitors are also piezoelectric. In Burst Mode
operation, the LTM8033’s switching frequency depends
on the load current, and can excite a ceramic capacitor
at audio frequencies, generating audible noise. Since the
LTM8033 operates at a lower current limit during Burst
Mode operation, the noise is typically very quiet to a
casual ear.
If this audible noise is unacceptable, use a high perfor-
mance electrolytic capacitor at the output. It may also be
a parallel combination of a ceramic capacitor and a low
cost electrolytic capacitor.
A final precaution regarding ceramic capacitors concerns
the maximum input voltage rating of the LTM8033. A
ceramic input capacitor combined with trace or cable
inductance forms a high Q (under damped) tank circuit.
If the LTM8033 circuit is plugged into a live supply, the
input voltage can ring to twice its nominal value, possibly
exceeding the device’s rating. This situation can be easily
avoided; see the Hot-Plugging Safely section.
8033fa
For more information www.linear.com/LTM8033
11
相关PDF资料 |
PDF描述 |
|---|---|
| LTM8040IV#PBF | IC LED DRVR HP CONST CURR 66-LGA |
| LTM8042IV#PBF | IC UMODULE LED DRIVER 56LGA |
| LTM8048MPY#PBF | IC DC/DC UMODULE LDO BGA |
| LTM8052AEV#PBF | IC UMODULE 36VIN 5A CVCC 81LGA |
| M30R224K5 | CAP CER 0.22UF 50V 10% RADIAL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTM8040 | 制造商:LINER 制造商全称:Linear Technology 功能描述:36V, 1A μModule LED Driver |
| LTM8040EV#PBF | 功能描述:IC LED DRVR HP CONST CURR 66-LGA RoHS:是 类别:电源 - 板载 >> LED 驱动器 - 恒定电流 系列:µModule® 产品目录绘图:4015, 7021 Series 标准包装:25 系列:7021 BuckPlus 输入电压:5 ~ 32V 输出电压:2.5 ~ 29.5V 电流 - 输出:700mA 功率（瓦特）:22.4W 安装类型:通孔 端接类型:PCB 引脚 尺寸/尺寸:0.83" L x 0.83" W x 0.43" H（21.1mm x 21.1mm x 10.9mm） 工作温度:-40°C ~ 80°C 类型:降压，带调光 批准:- 其它名称:788-1018 |
| LTM8040EV-PBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:36V, 1A μModule LED Driver |
| LTM8040IV#PBF | 功能描述:IC LED DRVR HP CONST CURR 66-LGA RoHS:是 类别:电源 - 板载 >> LED 驱动器 - 恒定电流 系列:µModule® 产品目录绘图:4015, 7021 Series 标准包装:25 系列:7021 BuckPlus 输入电压:5 ~ 32V 输出电压:2.5 ~ 29.5V 电流 - 输出:700mA 功率（瓦特）:22.4W 安装类型:通孔 端接类型:PCB 引脚 尺寸/尺寸:0.83" L x 0.83" W x 0.43" H（21.1mm x 21.1mm x 10.9mm） 工作温度:-40°C ~ 80°C 类型:降压，带调光 批准:- 其它名称:788-1018 |
| LTM8040IV#PBF | 制造商:Linear Technology 功能描述:DC/DC MICRO MODULE IC |
发布紧急采购，3分钟左右您将得到回复。