Ordering number : ENA1558
Bi-CMOS IC
LV5810M
Step-down Switching Regulator
Overview
LV5810M is a 1ch step-down switching regulator. 0.13
Ω FET is incorporated on the upper side to achieve high-efficiency
operation for large output current. Low-heat resistance and compact-package MFP8 (225mil) employed. Current mode
control type, with superior load current response and easy phase compensation ON/OFF pin, allowing the standby mode
with the current drain of 100
μA or less Pulse-by-pulse over-current protection and overheat protection available for
protection of load devices Soft start pin to be provided with a capacitance for soft start.
Functions
2A 1ch step-down switching regulator
Thermal shutdown
Wide input dynamic range ( to 28V)
Reference voltage: 0.8V
High efficiency (90% IOUT = 1A, VIN = 12V, VO = 5V)
Fixed frequency: 370kHz
Standby mode
Soft start
Over-current protection
Compact package: MFP8 (225mil)
Specifications
Maximum Ratings at Ta = 25
°C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum input VIN voltage
VIN max
32
V
BOOT pin maximum voltage
VBT max
37
V
SW pin maximum voltage
VSW max
VIN max
V
BOOT pin-SW pin maximum voltage
VBS-SW max
7
V
FB, COMP, SS pin maximum voltage
Vfs max
7
V
Allowable power dissipation
Pd max
Mount on a specified board *
1.15
W
Junction temperature
Tj max
150
°C
Operating temperature
Topr
-20 to 80
°C
Storage temperature
Tstg
-40 to 150
°C
* Specified board: 46.4mm
× 31.8mm ×1.7mm, glass epoxy both side.
Note: Plan the maximum voltage while including coil and surge voltages, so that the maximum voltage is not exceeded even for an instant.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer
's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
'sproductsor
equipment.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
91609 SY 20090904-S00003 No.A1558-1/5