参数资料
型号: LV59001M
厂商: SANYO SEMICONDUCTOR CO LTD
元件分类: 电源管理
英文描述: 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
封装: 0.200 INCH, MFP-8
文件页数: 7/7页
文件大小: 344K
代理商: LV59001M
LV59001M
PS No.A1973-7/7
VIN1 and VIN2
The dropout voltage can be lowered by making VIN1 and VIN2 another power supply within a some current range.
Refer to Figure 1.
1.5
0
0.5
1.0
Vdrop max -- IO
300
0
600
900
1200
1000
530
(1)
(2)
Maximum
dropout
voltage,
Vdrop
max
--
V
Output current, IO -- mA
(1) VIN1 and VIN2 are connected.
(2) VIN1 and VIN2 are another power supplies.
(VIN2=3V)
0.6
0.4
Figure 1
VIN1 and VIN2 voltage when setting it to 0.8V≤VO≤1.2V
This IC provides for the lowest operation voltage in VIN1 and VIN2 when VO is provided within the range of
0.8V≤VO≤1.2V though is possible the VO output setting even as for 0.8V to 3.5V. Please refer to an electric
specification.
This catalog provides information as of September, 2011. Specifications and information herein are subject
to change without notice.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
相关PDF资料
PDF描述
LV59025M 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
LV8549M STEPPER MOTOR CONTROLLER, PDSO10
M115-8 1000 MHz, OTHER CLOCK GENERATOR, DIP24
M115-8 1000 MHz, OTHER CLOCK GENERATOR, DIP24
M115-5 335 MHz, OTHER CLOCK GENERATOR, DIP24
相关代理商/技术参数
参数描述
LV59001MC-AH 制造商:ON Semiconductor 功能描述:6VADJUSTABLE OUT LINEAR - Tape and Reel
LV59001M-MPB-H 制造商:ON Semiconductor 功能描述:LINEAR REGULATOR - Ammo Pack
LV59001M-TLM-H 制造商:ON Semiconductor 功能描述:LINEAR REGULATOR - Tape and Reel
LV59012M 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:1.2V Constant-Voltage Power Supply IC
LV59012M_10 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:1.2V Constant-Voltage Power Supply IC