参数资料
| 型号： | LVR055S-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/2页 |
| 文件大小： | 0K |
| 描述： | POLYSWITCH PTC RESET .55A 25.4MM |
| 产品培训模块： | Circuit Protection Products |
| 标准包装： | 2,000 |
| 系列： | PolySwitch® |
| 电流 - 维持(Ih)： | 550mA |
| 电流 - 跳闸(It)： | 1.25A |
| 电流 - 最大： | 7A |
| 电压 - 最大： | 240V |
| R最小/最大： | 0.450 ~ 0.730 欧姆 |
| 跳闸时间： | 26s |
| 封装/外壳： | 径向 |
| 包装： | 散装 |
| 其它名称： | RF0233-000 |
PolySwitch?
PTC Devices
Overcurrent Protection Device
PRODUCT: LVR055S-1
DOCUMENT: SCD26532
REV LETTER: E
REV DATE: JULY 11, 2013
PAGE NO.: 2 OF 2
Warning: Application Limitations for the LVR Product Line
1. Users should independently evaluate the suitability of and test each product selected for their
own application.
2. This product should not be used in an application where the maximum interrupt voltage or
maximum interrupt current can be exceeded in a fault condition. Operation beyond the
maximum ratings or improper use may result in device damage and possible electrical arcing
and flame.
3. A PPTC device is not a fuse - it is a nonlinear thermistor that limits current. Under a fault
condition all PPTC devices go into a high resistance state but do not open circuit, so
hazardous voltage may be present at PPTC locations.
4. The devices are intended for protection against occasional overcurrent or overtemperature
fault conditions and should not be used when repeated fault conditions or prolonged trip events
are anticipated.
5. In most applications, power must be removed and the fault condition cleared in order to reset a
PPTC device; however, under certain unusual conditions, a PPTC device may automatically
reset. PPTC devices should not be used in an application where an automatic reset could
create a safety hazard, such as garbage disposals and blenders. Appropriate qualification
testing should be performed.
6. It is the responsibility of the user to determine the need for back up or fail safe protection to
prevent damage that may occur in the event of abnormal function or failure of the PTC device.
7. Operation in circuits with a large inductance can generate a circuit voltage (Ldi/dt) above the
rated voltage of a PPTC device. This product should not be used in an application where the
maximum interrupt voltage or maximum interrupt current can be exceeded by inductive spikes.
8. Devices are not recommended for reflow soldering.
9. Device performance can be impacted negatively if devices are handled in a manner
inconsistent with recommended electronic, thermal, or mechanical procedures for electronic
components.
10. PTC devices are not recommended to be installed in applications where the device is
constrained such that its PTC properties are inhibited, for example in rigid potting materials or
in rigid housings, which lack adequate clearance to accommodate device expansion.
11. Contamination of the PTC material with certain silicone-based oils or some aggressive
solvents can adversely impact the performance of the devices.
? 2006, 2013 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All rights reserved.
相关PDF资料 |
PDF描述 |
|---|---|
| LVR055S | POLYSWITCH PTC RESET 0.55A HOLD |
| LVRL125S | POLYSWITCH PTC RESET 120V 1.25A |
| LXP-LIGHTENGINE-B | LED LIGHT ENGINE BLUE |
| LXP-LIGHTENGINE-G | LED LIGHT ENGINE GREEN |
| LXP-LIGHTENGINE-R | LED LIGHT ENGINE RED |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LVR055S-2 | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:PolySwitch Resettable Devices Line-Voltage-Rated Devices |
| LVR056L000FE12 | 制造商:Vishay Dale 功能描述:RES METAL STRP 6M OHM 1% 5W AXL TH - Bulk |
| LVR056L000FE73 | 制造商:Vishay Dale 功能描述:RES METAL STRP 6M OHM 1% 5W AXL TH - Tape and Reel |
| LVR056L000JE12 | 制造商:Vishay Dale 功能描述:RES METAL STRP 6M OHM 5% 5W AXL TH - Bulk |
| LVR056L000JE73 | 制造商:Vishay Dale 功能描述:RES METAL STRP 6M OHM 5% 5W AXL TH - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。