参数资料
型号: LW020A7631
元件分类: 电源模块
英文描述: 1-OUTPUT 20 W DC-DC REG PWR SUPPLY MODULE
文件页数: 3/16页
文件大小: 341K
代理商: LW020A7631
Lucent Technologies Inc.
11
Data Sheet
January 2000
36 Vdc to 75 Vdc Inputs; 20 W
LW020 Single-Output-Series Power Modules:
Feature Descriptions (continued)
Synchronization (Optional)
The unit is capable of external synchronization from an
independent time base with a switching rate of
256 kHz. The amplitude of the synchronizing pulse
train is TTL compatible and the duty cycle ranges
between 40% and 60%. Synchronization is referenced
to VI(+).
Thermal Considerations
Introduction
The LW020 Single-Output-Series power module oper-
ates in a variety of thermal environments; however, suf-
cient cooling should be provided to help ensure
reliable operation of the unit. Heat-dissipating compo-
nents inside the unit are thermally coupled to the case.
Heat is removed by conduction, convection, and radia-
tion to the surrounding environment. Proper cooling
can be veried by measuring the case temperature.
Peak case temperature (TC) occurs at the position indi-
cated in Figure 15.
8-1265(C)
Note: Dimensions are in millimeters and (inches). Pin locations are
for reference only.
Figure 15. Case Temperature Measurement
Location
Note that the view in Figure 15 is of the metal surface
of the module—the pin locations shown are for refer-
ence. The temperature at this location should not
exceed the maximum case temperature indicated in
the derating curve shown in Figure 16. The output
power of the module should not exceed the rated
power for the module as listed in the Ordering Informa-
tion table.
Heat Transfer
Increasing airow over the module enhances the heat
transfer via convection. Figure 16 shows the maximum
power that can be dissipated by the module without
exceeding the maximum case temperature versus local
ambient temperature (TA) for natural convection
through 3.0 ms–1 (600 ft./min.).
Systems in which these power modules may be used
typically generate natural convection airow rates of
0.3 ms–1 (60 ft./min.) due to other heat-dissipating
components in the system. Therefore, the natural con-
vection condition represents airow rates of up to
0.3 ms–1 (60 ft./min.). Use of Figure 16 is shown in the
following example.
Example
What is the minimum airow necessary for a LW020A
operating at VI = 48 V, an output current of 3.6 A, and a
maximum ambient temperature of 85
°C?
Solution:
Given: VI = 48 V, IO = 3.6 A, TA = 85
°C
Determine PD (Figure 18): PD = 4.5 W
Determine airow (Figure 16): v = 1.0 ms–1
(200 ft./min.)
8-1264(C).a
Note: Conversion factor for linear feet per minute to meters per
second: 200 ft./min. = 1 ms–1.
Figure 16. Forced Convection Power Derating;
Either Orientation
19.6
(0.77)
TRIM
+
OUT
ON/OFF
NC
+
IN LW020A81
DC-DC CONVERTER
MADE IN USA
IN:DC 36-75V, 1.1A
OUT:DC 5.0V, 4A
Lucent
CASE PIN (OPTIONAL)
26.9
(1.06)
TUV Rheinland
40
60
100
0
2
MAX AMBIENT TEMPERATURE, TA (
°C)
POWER
DISSIPATION,
P
D
(W)
50
70
80
90
1
3
4
5
110
120
6
7
3.0 ms –1 (600 ft./min.)
2.0 ms –1 (400 ft./min.)
MAX CASE
TEMPERATURE
NATURAL
CONVECTION
1.0 ms –1 (200 ft./min.)
相关PDF资料
PDF描述
L6599ADTR SWITCHING CONTROLLER, PDSO16
LFA28DP 2-OUTPUT 75 W DC-DC REG PWR SUPPLY MODULE
LM2576T-12 7.5 A SWITCHING REGULATOR, 62 kHz SWITCHING FREQ-MAX, PSFM5
LS4501-7ERD0TB1 1-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE
LS4501-7ERD1TB1 1-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE
相关代理商/技术参数
参数描述
LW020A8 功能描述:CONVERTER DC/DC 5V 20W OUT RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:LW020 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入(最小):42V 电压 - 输入(最大):60V Voltage - Output 1:15V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出(最大):* 电源(瓦) - 制造商系列:150W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9-SlimMod 尺寸/尺寸:4.60" L x 1.80" W x 0.52" H(116.8mm x 45.7mm x 13.2mm) 包装:散装 工作温度:-55°C ~ 85°C 效率:* 电源(瓦特)- 最大:*
LW020A81 制造商:未知厂家 制造商全称:未知厂家 功能描述:DC-to-DC Voltage Converter
LW020A87 制造商:未知厂家 制造商全称:未知厂家 功能描述:DC-to-DC Voltage Converter
LW020A871 制造商:未知厂家 制造商全称:未知厂家 功能描述:DC-to-DC Voltage Converter
LW020AF 制造商:VISHAY 制造商全称:Vishay Siliconix 功能描述:LW020 Single-Output-Series Power Modules 36 Vdc to 75 Vdc inputs 20W